Automate 7145A Owner's manual

Brand: Automate

Model: 7145A

Type: Owner's manual

5305A 510 5A 4105A

Compatible with the

following models:

REPLACEMENT TRANSMITTER

P/N 7145A

REPLACEMENT TRANSMITTER

4-Button Remote Control

The following Learn Routine is used to program this replacement

remote control to your system.

Prepare the vehicle system for pairing

1. Door. Open a door.

2. Key. Turn the key to the ON position.

3. Choose. Within 5 seconds, press and release the Control

Center/Valet button once. Then, press the Control Center/Valet

button once more and hold it. The LED flashes one time and the

siren/horn sounds (if connected) to confirm entry Into remote

pairing. DO NOT release the Control Center/Valet button.

4. Transmit. While holding the Control Center/Valet button, press

the

AUX

button on the remote. The siren/horn sounds (if connect-

ed) to confirm that the remote has been paired to the receiver.

5. Release. Now that the remote control has been paired, you can

release the Control Center/Valet button and remove the key.

Note: Refer to owner’s guide for remote control operation.

FCC/ID Notice

This device complies with Part 15 of FCC rules. Opera-

tion is subject to the following conditions: (1) This

device may not cause harmful interference, and (2) This

device must accept any interference received, including

interference that may cause undesired operation.

CAUTION! Changes or modiﬁcations not expressly

approved by the party responsible for compliance could

void the user’s authority to operate this device.

WWW.DIRECTED.COM

MADE IN TAIWAN

P/N 7145A

11/18

WARNING: This product can expose

you to chemicals including DEHP, which

is known to the State of Califotrnia to

cause cancer and birth defects or other

reproductive harm. For more information,

go to www.P65Warnings.ca.gov

560-10154 (R1.0)

Automate 7145A Owner's manual

Automate 7145A Owner's manual

Automate 7145A Owner's manual

Related papers

Other documents