Bushnell Legend E/L/M Series Owner's manual

Page is loading ...

5

The birth of a new Legend.

Ultra Wide Band Coating. An anti-reection

coating process that is customized for every

lens element in the optical path, maximizing

light transmission and color accuracy. The

result? Optimum brightness and true color

viewing across the full light spectrum.

Rainguard® HD. This patented

*

, permanent,

water-repellent coating causes moisture from

rain, snow, sleet or condensation to bead

up and scatter less light, so you get a clear,

bright view when other optics would be

rendered useless.

ED Prime Glass. ED Prime Extra-Low

Dispersion uorite glass delivers amazing

color resolution and contrast, and virtually

eliminates chromatic aberration and color-

fringing to bring out the most distinct details

possible in low-light conditions (L/M Series only).

Dielectric Prism Coating. A highly reective

back coating utilized to maximize light

transmission across the full visible range of

the spectrum through the binocular’s roof

prism array (M Series only).

*

U.S. Patents # 6,906,862 , 6,816,310 and 6,542,302

The latest generation of Bushnell’s Legend binocular is now

represented by three distinct series of optics, each with an

unmatched price/performance ratio. All three lines, beginning with

the Legend E Series, share a range of outstanding features :

• Magnesium Chassis- extremely strong yet lightweight.

• Rainguard®HD- Bushnell’s exclusive hydrophobic lens coating

provides a clear view even in the worst conditions. And of

course, all Legend binoculars are waterproof/ fogproof.

• BaK-4 Prisms, PC3 Phase Coating, Fully Multi-coated Optics

with Lead Free Glass- using the nest available glass and

multiple layers of anti-reective coatings ensures that the

image you view will be as bright and sharp as possible, while

helping to preserve the outdoor environment we all cherish.

• Precise, Rugged Construction and Mechanical Details- diopter

rings with ne click adjustments, an improved eyecup design

and tethered objective lens covers accommodate a wide range

of users while increasing convenience.

The L Series Legends add to this impressive list, incorporating high

density ED Prime Glass to provide even more detailed resolution

and color quality, and a lockable diopter adjustment. The M Series

oers all the technology and features of the E and L Series in an

open bridge design, along with Dielectric Prism Coatings to deliver

92% total light transmission, and represents our nest Legend

binocular to date in terms of both ergonomics and image quality.

ENGLISH

6

Thank you for purchasing your new Bushnell Legend Series E, Series L or Series M binoculars.

This manual will help you optimize your viewing experience by explaining how you can adjust the binocular

to your eyes, and how to care for this instrument. Read the instructions carefully before using your binocular.

BASIC ADJUSTMENTS

How to Adjust for Distance Between Your Eyes

The distance between the eyes, called “interpupillary distance,”

varies from person to person.

To achieve perfect alignment of lens to eyes, follow these simple steps:

1. Hold your binocular in the normal viewing position.

2. Grasp each barrel rmly. Move the barrels closer together or

further apart (Fig. 1) until you see a single circular eld. Always re-

set your binocular to this position before using it.

How to Adjust for Individual Eye Strength

As individual eyesight varies from one person to another, your Bushnell

Legend binocular has a diopter adjustment which allows you to ne-tune

the binocular to your vision. Follow the focusing instructions on the next

page.

Using the Objective Lens Covers

When using your Legend binoculars, ip open the objective lens covers

as shown at right. To prevent accidental loss, the covers are tethered to

(removable) rubber security rings. When you are nished using the binoculars,

put the covers back in place to protect the binocular’s lenses.

Fig. 1 Interpupillary Distance Adjustment

7

FOCUSING/DIOPTER ADJUSTMENT

1. Adjust the interpupillary distance (Fig. 1) until you see a single circular image.

2. The diopter adjustment ring is located directly below the right eyecup.

(Legend Series L and M only): unlock the diopter adjustment before adjusting

it, by pulling the ring straight up (Fig. 2). This may be easier if you twist the

right eyecup up rst (if you wear glasses, you can return the eyecup to the down

position after unlocking the diopter ring).

3. Start with the diopter adjustment set to “zero” (red index mark on diopter

ring is lined up with line between plus and minus marks on binocular). Keep

both eyes open at all times.

4. Using the attached lens cap or your hand, cover the objective (front) lens on

the right side of the binocular as you look into the eyepieces.

5. Using the center focus knob, focus on a distant object with ne detail (e.g.,

brick wall, tree branches, etc) until it appears as sharp as possible on the left

side.

6. Uncover the objective lens on the right side, and cover the left objective lens

while continuing to view the same object.

7. Rotate the diopter adjustment ring to bring the object into focus in the right

side of the binocular. Avoid over-turning or forcing the diopter mechanism.

If you are unable to bring the object into focus in the right side by adjusting

the diopter ring, make sure the left side is still focused and that the center

focus knob was not moved from its original setting (repeat steps #3-6 if

necessary). The diopter adjustment only aects the right side.

8. (Legend Series L and M only): once the diopter ring is set for your eyesight,

push the adjustment ring back down to lock it in place (Fig. 3).

Fig. 2

Diopter Adjustment

Ring Unlocked (Series L/M)

Fig. 3

Diopter Adjustment

Ring Locked (Series L/M)

Note: Legend E Series models do

not have a locking diopter ring-

simply turn the click-step ring to

adjust the diopter.

8

9. Your binocular should now be adjusted for your eyes. Focusing for any

distance can now be done simply by turning the center focus knob. Make

a note of your diopter setting (position of the diopter adjustment ring’s

index mark) for future reference.

