Brady Bradyprinter THT 600X-Plus II User manual

Br adyprinter

™

THT

300X-Plus II

360X-Plus II

600X-Plus II

This copyrighted guide and the label printers described herein are licensed to

Brady Corporation. All rights are reserved. Unauthorized reproduction of the

guide or the software in the label printer may result in imprisonment of up to

one year and fines of up to $10,000 (17 U.S.C.506). Copyright violators may

be subject to civil liability.

IBM

®

is a registered trademark of IBM Corporation.

Adobe

®

and Acrobat

®

are registered trademarks of Adobe Systems

Incorporated.

BradyPrinter™ is a trademark of Brady Corporation. BradyConnect

®

is a

registered trademark of Brady Corporation.

ZPL

®

and ZPL II

®

are registered trademarks of Zebra Technologies.

All other brand names, product names, or trademarks belong to their respective

holders.

Document Name: 13383L-12r1.pdf

Bradyprinter THT X-Plus II Series User Guide i

Table of Contents

Proprietary Statement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v

Product Improvements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v

FCC Compliance Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v

Canadian DOC Compliance Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi

Liability Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi

Limitation of Liability. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi

Warranty Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ix

Printers and Related Hardware Products. . . . . . . . . . . . . . . . . . . . . . . . . . . . ix

Supplies Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi

Repair Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi

Warranty Exclusions & Conditions Statement . . . . . . . . . . . . . . . . . . . . . . . . xi

Printer Software and Firmware License Agreement . . . . . . . . . . . .xiii

Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xix

Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xx

Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xx

About this Document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxi

Document Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xxii

Related Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xxv

ii Bradyprinter THT X-Plus II Series User Guide

Table of Contents

1 • Chapter 1 • Introduction1

Exterior View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Front Panel Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Front Panel Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Printer Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

2 • Chapter 2 • Getting Started9

Before You Begin. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Unpack and Inspect the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Report Shipping Damage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Store or Reship the Printer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Select a Site for the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Select a Surface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Provide Proper Operating Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Allow Proper Space . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Provide a Data Source. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Connect the Printer to a Power Source. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Power Cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Communication Interfaces. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Data Cable Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Types of Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Continuous Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Non-Continuous Black Mark Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Non-Continuous Web Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Ribbon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

3 • Chapter 3 • Printer Operation21

Load the Printer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Load Roll Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Load Fanfold Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Load Ribbon. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Remove Used Ribbon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Print a Configuration Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Calibrate the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Adjust Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Table of Contents

Bradyprinter THT X-Plus II Series User Guide iii

Media and Ribbon Sensor Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Transmissive (Media) Sensors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Adjust the Printhead . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

4 • Chapter 4 • Print Modes41

Select a Print Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Tear-Off Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Peel-Off Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Cutter Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Rewind Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Rewind Mode with Cutter Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Remove Backing from Rewind Spindle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

5 • Chapter 5 • Data Ports55

Standard Ports. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Parallel Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Serial Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

USB 2.0 Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

6 • Chapter 6 • Memory Cards65

PCMCIA Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

CompactFlash Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

7 • Chapter 7 • Front Panel Controls71

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Enter Setup Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Leave Setup Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Password-Protected Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Default Password Value. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Disable the Password Protection Feature . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Front Panel LCD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

ZebraNet

®

PrintServer II Option Display . . . . . . . . . . . . . . . . . . . . . . . . . . . 98

8 • Chapter 8 • Routine Maintenance101

Cleaning Schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102

Clean Exterior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103

Clean Interior. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103

iv Bradyprinter THT X-Plus II Series User Guide

Table of Contents

Printhead and Platen Roller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103

Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105

Snap Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107

Cutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108

Replace Fuse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109

9 • Chapter 9 • Troubleshooting111

Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112

LCD Error Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113

Print Quality Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118

Communications Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121

Printer Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123

Power-On Self Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123

Additional Printer Self Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123

Communications Diagnostics Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127

Additional Printer Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127

10 • Appendix 10 • Specifications129

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130

Standard Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130

Print Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130

Zebra Programming Language (ZPL II

®

) . . . . . . . . . . . . . . . . . . . . . . . . . . 130

Bar Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131

Agency Approvals for All Printers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132

Compliance for All Printers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132

General Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133

Electrical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133

Environmental Conditions for Operation and Storage . . . . . . . . . . . . . . . . 134

Print Specifications by Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135

Ribbon Specifications by Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136

Label Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137

BP THT 300/600X-Plus II Printers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137

BP THT 360X-Plus II Printers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140

Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143

Bradyprinter THT X-Plus II Series User Guide v

Proprietary Statement

This manual contains proprietary information of Brady Corporation. It is intended

solely for the information and use of parties operating and maintaining the equipment

described herein. Such proprietary information may not be used, reproduced, or

disclosed to any other parties for any other purpose without the expressed written

permission of Brady Corporation.

