C2G 40381 Owner's manual

C2G
Brand
C2G
Model
40381
Type
Owner's manual
Chapter
I.
Product Introduction
1
ct
Acoustics is your best choice for professional PC to TVIHDTV Scan Converter. It accepts input
VGA resolution up to 1600 x 1200 in 16.7 million
-
color depth. lrnpact Acoustics converts the computer
image into IV and HDTV (High Definition TV) with finest quality, which is the most effective way of turning
your PC into a wide screen
TV.
Impact Acoustics offers powerful features such as, 64 Position Marks,
9
-
level Adaptive Flicker Control, Video Quality Enhancement, Liner Zoom
-
n
-
Pan, and Remote Control to
provide crisper video image and user
-
friendly environments.
can Gonveder
Supports HDTV Dl (480i1576i), D2 (480p/576p), 03 (1080i) and D4 (720p) video resolution
Supports
Y
Pb Pr (Component) video out to HDTV
Switches video to NISC and PAL TV
Supports Composite
(AIV) and S
-
Video out
Accepts VGA resolution from 640x480 up to 1600x1200 in 16.7 million
-
color depth
Supports with
l~M@com~atible PCs and laptop PCs (with VGA output port)
Plug
-
n
-
play (No! software required)
Simultaneous display on PC monitor and
HDTVITV
Full functions Infrared Remote Control
Full screen Underscan
I
Qverscan
9
-
level Adaptive Flicker Control adjustment
Video Quality Enhancement
Supports
"
Power Down Pass
-
Through
"
function when system is off (Between VGA and monitor)
Supports OSD (On Screen Display) function
TVIHDIV Brightness, Contrast, and Sharpness control
Horizontal and Vertical frequency detection to adjust picture position
Linear Zoom and Pan function
Save settings during power
-
off
64 Position Marks to save after Zooming and Panning
Screen Freeze
function
1:1 Analog to Digital sarnple rate
Horizontal Frequency:
31.5KHz
-
80KHz
Vertical Frequency: 50Hz
-
150Hz (Please refer to the Supported VGA Modes on page 15)
Vertical lines: 1200 lines
(1)
Composite Video (AV)
-
NTSCIPAL
(2)
S
-
VHS Video
-
NTSCIPAL
(3)
Y
Pb Pr (Component)- 480il576i (Dl), 480pl576p (D2), '1080i (D3), and 720p (84)
(4) Computer Monitor
ion:
98(w)
x
24(H) x 141 (L) mm
18Og (device net weight)
I.
Scan Converter box
Check your Impact Acoustics pack;
-
'
i
a.
VGA Cable
. Compos~te Vldeo
(AN)
Cable
Mk
for the following items
Remote Control (with battery)
Y
Pb
Pr
(Component) V~deo
User's Manual
l~~@compatible PCs and laptop PCs (with VGA output port)
*
TV, HDTV, or Projector
*
Business and education presentation
*
Demonstration tape production
*
Educational aid
-
tools
*
Home entertainment
+
HDTV
signal generator
. Power Adapter
.
S-Video
Cable
1
6.
Connecting to PC Monitor.
I
(Please
refer
to
Chapter
3.4
on
Page
10)
(Please refer to Figure
2
on page
3)
tep
1:
Turn
off
your isconnect
th
:
Disconnect the Monitor Cable from your computer VGA port.
:
Connect the Scan Converter to PC VGA port:
Plug one end of the supplied
"V
le
"
to the Scan Converter box
"
other end to the PC's VGA port.
:
Connect the Scan Converter to PC Monitor:
Plug one end of PC's Monitor Cable to the Scan Converter box
:
Connect one end of supplied
''
other end to an electrical outlet
ate:
To
avoid
damaging your Scan Converter,
use
only
the
supplied Power
Adapter.
81111
(Please refer to Figure
3
as below)
ote:
S
-
Video provides a higher qualit), video than Composite Video and should be used if your TV has a
S
-
Video Input.
ldeo
(AIV)
Cable
"
lo the TV's
Crrmposife Video
(AN)
Gable
ote:
The converted Computer Image will transfer
Port
"
by using the S
-
Video Cable or Composite Vide1
to
nl
through
"
S
-
Video (NTSCIPAL) Output
1
(AN) Cable.
(Please refer to Figure
4
as
below)
using
the
Y
Pb Pr (Component) Video Cable,
Pr
(Component) Video Cable
tlr
Make sure your lmpact Acoustics is secured and correct install with your PC. (Please refer to the
Hardware lnstallation
"
'Connecting Impact Acoustics to your PC
"
in Chapter
2.2
an page 4)
Make sure your lmpact Acoustics is secured and correct install with your TV. (Please refer
to tho
Hardware Installation
"
Connecting lmpact Acoustics to your TV
"
in Chapter
2.3
on page 4)
Turn on your PC, and check with VGA resolution. Impact Acoustics can convert the VGA resolution from
640x480 up to 1600x1200.
It accepts the VGA refresh rate (vertical frequency) from
60Hz tol50Hz,
which is depending on different VGA resolution. Please refer to
"
Supported VGA Modes
"
in Appendix on
page 15.
Press
Power button on the lmpact Acoustics box, the LED light will be on when the Power Adapter is
plugged in.
Turn on your TV, and select the external input source (for example: Video 1,
Linel or Inputl) to which you
have connected the lmpact Acoustics.
tton
on the Impact Acoustics box to switch the Computer Image into NTSC or
ote:
If your TV
-
screen image cannot display properly (no display, or appears black and white with
unstable signal), please press the
"
L"
button again to match your TV system as NTSC or PAL
(Please refer to your TV document to check with your TV system).
Make sure your lmpact Acoustics is secured and correct install with your PC. (Please refer to the
Hardware
lnstallation
"
Cannecting lmpact Acoustics to your PC
"
in Chapter
2.2
on page 4)
Make sure your Impact Acoustics is secured and correct install
with your WDTV. (Please refer to the
Hardware
lnstallation
"
Connecting lmpact Acoustics to your HDTV
"
in Chapter 2.4 on page 5)
Turn an your PC, and check with VGA resolution. lmpact Acoustics can convert the VGA resolution From
640x480 up to
1600x?200.
If.
accepts the VGA refresh rate (vertical frequency) from 60Hz tol50Wz,
which is depending on different VGA resolution. Please refer to
"
Supported VGA Modes
"
in Appendix on
page 15.
ower
button on the Impact AcauStics box, the LED light will be an when the Power Adapter is
plugged in.
Turn on your HDTV, and
selecl the external input source (for example: Y Pb Pr Input) to which you have
connected the lmpact Acoustics.
coustics box to switch the Computer Image into HDTV.
7.
If
you also connect the Impact Acoustics lo HDTV via S
-
Video or Composite Video Cable, press
button will switch Computer Image into HDTV as TV resolution.
ole:
If your TV
-
screen image cannot display properly (no display, or appears black and white with
"
button again to match your TV system as NTSC or PAL
(Please refer to your
'TV document to check with your TV system).
The default setting is
FIT
mode, Impact Acoustics converts the corriputer image to a television irnage by using
horizontallvertical scaling and frame rate converting. The computer image will convert to television and
display as the
same television video resolution, (Please refer the example as below)
When
I:?
mode is active, Impact Acoustics takes
1:l
AID (Analog to Digital) sampling rate of incoming
computer image, which can convert the cornputer image to a television image without
horizontallvertical
scaling. You will get the
1:l
computer image on television at high fidelity with less distortion. (Please refer the
example as below)
ode to get
1
TSC)
a
Impact Acoustics provides Video Quality Enhancement function to erase Horizontal Video jitter, which can
enhapce the video quality on TV or HDTV.
Step
1:
Simply press the
"
UALlTK
+
I
-
"
button on the Remote Control to adjust the best Colnputer Image
on your TV!HDTV.
nd refers to how much light is emitted from the display.
+
I
-
"
button an the Remote Control to adjust the Brightness level
on your
TV!HDTV.
e apparent difference in brightness between light and dark areas of an image.
Adjust the contrast setting
c
the highlights and shadows in TVIWDTV video.