EYECUP ADJUSTMENT (Fig. 4 and 5)

Your Bushnell Legend binocular is tted with twist-up eyecups designed for

your comfort and to exclude extraneous light. For users without eyeglasses,

twist the eyecups up, rotating the eyecups counter-clockwise until they lock

into the fully “up” position (Fig. 4). If you wear glasses, make sure the eyecups

are in the down position- this will bring your eyes closer to the binocular lens,

allowing you to see the full eld of view. To lower the eyecups from the full

“up” position, rotate them clockwise (Fig. 5). The eyecups may also be set to

a position midway between fully up and fully down, which may suit some

individuals better.

NECKSTRAP ATTACHMENT (Fig. 6 and 7)

To attach the neckstrap, thread the ends of the neckstrap through the strap

channel (Fig. 6) on each side of the binocular (start at the bottom of the channel

and push the strap up through the top as shown), then back through the plastic

buckle on the strap (Fig. 7). Adjust the position of the binoculars on your chest

as they hang around your neck to your preference, by changing the length of

the strap section which passes through the strap channel and buckle by an

equal amount on each side.

Fig. 4 Eyecup in “Up” Position

(for use without eyeglasses)

Fig. 5 Eyecup in “Down” Position

(for use with eyeglasses)

9

TRIPOD SOCKET (Fig. 8)

To attach the Legend

to a tripod or monopod, unscrew (counter-

clockwise) the “B” logo cap which covers the threaded socket at

the far end of the center hinge (Fig. 8), and set it aside in a safe

place. Use a compatible binocular tripod adapter accessory,

such as the Bushnell model #161001CM (see below), to attach

your Legend

to any standard tripod in a horizontal position to

provide a stable image during prolonged viewing.

WATERPROOF / FOGPROOF

Your Bushnell Legend binocular has been designed and built

utilizing the latest waterproof and fogproof technology. The

binoculars are O-ring sealed for complete moisture protection.

Fogproof protection is achieved from dry nitrogen purging that

removes all internal moisture. Bushnell’s patented Rainguard®

HD lens coating prevents external fogging, for a clear view even

in poor weather.

Binocular Tripod

Adapter (optional)

(Bushnell#161002CM)

Fig. 8 Tripod Socket Cap (shown in

place on Series M above, removed on

Series E below)

Fig. 6 Strap Lug

(L series shown)

Fig. 7 Strap

& Buckle

10

INSTRUCTIONS FOR CARE

Your Bushnell Legend binocular will provide years of trouble-free service if it receives the normal care you

would give any ne optical instrument.

1. Avoid sharp impacts. Set the binocular down gently on hard surfaces.

2. Tug on the strap after attaching it to make sure it is securely fastened to the binocular before placing it

around your neck.

3. Store your binocular in a cool, dry place whenever possible.

CLEANING

1. First, blow or brush away any dust or debris on the lens (using “canned air” or a soft lens brush).

2. To remove dirt or nger prints, clean with the supplied soft storage bag (made of washable micro-

ber cloth), rubbing in a circular motion. Use of a coarse cloth (including paper towels) or unnecessary

rubbing may scratch the lens surface and eventually cause permanent damage. The included storage

bag/micro-ber cloth is ideal for the routine cleaning of your optics. Simply breathe lightly on the lens to

provide a slight amount of moisture, then gently rub the lens with the micro-ber cloth.

3. For a more thorough cleaning, photographic lens tissue and photographic lens cleaning uid or

isopropyl alcohol may be used. Never use household window cleaning liquids. Always apply the uid to

the cleaning cloth – never directly on the lens.

NEVER LOOK DIRECTLY AT THE SUN WITH YOUR BINOCULAR,

AS IT MAY CAUSE SERIOUS DAMAGE TO YOUR EYES

11

BUSHNELL’S NO QUESTIONS ASKED LIFETIME WARRANTY

It’s Bushnell’s absolute, everlasting pledge to honor the purchase of

your Elite

®

Tactical, Elite

®

3500/4500/6500, Legend

®

, Trophy

®

,

or Trophy

®

Xtreme riescope, binocular or spotting scope with the security of our

No Questions Asked Lifetime Warranty. We’re proud to guarantee your

complete satisfaction, and promise to repair or replace your product

and ship it back to you at absolutely no charge. This fully transferable

warranty covers accidental damage, as well as any defects in materials

and workmanship, for the life of the product*. No receipt, warranty card,

or product registration is required.

A downloadable repair form and other info to ensure fast, accurate processing can be found at www.bushnell.com >

Service & Support > US/Canadian Repair Services. Please provide your contact information (name, shipping address

and daytime phone #), and a description of the defect or other reason for return. Ship the product to Bushnell, and

we will return your product or an equivalent replacement to you at no additional charge. The product should be well

packed in a sturdy outer shipping carton to prevent damage in transit, and shipped to:

*This warranty excludes electronic components, cosmetic damage that does not aect the product’s operation or performance (as determined by Bushnell), loss,

theft, and damage as a result of unauthorized repair, modication, or disassembly by someone other than a Bushnell Authorized Service Department. Bushnell will,

at our option, repair or replace the product with one of equal or similar value and/or specications.

This warranty is valid for residents of the United States and Canada only. In other countries, please contact your local dealer for applicable warranty information or go

to http://bushnell.eu. No agent, representative, dealer or unauthorized employee of Bushnell has the authority to increase or alter the obligation of this warranty.

IN CANADA Send To :

Bushnell Outdoor Products

Attn.: Repairs

140 Great Gulf Drive, Unit # B

Vaughan, Ontario L4K 5W1

IN U.S.A. Send To :

Bushnell Outdoor Products

Attn.: Repairs

9200 Cody

Overland Park, Kansas 66214

Page is loading ...