Product Improvements

Continuous improvement of products is a policy of Brady Corporation. All

specifications and designs are subject to change without notice.

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for Class B

Digital Devices, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated in a residential environment. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in accordance with the product

manuals, may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception the user is

encouraged to do one or more of the following measures:

vi Bradyprinter THT X-Plus II Series User Guide

Proprietary Statement

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

The user is cautioned that any changes or modifications not expressly approved by

Brady Corporation could void the user’s authority to operate the equipment. In order

to ensure compliance, this printer must be used with Shielded Communication Cables.

Canadian DOC Compliance Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Liability Disclaimer

Brady Corporation takes steps to assure that its published Engineering specifications

and manuals are correct; however, errors do occur. Brady Corporation reserves the

right to correct any such errors and disclaims liability resulting therefrom.

Limitation of Liability

In no event shall Brady Corporation or anyone else involved in the creation,

production or delivery of the accompanying product (including hardware and

software) be liable for any damages whatsoever (including, without limitation,

consequential damages including loss of business profits, business interruption or loss

of business information) arising out of the use of or the results of use of or inability to

use such product, even if Brady Corporation has been advised of the possibility of

such damages. Some jurisdictions do not allow the exclusion or limitation of

incidental or consequential damages, so the above limitation or exclusion may not

apply to you.

Bradyprinter THT X-Plus II Series User Guide vii

DECLARATION of CONFORMITY

BRADY CORPORATION

Declares that the following Information Technology Equipment Desktop

Series thermal transfer printers, Model -Plus II range: 300X-, 360X-, and 600X-

complies with following applicable directives and standards for the

ITE: Residential, Commercial & Light Industry environments

Applicable Directives and Supporting Standards:

89/336/EEC EMC Directive, EN55022:1998 Class B, EN55024:1998

73/23/EEC LVD Directive, EN60950:2000, CB Scheme

FCC Part 15, Subpart B, Class B, FCC Part 15.247, IC RSS-210

NOM 019-SCFI-1998

C-TICK

Manufactured for: Brady Corporation

6555 W. Good Hope Road

Milwaukee, WI 53223, USA

Effective Date: 1 January 2002

viii Bradyprinter THT X-Plus II Series User Guide

Bradyprinter THT X-Plus II Series User Guide

Warranty Information

Effective December 30, 2002

All new Brady Corporation products are warranted by the manufacturer to be free

from defect in material and workmanship.

Printers and Related Hardware Products

Proof of purchase or shipment date is required to validate the warranty period. The

warranty becomes void if the equipment is modified, improperly installed or used,

damaged by accident or neglect, or if any parts are improperly installed or replaced by

the user.

Products returned must be packaged in the original or comparable packing and

shipping container. In the event equipment is not so packaged, or if shipping damage is

evident, it will not be accepted for service under warranty. Surface transportation

charges for return to customers in the continental United States is paid by Brady

Corporation. Otherwise, Brady Corporation pays CPT (carriage paid to) nearest

airport; customer pays customs, duties, taxes, and freight from airport to destination. If

Brady Corporation determines that the product returned for warranty service or

replacement is not defective as herein defined, the customer will pay all handling and

transportation costs.

Bradyprinter THT X-Plus II Series User Guide

Printers

All printers (excluding printheads) are warranted against defect in material or

workmanship for twelve (12) months from the purchase date.

Printheads

Since printhead wear is part of normal operation, the original printhead is covered by a

limited warranty as indicated below. Warranty period begins on purchase date.

To qualify for this warranty, the printhead must be returned to the factory or to an

authorized service center. Customers are not required to purchase Genuine Brady

Corporation supplies (media and/or ribbons) for warranty qualification.

However, if it is determined that the use of inappropriate or inferior supplies has

caused any defect in the printhead for which a warranty claim is made, the user is

responsible for Brady Corporation’s labor and material charges required to repair the

defect. The warranty becomes void if the printhead is physically worn or damaged;

also if it is determined that failure to follow the preventive maintenance schedule

listed in the Users Guide has caused defect in the thermal printhead for which a

warranty claim is made.