Step
I
:
Simply press the
"
+
I
-
"
lnutton on the Remote Control to adjust the Contrast level on
your
TVIHDTV.
Adjust the Sharpness level will sharpen or soften the video edges, such as the edge or text letter will become
crisper and blur.
Step
1
:
Simply press the
"
+I
-
"
button on the Remote Control to adjust the best Computer
lmage on your
TV!HDTV.
Convert the De
-
interlace VGA signal to the Interlace TV signal will cause the flicker in image. If user wants
to work on a spreadsheet while watching a movie in a window, both the text
-
intensive application requiring
more flicker filtering and the movie requiring less flicker filtering can look their best. As text and graphic
require different levels of Flicker reduction for optimal effect, Impact Acoustics
9
level Adaptive Flicker Control
will provide with more satisfactory results across various application.
Step
1:
Simply press the
"
You can move the Computer linage on your TVIHDTV, and adjust both the screen width and height.
emote Control to move the Computer lmage an TVIHDTV
screen vertically.
emote Control to move the Computer lmage on TVIHDTV
screen horizontally.
I
entation or demonstration, you can enlarge computer screen on TV
and pan around freely to any part
OF
the screen.
(,
Step
I:
Impact Acoustics provide 64 level zooming function, just press
"
+
"
button on your Remote
Control to zoom out Computer lmage on TVIHDTV.
Remote Control to zoom in Computer lmage on TVIHDTV.
"
button on Remote Control to move zoomed image position.
n on Rernote Control will bring
your Computer lmage to the normal
position.
utton on Remote Control will freeze the image on the television; you can make
t your audience watching it.
utton second time to un
-
Freeze the image.
ming size and panning position as one
on Remote Control
Mar
this function.
ave the Zooming size and Panning position and memarized as one Position Mark, you can create 64
Position Marks from
Mark1 to Mark64.
T:
Jump to next Position Mark.
V:
Go back to previous Position Mark.
:
Press the button and hold for three seconds to clear all Position Marks.
0
nl
W
co
r Image on NIHDTV, some of the image sent lo a TV can extend past the visible
area of the T'V screen. You can toggle between Overscan and Underscan setting to get the suitable image
size on TV.
utton on your Remote Control to enable the Qverscan
fur~ction. The image
utton again on your Remote Control
to enable the Underscan function. The
Computer lmage will be completely display on TVIHDTV.
Impact Acoustics offers Front Panel Control to access the most comn~only used function.
Front Panel Control has four buttons; which can provide the two different operation modes,
When you power on Impact Acoustics, or turn off the OSD Menu, you will stay in
"
Regular Operation Mode
"
,
the Front Panel Control Buttons will be defined as:
Press this button to open the OSD Menu (entry the OSD Menu Mode)
Press this button to display
Computer lmage on your TV screen, press it again to
toggle between
NTSC and PAL TV system.
ote:
The indicator
LED
will turn
available while you conne~t to
Press this button to display Computer lmage on your MDTV screen, press it again
to toggle between
Dl
to
D4
video resolution on HDTV system.
Note:
The indicator LED will turn on as
Erase Mor~zontal Video jitter, enhance the v~deo quality on WHDTV
Increase or decrease the br~ghlness level on TVIHDTV
Adj~ist the contrast settmg to accentuate the h~ghlights and shadows In TVIHD7V v~deo
Adjust the Sharpness level will sharpen or soften the video edges
:
(9
-
level Adaptwe Flicker Control adjustment)
Text and
graph~c requlre different levels of flicker reduction for optimal effect, Impact Acoust~cs
9
level
Adaptive
Fl~cker Control will provide w~th more satrsfactory results across varlous application
Move the Computer
lmage on TVIWDTV screen
horizontally
Move the Computer lmaye on TVIWDTV screen vert~cally
ut of the Computer lmage on TVlHDTV screen
Menu
settrng opt~on to the default value
Impact Acoust~cs oRers full funct~on Remote Control to let you operate
Scan Converter as easy and
conven~ent way
4:
Please remove the tab from battery compartment at the back of
the Remote Control
2:
Wh~le uslng the Remote Control, am 11 at the Infrared Sensor
The Infrared Sensor
IS
located at the front panel of the Impact. Acoust~cs
box
:
Switch the Impact Acoustics onloff.
:
Adjust the Sharpness level on TVlHDTV image.
OM:
Zoom in and out of the Computer Image on TVlMDTV screen.
:
Adjust the Brightness level on TVIHDTV image.
OSD Menu.
on
OSD Menu.
:
Press this button to freeze the image on the TVIHDTV.
his button to convert the Computer Image lo NTSC
TV
system.
:
The home setting will bring your image back to the normal position.
Save the Zooming sire and Panning position, and memorized as one Position Mark.
:
Jump to
next
Position Mark.
Go back to previous Position Mark.
:
Press this button and hold for three seconds to clear all Position Mark.
Appendix
I
Table
of
supported
VGA
Modcas
Page
............
15
FAQ
Page
............
16
This
table
list
supported
VEA
display
mode to
convert
signal
into
TV
and
HDTV
screen
ion
1
There is no display on my TVIHDTV screen
Check all the Cable ends are positioned correctly when connecting.
Make sure lmpact Acoustics is secured and correct install with your TV or
HDTV. (Please refer to the
Hardware lnstallation in Chapter 2.312.4 or1
page 4 and page
5)
Check with your TVIHDTV setting, select the external input source (for
example: Video
1,
Line1 or Inputl) to which you have connected the
lmpact Acoustics.
If you are using the laptop computer, please
make sure its has been
switched to External VGA display mode (Please refer to your laptop's
manual).
If you connect Impact Acoustics to TV, you have to press the
"NTSCIPAAL" button to display the Computer Image on TV.
If you connect Impact Acoustics to HDTV, you have to press the
"DllD2iD31D4" button to display the Computer Image on HDTV.
ion
TVIHD'TV display a Blue Screen with
"
NO VGA SIGNAL
"
error message
Check the connection between lmpact Acoustics and PC VGA port.
"
is secured and correct connect with your
to the Hardware Installation in Chapter
2.2
page
4)
Make sure your PC is turn on and display properly on PC monitor.
If
you are using the laptop computer, please make sure its has been
switched to External VGA display mode (Please refer
to your laptop's
manual).
1.
Press the Power Button on lmpact Acoustics box or Remote Control. The
LED
will light up on the front of the panel.
2.
Please make sure the Power Adapter is securely connected into an
electrical outlet and connected to the lmpact Acoustics DC
-
IN Jack.
3. To avoid damaging your
lrnpact Acoustics, use only the supplied Power
Adapter.
4.
Check the power source using another electrical device to make sure the
power source is supplying sufficient voltage,
oinr:
blurry and fuzzy, which won't look exactly the same as the original image
displayed on VGA monitor.
Blurry fonts on television are really a limitation of the TV set and the analog
video signal.
There are many things
you can do to improve the situation.
1,
If your
TV
has an S
-
Video Input, please use S
-
Video connection instead of
Composite video.
S-video provides crisper picture with less distortion.
2.
Please adjust your VGA display Modes as 640~480(60Hz),
800~600(60Hz),
or
1024~768(6011z) lo display the best video quality on
your
TV.
3.
Please adjust CONTRAST, SHARPNESS, QIJAI-ITY, and FLICKER
Control setting on lmpact Acoustics.
4.
Increase the sire of the fonts being displayed on you PC. The small text
sizes
commonly used for
PC
can appear blurred or unclear on a TV. You
can adjust VGA setting by using large fonts. (Please consult your VGA
card documentation for more detail information)
Picture appears black and white on
the TV
&G
Impact Acoustics Scan Converter offer both NTSC and PAL Video output
system in the same unit. Depending on where you plan on using your scan
converter, you can
determ~ne your lrnpact Acoustics Video output system
specification
(Please consult your television documentation to determine
whether your TV
supports NTSC and PAL input and how to configure it
)
L"
button on lmpact Acoust~cs box or
Remote Contr
2.
If your VGA resolution or refresh rate (vertical frequency) is too high,
please change your setting and selecting the properly VGA Modes.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18

C2G 40381 Owner's manual

C2G
Brand
C2G
Model
40381
Type
Owner's manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents