2. bora
  3. PM-7004 Wheel Kit

bora PM-7004 Wheel Kit Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the bora PM-7004 Wheel Kit Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Troy, MI 48083 USA
© 2020 Bora Tool Part# PM-7004
Parts Included:
2 x H215 8” Wheels
2 x C433 5/16”-18 X 2-1/2” Carriage Bolt
2 x C202 5/16”-18 Nyloc Nut
2 x C204 5/16” Flat Washer
1 x Axle Bracket
2 x E-Clips
Step 3
Install the wheels on the axle ends
Step 1
Remove your existing wheels and axle if
applicable
Step 2
Install the axle on your miter saw frame using the
provided hardware
Step 4
Secure the e-clips on the axle ends in the slots
Upgrade or replace your existing PM-7000 Miter Saw Stand
wheels for maneuverability.
PM-7004 Wheel Kit
/