Related Hardware Items

Products are warranted to be free of defects in material and workmanship from the

date of purchase according to this chart:

Printhead Warranty Period

Bar code label and receipt printer

printheads

6 months

Product Warranty Period

Accessories 1 month

Cables 1 month

Keyboard Display Units 6 months

Parts 3 months

BradyConnect

®

Print Servers

3 years

Bradyprinter THT X-Plus II Series User Guide

Defective product must be returned to Brady Corporation for evaluation. In the event

of notification of defect within the warranty period, Brady Corporation will replace the

defective item provided there had not been damage resulting from user abuse,

modification, improper installation or use, or damage in shipping or by accident or

neglect.

Supplies Products

Supplies are warranted to be free from defect in material and workmanship for a

period of twelve (12) months for media and twelve (12) months for ribbon from the

date of shipment by Brady Corporation. This is provided the user has complied with

storage guidelines, handling, and usage of the supplies in Brady Corporation printers.

Brady Corporation’s sole obligation under these warranties is to furnish parts and

labor for the repair or possible replacement of products found to be defective in

material or workmanship during the warranty period. Brady Corporation may in its

discretion issue a credit for any such defective products in such amount as it deems

reasonable.

Repair Services

Brady Corporation repairs are warranted against defects in material and workmanship

for 90 days from the date of repair by Brady Corporation. This excludes printheads,

which are warranted separately. This warranty does not cover normal wear and tear.

This warranty becomes void if the item is modified, improperly installed or used, or

damaged by accident, neglect, or abuse.

Warranty Exclusions & Conditions Statement

The warranties given above are the only warranties given to you. No other warranties,

express or implied, are given. Brady Corporation does not make any implied warranty

of merchantability or fitness for a particular purpose in connection with its sale of

products or services. While Brady Corporation’s desire is to be responsive to your

specific needs and questions, Brady Corporation does not assume responsibility for

any specific application to which any products are applied, including, but not limited

to, compatibility with other equipment. All statements, technical information, or

recommendations relating to Brady Corporation products are based on tests believed

to be reliable, but do not constitute a guaranty or warranty.

Bradyprinter THT X-Plus II Series User Guide

Brady Corporation’s maximum liability for warranty claims is limited to the invoice

price of the product claimed defective. Brady Corporation does not assume

responsibility for delays in replacement or repair of products. Brady Corporation shall

not under any circumstances whatsoever be liable to you or any other party for loss or

profits, lost data, diminution of goodwill, or any other special or consequential

damages whatsoever with respect to any warranty claim made by you. Specifically for

software, Brady Corporation is not liable for any incidental or consequential damages

caused by abuse or misapplication of the software or by its use in violation of the U.S.

copyright law or international treaty. No salesperson, representative, or agent of Brady

Corporation is authorized to make any guaranty, warranty, or representation that

contradicts the foregoing. Any waiver, alteration, addition, or modification to the

foregoing warranties must be in writing and signed by an executive officer of Brady

Corporation to be valid.

Brady Worldwide Identification Solutions

6555 W. Good Hope Rd.

Milwaukee, WI 53201-2131

Phone: 1.800.537.8791

Fax: 1.800.292.2289

Bradyprinter THT X-Plus II Series User Guide xiii

Printer Software and Firmware

License Agreement

YOU SHOULD CAREFULLY READ THE FOLLOWING TERMS AND

CONDITIONS OF THIS PRINTER SOFTWARE AND FIRMWARE LICENSE

AGREEMENT (“PSFLA”) BEFORE USING THE SOFTWARE, FIRMWARE OR

THE PRINTER WITH WHICH SUCH SOFTWARE OR FIRMWARE IS

ASSOCIATED (“Printer”). IF YOU DO NOT AGREE WITH THESE TERMS AND

CONDITIONS, DO NOT OPERATE THE SOFTWARE, FIRMWARE OR PRINTER

AND PLEASE PROMPTLY RETURN THE PRINTER, ENCLOSURES AND ALL

PACKAGING FOR A FULL REFUND.

