Kidde 466627 Quick start guide

Type
Quick start guide

Kidde 466627 is a multipurpose dry chemical fire extinguisher with a 2.5 lb. net agent weight and an operating pressure of 100 psi. It is suitable for use on Class A (trash, wood & paper), Class B (liquids & gases), and Class C (energized electrical equipment) fires.

The fire extinguisher has an easy-to-read gauge that tells you if it is charged and ready for use, as well as a clear instruction label with graphics to show the steps required to operate the extinguisher. It also has an easy-to-pull safety pin, a rust and impact-resistant nylon handle, and a powder-coated cylinder for corrosion protection.

Kidde 466627 is a multipurpose dry chemical fire extinguisher with a 2.5 lb. net agent weight and an operating pressure of 100 psi. It is suitable for use on Class A (trash, wood & paper), Class B (liquids & gases), and Class C (energized electrical equipment) fires.

The fire extinguisher has an easy-to-read gauge that tells you if it is charged and ready for use, as well as a clear instruction label with graphics to show the steps required to operate the extinguisher. It also has an easy-to-pull safety pin, a rust and impact-resistant nylon handle, and a powder-coated cylinder for corrosion protection.

23
Kidde Fire Safety
1016 Corporate Park Drive, Mebane, NC 27302
(800) 880-6788 www.Kidde.com
Description
Suitable for use on Class A
(trash, wood & paper), Class
B (liquids & gases) and Class
C res (energized electrical
equipment).
The Mariner 110 unit is
tted with a pressure gauge
that provides at-a-glance
status, is manufactured from
lightweight aluminum and a
tough nylon valve assembly.
Mariner 110 Fire Extinguisher
At a Glance
Model Mariner 110
Multipurpose Dry Chemical
UL listed
UL rated 1-A,10-B:C
U.S.C.G, DOT approved
Supplied with retention strap
bracket
Monoammonium Phosphate
6 year limited warranty
Suitable for use on most
common res
Multipurpose use
Net agent weight (Average) 2.5 lb.
Unit weight (Average) 3.9 lb.
Diameter 3.25 inches
Height 14.3 inches
Discharge time 8-12 seconds
Discharge range 6-8 feet
Operating pressure 100 psi
Cylinder Seamless aluminum
Valve, handle, lever Nylon
Strap Bracket U.S.C.G approved
For use on the following
types of re:
Disposable
Product Specication
Features
Easy-to-read gauge tells you
re extinguisher is charged
and ready for use
Clear instruction label using
graphics to show steps
required to operate
extinguisher
Easy-to-pull safety pin
Rust and impact resistant
nylon handle
2.5 lb. of re extinguishing
agent (Average)
6 year limited warranty
UL approved strap retention
bracket
Coast Guard (U.S.C.G)
approved when tted with
supplied mounting bracket
Powder coated cylinder for
corrosion protection
Packaging Options
Part number 466627N
UL Rated 1-A, 10-B:C
F
I
R
E
E
X
T
I
N
G
U
I
S
H
E
R
D
I
S
P
O
S
A
B
L
E
Y
E
A
R
L
I
M
I
T
E
D
W
A
R
R
A
N
T
Y
Depth Width Height
Carton 3.25 4.25 14.1
Master Pack 9.1 14.75 10.0
Packaging dimensions (inches)
6
Pt # 466627N- 6 pack
UPC: 0-47871-00627-4
I2F: 10047871006271
Includes
plastic strap
bracket
(322057)
MASTER PACK
  • Page 1 1

Kidde 466627 Quick start guide

Type
Quick start guide

Kidde 466627 is a multipurpose dry chemical fire extinguisher with a 2.5 lb. net agent weight and an operating pressure of 100 psi. It is suitable for use on Class A (trash, wood & paper), Class B (liquids & gases), and Class C (energized electrical equipment) fires.

The fire extinguisher has an easy-to-read gauge that tells you if it is charged and ready for use, as well as a clear instruction label with graphics to show the steps required to operate the extinguisher. It also has an easy-to-pull safety pin, a rust and impact-resistant nylon handle, and a powder-coated cylinder for corrosion protection.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI