Twin Star TS1500-CHR Operating instructions

Page is loading ...

CONSUMER SAFETY INFORMATION

PLEASE READ THIS MANUAL BEFORE OPERATING THIS APPLIANCE

WARNING!!

IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED

EXACTLY, AN ELECTRIC SHOCK OR FIRE MAY RESULT CAUSING

PROPERTY DAMAGE, PERSONAL INJURY OR LOSS OF LIFE.

DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPORS

AND LIQUIDS IN THE VICINITY OF THIS OR ANY OTHER APPLIANCE.

Moveable Heater

OWNERS OPERATING MANUAL

MODELS: TS1500-BLK, TS1500-OAK, TS1500-CHR

Thank you and congratulations on your purchase ofaTwin-Star International, Inc.

heater. Please read the Operating Instructions before using this appliance.

IMPORTANT: Read all instructions and warnings carefully before operating.

Failure to follow these instructions may result inapossible electric shock, fire hazard

and/or injury and will void the warranty.

E-1

Twin-Star International, Inc.

Delray Beach, FL 33445

Made in China

Printed in China

U.S.A.

For Customer Service:

www.twinstarhome.com

English Call: 866-661-1218

Español /Français Call: 866-661-1219

For product warranty registration please visit:

www.twinstarhome.com/registration

Before setting up this product please record the model number and

serial number of this product in the spaces below for in registration

and warranty reference.

Heater Model Number

Mantel Model Number

Serial Number

For product warranty registration please visit:

www.twinstarhome.com/registration

Before setting up this product please record the model number and

serial number of this product in the spaces below for in registration

and warranty reference.

Heater Model Number

Mantel Model Number

Serial Number

For product warranty registration please visit:

www.twinstarhome.com/registration

Before setting up this product please record the model number and

serial number of this product in the spaces below for in registration

and warranty reference.

Heater Model Number

Mantel Model Number

Serial Number

E-2

IMPORTANT INSTRUCTION

SAVE THESE

INSTRUCTIONS

E-3

1. Read all instructions before using this heater.

2. This heater is hot when in use. To avoid burns,

do not let bare skin touch hot surfaces. If provided,

use handles when moving this appliance. Keep

combustible materials, such as furniture, pillows,

bedding, papers, clothes and curtains at least 3 feet

(0.9 m) from the front of the heater and keep them

away from the sides and rear.

WARNING: In order to avoid overheating, do not

cover the heater. It cannot be used in a wardrobe.

3. CAUTION: Whenever the heater is left operating

and unattended, extreme caution is necessary if

children or invalids are nearby.

4. The appliance is not to be used by children or

persons with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge,

unless they have been given supervision or

instruction.

5. Children being supervised not to play with the

appliance.

6. Always unplug heater when not in use.

7. Do not operate any heater with a damaged cord or

plug or after the heater malfunctions, has been

dropped or damaged in any manner. Discard heater,

or return to authorized service facility for examination

and/or repair.

8. If the supply cord is damaged, it must be replaced

by the manufacture, its service agent or similarly

qualified persons in order to avoid a hazard.

9. Any repairs to this heater should be carried out

by a qualified service person.

10. Under no circumstances should this heater

be modified. Parts having to be removed for

servicing must be replaced prior to operating this

heater again.

11. Do not use outdoors.

12. This heater is not intended for use in bathrooms,

laundry areas and similar indoor locations. Never

locate heater where it may fall into a bathtub or other

water container.

13. Do not run cord under carpeting. Do not cover

cord with throw rugs, runners or similar coverings. Do

not route cord under furniture or appliances. Arrange

cord away from traffic areas and where it will not be

tripped over.

14. To disconnect heater, turn controls to the off, then

remove plug from outlet.

15. Connect to properly grounded outlets only.

16. This appliance, when installed, must be electrically

grounded in accordance with local codes or, in the

absence of local codes, with the current CSA C22.1

Canadian Electrical Code or for U.S.A. installations,

follow local codes and the National Electrical

Code, ANSI/NFPA NO.70.

When using electrical appliances, basic precautions should always be followed to reduce the risk of fire,

electrical shock, and injury to persons including the following:

17. There is a thermostat limiter inside the heater.

When the inner temperature over heating or occurs

abnormal heating, the thermostat protective device

would cut off power supply to avoid the heater

damaged or risk of fire.

18. The heaters must not be located immediately

below a socket-outlet.

19. Do not insert or allow foreign objects to enter any

ventilation or exhaust opening as this may cause an

electric shock or fire, or damage the heater.

20. To prevent a possible fire, do not block air intakes

or exhaust in any manner. Do not use on soft

surfaces, like a bed, where opening may become

blocked.

21. A heater has hot and arcing or sparking parts

inside. Do not use it in areas where gasoline, paint

or flammable liquids are used or stored.

22. Use this heater only as described in the

manual. Any other use not recommended by the

manufacturer may cause fire, electric shock or

injury to persons.

23. Always plug heaters directly into a wall outlet/

receptacle. Never use with an extension cord or

relocatable power tap (outlet/ power strip).

24. See directions in Figure 1.

This heater is for use on 120 volts. The cord has a

plug as shown in ﬁgure 1. See Figure 1 for grounding

instruction. An adapter as shown at C is available for

connecting three-blade grounding type plugs to two-slot

receptacles. The green grounding plug extending from

the adapter must be connected to a permanet ground

such as a properly gounnded outlet box. The adapter

should not be used if a three-slot grounded receptacle

is available.

Figure 1

GROUNDING PIN

METAL SCREW

COVER OF GROUNDED

OUTLET BOX

B

A

C

GROUNDING PIN

D

ADAPTER

GROUNDING

MEANS

Blower Assembly

PRODUCT ORIENTATION

E-4

TS1500-BLK

Part Name

PARTS LIST

Thermostat

Infrared Heater Assembly

Figure 2

Caster

Touch-up Pen

Air outlet

Caster

Control Panel

TS1500-OAK TS1500-CHR

HEATER LOCATION

When choosing a location for your new heater,

ensure that the general instructions are followed.

Also, for best effect, install the heater out of direct

sunlight.

ELECTRICAL CONNECTION

A 15 AMP, 120 Volt, 60 Hz circuit with a properly

grounded outlet is required. Preferably, the

heater will be on a dedicated circuit as other

appliances on the same circuit may cause the circuit

breaker to trip or the fuse to blow when the heater is

in operation. The unit comes standard with 6 feet

(1.8 m) three wire cord, exiting from the rear of the

heater.

CAUTION: Do not exceed the current rating of the

current tap. Always plug heaters directly into a wall

outlet/ receptacle. Never use with an extension cord or

relocatable power tap (outlet/ power strip).

CLEARANCE TO COMBUSTIBLES

Keep electrical cords, drapery, furniture and other

combustibles at least 3 feet (0.9 m) from the front of the

heater and away from the sides.

CARE AND MAINTENANCE

WARNING: Make sure the power is turned off before proceeding. Any electrical repairs or

rewiring of this unit should be carried out by a licensed electrician in accordance with

national and local codes.

If repairing or replacing any electrical component or wiring, the original wire routing, color

coding and securing locations must be followed.

WARNING: Electrical outlet wiring must comply with local building codes and other applicable

regulations to reduce the risk of fire, electrical shock and injury to persons.

WARNING: Do not use this heater if any part of it has been under water. Immediately call a

qualified service technician to inspect the heater and replace any part of the electrical system.

Warning: Disconnect power before attempting any maintenance or cleaning to reduce the risk

of fire, electrical shock or personal injury.

MAINTENANCE

WARNING: Make sure the power is turned off before proceeding. Any electrical repairs or

rewiring of this unit should be carried out by a licensed electrician in accordance with

national and local codes.

If repairing or replacing any electrical component or wiring, the original wire routing, color

coding and securing locations must be followed.

WARNING: Electrical outlet wiring must comply with local building codes and other applicable

regulations to reduce the risk of fire, electrical shock and injury to persons.

WARNING: Do not use this heater if any part of it has been under water. Immediately call a

qualified service technician to inspect the heater and replace any part of the electrical system.

Warning: Disconnect power before attempting any maintenance or cleaning to reduce the risk

of fire, electrical shock or personal injury.

Warning: During any service of this appliance, the power to the unit must be turned off.

First turn the main power switch to the “OFF” position. Then remove the electrical plug from

the wall outlet.

Cold climate installation recommendation:

when installing this unit against a

non-insulated exterior wall or chase, it is

mandatory that the outer walls be insulated

to conform to applicable insulation codes.

ELECTRICAL SPECIFICATIONS

Amps

Watts

Voltage

12.5 Amps

1,500 Watts

120 V~, 60 Hz

E-5

• Tips for using touch-up pen (TS1500-OAK and

TS1500-CHR only): For scratches, stroke in direction

of scratch. For worn areas, stroke in direction of wood

grain. Rub excess colorant promptly with a soft cloth.

• The motors used on the fan and the flame generator

assembly are pre-lubricated for extended bearing life and

require no further lubrication. However, we recommend

periodic cleaning/vacuuming of the fan/heater.

• Make sure the unit is turned OFF and unplugged

whenever you are cleaning the heater.

OPERATING INSTRUCTIONS CONTROL FUNCTIONS

Figure 4

TS1500-BLK

TS1500-CHR

TS1500-OAK

Model #

E-6

TO ACCESS CONTROL PANEL-

Control panel can be accessed on the front panel of the heater.

1000W

The 1000W switch supplies power to all the functions of the heater.

Press this button will turn on and off the heater and heater is on 1000W when it is on.

1500W

Press this button will put heater on 1500W setting.

- Heater Adjustment

The temperature control dial adjusts the heater output. Turning the dial to the left (counter-clockwise)

decrease the heater output. Turn the dial to clockwise to the right to increase the heater output.

NOTE: After the heater function or power is shutoff the blower will continue to run for several minutes to

cool the internal components.