Brady Corporation (“Brady”) grants you a non-exclusive, non-transferable license to

use the Software and Firmware embedded in the printer and the accompanying

documentation according to the following terms:

2. GRANT OF LICENSE. This PSFLA grants you the following rights:

• Software and Firmware. The Printer enclosed with or otherwise associated

with this Agreement has or includes certain software and firmware therein

(the “Software” and “Firmware”) which is protected by copyright laws and

international copyright treaties, as well as other intellectual property laws

and treaties. The Software and Firmware are licensed, not sold, subject to the

terms and restrictions of this PSFLA.You may use, access, display, run, or

otherwise interact with (“Run”) the Software and Firmware in connection with

xiv Bradyprinter THT X-Plus II Series User Guide

Printer Software and Firmware License Agreement

operating the printer which is enclosed with or otherwise associated with this

PSFLA (“Printer”). The primary user of the Printer may make a second copy of the

Software for his or her exclusive use on a portable computer/printer.

• Reservation of Rights. All rights not expressly granted are reserved by Brady.

• Accessing Services. Using the Software and Firmware. Your use of any service

accessible using the Software and Firmware is not covered by this PSFLA and

may be governed by separate terms of use, conditions or notices. Brady and its

suppliers and licensors hereby disclaim any such liability for any such services

accessed.

3. RESTRICTIONS.

• Copyright Notices. You must maintain all copyright notices on all copies of the

Software and Firmware.

• Limitations on certain uses and modification. You may not modify, adapt,

translate, or create derivative works based on this Software or Firmware or the

accompanying documentation. You may not use the Software or Firmware in any

manner that violates the rights of third parties.

• Limitations of Reverse Engineering, Decompilation and Disassembly. You may

not reverse engineer, decompile, or disassemble the Software or the Firmware,

except and only to the extent that such activity is permitted by applicable law

notwithstanding this limitation.

• Sublicense. You may not sublicense, distribute, rent, lease, supply, market or lend

Software or Firmware to any other party.

• Support Services. Brady may provide you with support services related to the

Software and/or Firmware (“Support Services”), in its discretion. Use of Support

Services, if any, is governed by the Brady policies and programs described in the

user guide, in online documentation, and/or other Brady-provided materials as

modified by Brady from time to time. Any supplemental Software or Firmware

code provided to you as a part of Support Services shall be considered part of the

Software and/or Firmware and is subject to the terms of this PSFLA.

• Replacement, Modification and Upgrade of the Software and/or Firmware. Brady

reserves the right to replace, modify or upgrade the Software and/or Firmware at

any time by offering you a replacement or modified version of the Software and/or

Firmware or such upgrade and to charge for such replacement, modification or

upgrade. Any such replacement or modified Software and/or Firmware code or

upgrade to the Software and/or Firmware offered to you by Brady shall be

considered part of the Software and/or Firmware and subject to the terms of this

PSFLA (unless this PSFLA is superseded by a further PSFLA accompanying such

replacement or modified version of or upgrade to the Software and/or Firmware).

In the event that Brady offers a replacement or modified version of or any upgrade

to the Software and/or Firmware, (a) your continued use of the Software and/or

Printer Software and Firmware License Agreement

Bradyprinter THT X-Plus II Series User Guide xv

Firmware is conditioned on your acceptance of such replacement or modified

version of or upgrade to the Software and/or Firmware and any accompanying

superseding PSFLA and (b) in the case of the replacement or modified Software

and/or Firmware, your termination of all use of all prior versions of the Software

and/or Firmware.

4. TERMINATION. Without prejudice to any other rights, Brady may

terminate this PSFLA if you fail to comply with the terms and conditions of

this PSFLA. In the event that Brady terminates this PSFLA, you must

immediately stop using the Software and/or Firmware, destroy all copies of

the Software and/or Firmware and all of its component parts, and, upon

request, provide an affidavit certifying your compliance with the foregoing.

5. PROPRIETARY RIGHTS. All title and copyrights in and to the Software,

Firmware, the accompanying printed materials, and any copies of the

Software and Firmware, are owned by Brady or its suppliers. All title and

intellectual property rights in and to the content which may be accessed

through use of the Software and/or Firmware are the property of the

respective content owners and may be protected by applicable copyright or

other intellectual property laws and treaties. This PSFLA grants you no

rights to use such content. If this Software and/or Firmware contains

documentation which is provided only in electronic form, you may print one

copy of such electronic documentation. You may not copy the printed

materials accompanying the Software and/or Firmware.

6. U.S. GOVERNMENT RESTRICTED RIGHTS. All Software, Firmware and/

or documentation provided to the U.S. Government pursuant to solicitations

issued on or after December 1, 1995 is provided with the commercial rights

and restrictions described elsewhere herein. All Software and/or Firmware

provided to the U.S. Government pursuant to solicitations issued prior to

December 1, 1995 is provided with RESTRICTED RIGHTS as provided for

in FAR, 48 CFR 52.227-19 (JUNE 1987) or DFARs, 48 CFR 252.227-7013

(OCT 1988), as applicable.

7. EXPORT RESTRICTIONS. You agree that you will not export or re-export

the Software and/or Firmware, any part thereof, or any process or service

that is the direct product of the Software and/or Firmware (the foregoing

collectively referred to as the “Restricted Components”), to any country,

person or entity subject to U.S. export restrictions. You specifically agree not

to export or re-export any of the Restricted Components: (i) to any country to

which the U.S. has embargoed or restricted the export of goods or services,

which currently include, but are not necessarily limited to Cuba, Iran, Iraq,

Libya, North Korea, Sudan and Syria, or to any national of any such country,

wherever located, who intends to transmit or transport the Restricted

Components back to such country; (ii) to any person or entity who you know

or have reason to know will utilize the Restricted Components in the design,

xvi Bradyprinter THT X-Plus II Series User Guide

Printer Software and Firmware License Agreement

development or production of nuclear, chemical or biological weapons; or (iii)

to any person or entity who has been prohibited from participating in U.S.

export transactions by any federal agency of the U.S. government. You

warrant and represent that neither the U.S. Commerce Department, Bureau

of Export Administration nor any other U.S. federal agency has suspended,

revoked or denied your export privileges.

8. DISCLAIMER OF WARRANTIES. BRADY AND ITS SUPPLIERS AND/

OR LICENSORS PROVIDE THE SOFTWARE AND/OR FIRMWARE “AS

IS” AND WITH ALL FAULTS, AND HEREBY DISCLAIM ALL

WARRANTIES AND CONDITIONS, EITHER EXPRESS, IMPLIED OR

STATUTORY, INCLUDING BUT NOT LIMITED TO ANY (IF ANY)

IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY,

FITNESS FOR A PARTICULAR PURPOSE, LACK OF VIRUSES, AND

LACK OF NEGLIGENCE OR LACK OF WORKMANLIKE EFFORT.

ALSO, THERE IS NO WARRANTY OR CONDITION OF TITLE, OF

QUIET ENJOYMENT, OR OF NONINFRINGEMENT. THE ENTIRE

RISK ARISING OUT OF THE USE OR PERFORMANCE OF THE

SOFTWARE AND FIRMWARE IS WITH YOU. BRADY DOES NOT

WARRANT THAT THE OPERATION OF THE SOFTWARE OR

FIRMWARE WILL BE UNINTERRUPTED OR ERROR FREE.

WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, TO

THE EXTENT THAT THE SOFTWARE AND/OR FIRMWARE COVERED BY

THIS PSFLA INCLUDES EMULATION LIBRARIES, SUCH EMULATION

LIBRARIES DO NOT WORK 100% CORRECTLY OR COVER 100% OF THE

FUNCTIONALITY OF THE PRINTER LANGUAGE BEING EMULATED,

ARE OFFERED “AS IS” AND WITH ALL FAULTS AND ALL THE

FOREGOING DISCLAIMERS AND LIMITATIONS CONTAINED IN THIS

PARAGRAPH APPLY TO SUCH EMULATION LIBRARIES.

9. EXCLUSION OF ALL DAMAGES. TO THE MAXIMUM EXTENT

PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL BRADY OR

ITS SUPPLIERS OR LICENSORS BE LIABLE FOR ANY

CONSEQUENTIAL, INCIDENTAL, DIRECT, INDIRECT, SPECIAL,

PUNITIVE, OR OTHER DAMAGES WHATSOEVER (INCLUDING,

WITHOUT LIMITATION, DAMAGES FOR ANY INJURY TO PERSON

OR PROPERTY, DAMAGES FOR LOSS OF PROFITS, BUSINESS

INTERRUPTION, LOSS OF BUSINESS INFORMATION, FOR LOSS OF

PRIVACY, FOR FAILURE TO MEET ANY DUTY INCLUDING THE

DUTIES OF GOOD FAITH OR OF REASONABLE CARE, FOR

NEGLIGENCE, AND FOR ANY PECUNIARY OR OTHER LOSS

WHATSOEVER) ARISING OUT OF OR IN ANY WAY RELATED TO THE

USE OF OR INABILITY TO USE THE SOFTWARE OR FIRMWARE

(INCLUDING, WITHOUT LIMITATION, ANY EMULATION LIBRARY

Printer Software and Firmware License Agreement

Bradyprinter THT X-Plus II Series User Guide xvii

CONTAINED THEREIN), WHETHER BASED ON CONTRACT, TORT,

NEGLIGENCE, STRICT LIABILITY OR OTHERWISE, EVEN IF BRADY

OR ANY SUPPLIER HAS BEEN ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. THIS EXCLUSION OF DAMAGES SHALL BE

EFFECTIVE EVEN IF ANY REMEDY FAILS OF ITS ESSENTIAL

PURPOSE.

10. BRADY SUPPLIERS AND LICENSORS. ANY RELEASE, DISCLAIMER

OR LIMITATION OF BRADY’S LIABILITY OR DAMAGES PURSUANT TO

THIS AGREEMENT SHALL BE CONSTRUED, IN ADDITION TO BRADY’S

BENEFIT, ALSO TO THE BENEFIT OF BRADY’S SUPPLIERS, LICENSORS,

EMPLOYEES, AND CONTRACTORS AND, WITHOUT LIMITING ANY

OTHER DEFENSES THAT SUCH SUPPLIERS, LICENSORS, EMPLOYEES

AND CONTRACTORS MAY HAVE, YOU AGREE TO RELEASE SUCH

PARTIES FROM LIABILITY OR DAMAGES IN ACCORDANCE WITH

SUCH RELEASE, DISCLAIMER, OR LIMITATION OF LIABILITY OR

DAMAGES TO THE SAME EXTENT THAT SUCH PROVISIONS APPLY TO

BRADY.

11. GOVERNING LAW. To the maximum extent permitted by law, the laws of

the State of Wisconsin, U.S.A., without regard to its conflicts of laws

provisions, will apply to this contract. Also, to the maximum extent permitted

by applicable law, the parties irrevocably agree that any litigation involving

the PSFLA, the Software, Firmware or Printer shall be brought in the state or

federal courts in the State of Wisconsin. You agree that you shall not assert

any claim that you are not subject to the jurisdiction of such courts, that the

venue is improper, that the forum is inconvenient or any similar objection,

claim or argument.

12. INJUNCTIVE RELIEF. You acknowledge that, in the event you breach any

provision of this Agreement, Brady will not have an adequate remedy in money or

damages. Brady shall therefore be entitled to obtain an injunction against such breach

from any court of competent jurisdiction immediately upon request without posting

bond. Brady’s right to obtain injunctive relief shall not limit its right to seek further

remedies.

13. ENTIRE AGREEMENT. This Agreement constitutes the entire understanding

and agreement of the parties, and supersedes any and all prior or contemporaneous

representation, understandings and agreements, between the parties with respect to

the subject matter of this Agreement. If any provision of this PSFLA is held

invalid, the remainder of this PSFLA shall continue in full force and effect.

14. ASSIGNMENT. You may not assign this PSFLA or any of your rights

hereunder (by operation of law or otherwise) without Brady’s prior written

consent. Brady may assign this Agreement without your consent. Subject to

the foregoing, this PSFLA shall be binding upon and inure to the benefit of

xviii Bradyprinter THT X-Plus II Series User Guide

Printer Software and Firmware License Agreement

the parties to it and their respective legal representatives, successors and

permitted assigns.

15. CONFIDENTIAL INFORMATION. You acknowledge that the Software and

Firmware embody confidential information owned by Brady and/or its licensors. To

the extent you have access to any such information, you agree to use such

information only for the authorized use of the Software and Firmware. You further

agree not to disclose such confidential information to any other party and to use at

least the same degree of care to maintain the confidential nature of such information

as you use to maintain the confidentiality of your own confidential information.

16. MODIFICATION. No modification of this Agreement shall be binding unless it

is in writing and is signed by an authorized representative of the party against

whom enforcement of the modification is sought.

17. WAIVER. The failure by a party to exercise any right hereunder shall not operate

as a waiver of such party’s right to exercise such right or any other right in the

future.

18. QUESTIONS. Should you have any questions, or if you desire to contact

Brady for any reason, please contact the Brady subsidiary serving your

country, or write: Brady Corporation, 6555 West Good Hope Road, Milwaukee,

WI. 53223.

Page is loading ...

Brady Bradyprinter THT 600X-Plus II, Bradyprinter THT 300X-PLUS, Bradyprinter THT 300X-Plus II, Bradyprinter THT 360X-PLUS, Bradyprinter THT 360X-Plus II User manual

Related papers

Other documents