bora PM-7004 Wheel Kit Operating instructions

Troy, MI 48083 USA

Parts Included:

2 x H215 8” Wheels

2 x C433 5/16”-18 X 2-1/2” Carriage Bolt

2 x C202 5/16”-18 Nyloc Nut

2 x C204 5/16” Flat Washer

1 x Axle Bracket

2 x E-Clips

Step 3

Install the wheels on the axle ends

Step 1

Remove your existing wheels and axle if

applicable

Step 2

Install the axle on your miter saw frame using the

provided hardware

Step 4

Secure the e-clips on the axle ends in the slots

Upgrade or replace your existing PM-7000 Miter Saw Stand

wheels for maneuverability.

PM-7004 Wheel Kit