1000W 1500W

TROUBLE SHOOTING GUIDE

SOLUTION

PROBLEM

1. Heater does not blow warm air.

1a. The ambient temperature is higher than the thermostat setting.

1b. Unplug the unit from the wall outlet for 2 hours. After 2 hours plug the

unit back into wall outlet, and operate as normal.

3c. Check if the air inlet is blocked.

2. Low air outlet speed and higher

temperature.

2a. Check if the air inlet is blocked.

MODELS: TS1500-BLK, TS1500-OAK, TS1500-CHR

BASIC WARRANTY

IF WARRANTY SERVICE IS NEEDED

1 YEAR LIMITED WARRANTY

Twin-Star ™ Heater Models

Twin-Star International, Inc.

Delray Beach, FL 33445

Made in China

Printed in China

E-7

Twin-Star International, Inc. (hereinafter referred to

collectively as the (“Company”) warrants that your

new Twin-Star Heater is free from manufacturing and

material defects for a period of one year from date

of purchase, subject to the following conditions and

limitations.

1. This heater must be installed and operated at all

times in accordance with the installation and

operating instructions furnished with the product.

Any unauthorized repair, alteration, willful abuse,

accident, or misuse of the product shall nullify

this warranty.

2. This warranty is non-transferable, and is made to

the original owner, provided that the purchase was

made through an authorized supplier of the company.

3. The warranty is limited to the repair or replacement

of part(s) found to be defective in material or

workmanship, provided that such part(s) have been

subjected to normal conditions of use and service,

after said defect is confirmed by the Company’s

inspection.

4. The Company may, at its discretion, fully discharge

all obligations with respect to this warranty by

refunding the wholesale price of the defective part(s).

5. Any installation, labor, construction, transportation,

or other related costs/expenses arising from defective

part(s), repair, replacement, or otherwise of same,

will not be covered by this warranty, nor shall the

Company assume responsibility for same.

6. The owner/user assumes all other risks, if any,

including the risk of any direct, indirect or

consequential loss or damage arising out of the

use, or inability to use the product, except as

provided by law.

7. All other warranties – expressed of implied –

with respect to the product, its components and

accessories, or any obligations/liabilities on the

part of the Company are hereby expressly excluded.

8. The Company neither assumes, nor authorizes any

third party to assume, on its behalf, any other

liabilities with respect to the sale of the Twin-Star

product.

9. The warranties as outlined within this document

do not apply to non Twin-Star accessories used in

conjunction with the installation of this product.

10. This warranty gives you specific legal rights, and

you may also have other rights which vary from

state to state.

This warranty is void if:

a. The heater is subjected to prolonged periods of

dampness or condensation.

b. Any unauthorized alteration, willful abuse,

accident, or misuse of the product.

c. You do not have the original receipt of purchase.

For update and revisions to this manual

please see our website

www.twinstarhome.com/instructions

U.S.A.

For Customer Service:

www.twinstarhome.com

English Call: 866-661-1218

Español /Français Call: 866-661-1219

For cutsomer serice: www.twinstarhome.com

or call 866-661-1218 in English, 866-661-1219 in

French, 866-661-1219 in Spanish. Make sure you have

your warranty, your sales receipt, location of purchase

and the model/serial number of your Twin-Star products.

INFORMACIÓN SOBRE SEGURIDAD PARA EL CONSUMIDOR

LEA ESTE MANUAL ANTES DE OPERAR ESTE APARATO

¡¡ADVERTENCIA!!

EN CASO DE NO SEGUIR LA INFORMACIÓN EN ESTE MANUAL

CON EXACTITUD, PODRÍAN PROVOCARSE DESCARGA ELÉCTRICA

O INCENDIO Y DAÑOS A LA PROPIEDAD, LESIONES PERSONALES O

LA PÉRDIDA DE LA VIDA.

NO GUARDE NI USE GASOLINA NI OTROS VAPORES Y LÍQUIDOS

INFLAMABLES CERCA DE ESTE APARATO, NI DE CUALQUIER OTRO.

Calentador Móvil

MANUAL DE OPERACIÓN DEL PROPIETARIO

MODELOS: TS1500-BLK, TS1500-OAK, TS1500-CHR

Gracias y felicitaciones por su adquisición de una calentador de Twin-Star International, Inc.

Lea las Instrucciones de Operación antes de utilizar este aparato.

IMPORTANTE: Lea todas las instrucciones y advertencias con detenimiento antes de

comenzar la operación. Si no se siguen las instrucciones, podría provocarse riesgo de

descarga eléctrica, incendio o lesiones y, además, la garantía perdería validez.

S-1

Twin-Star International, Inc.

Delray Beach, FL33445

EE. UU.

Impreso en China

Fabricado en China

www.twinstarhome.com

Inglés llamadas: 866-661-1218

Español /Français llamadas: 866-661-1219

Servicio de atención al cliente:

Page is loading ...

Twin Star TS1500-CHR Operating instructions

This manual is also suitable for

Twin Star TS1500-CHR Operating instructions

in other languages

Related papers

Other documents