Hear Technologies extreme extender ADAT IN User manual

Brand
Hear Technologies
Model
extreme extender ADAT IN
Type
User manual

This manual is also suitable for

user guide
Part No. LIT002660UG
c
2002, Hear Technologies
12-2002
TM
EXTREME EXTENDER ADAT IN/OUT
EXTENDER FEATURES:
• Extend ADAT® Optical cables up to 500 feet
• Convert HearBus to ADAT® Optical or vice versa
• Uses standard CAT5E cables
• Does not affect sound quality
• Small size, durable construction
• Clock Status LED on Extreme Extender OUT
The Extreme Extender ADAT
®
In & Extreme Extender ADAT
®
Out convert
ADAT® optical to a HearBus signal, using CAT5E, to extend connections an
additional 500 feet.
The Extreme Extender ADAT
®
In has an ADAT® optical input. A buffered
ADAT
®
thru acts as an optical splitter to give local ADAT
®
connection to the
source. The Extreme Extender ADAT
®
In output is a RJ45 HearBus
connection for the CAT5E cable. The Extreme Extender ADAT
®
In uses a 9
Volt DC supply to power the system. (When used with Hear Back system
power is supplied from the HearBus Hub connection).
The Extreme Extender ADAT® Out has a RJ45 HearBus input connector and
two ADAT® optical outputs. A bus status indicator is provided.
A bi-color clock
status LED indicates the presence (green) or absence (red) of the ADAT clock.
In addition to acting as an ADAT® optical extender, the Extreme Extender ADAT®
In may be connected to the optical output of any ADAT® device, such as a DAW,
mixer, etc. and connected to the input of a Hear Back hub.
The extreme extender ADAT® Out can be connected to the HearBus out of a hub
to obtain two ADAT® outputs.
CABLES - Quality cables that work with your Extreme Extender.
CAT5E cables
are available in
2, 12, 25, 50,
and 100 foot
lengths.
Optical cables
are available in 6,
12, and 25 foot
lengths.
Compatible with Hear Back system.
For use with any ADAT® Optical device ONLY. Other optical formats not supported.
ADAT® is a registered trademark of Alesis Corporation.
A
D
A
T
I
NPU
T
D
e
v
i
c
e
A
D
A
T
I
NPU
T
D
e
v
i
c
e
A
D
A
T
O
U
T
PU
T
D
e
v
i
c
e
A
D
A
T
I
NPU
T
D
e
v
i
c
e
e
x
treme
e
x
te
n
d
er
A
D
A
T
I
N
e
x
treme
e
x
te
n
d
er
A
D
A
T
I
N
e
x
treme
e
x
te
n
d
er
A
D
A
T
O
U
T
500'
C
A
T
5
E
C
a
b
l
e
s
i
g
n
a
l
d
i
re
c
t
i
o
n
9V
ADAT IN
ADAT THRU
HearBus Out
9VDC
PWR
ADAT OUT ADAT OUT
HearBus IN
CLK
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Statement
EXTREME EXTENDER ADAT IN/OUT
EXTENDER FEATURES:
• Extend ADAT® Optical cables up to 500 feet
• Convert HearBus to ADAT® Optical or vice versa
• Uses standard CAT5E cables
• Does not affect sound quality
• Small size, durable construction
• Clock Status LED on Extreme Extender OUT
The Extreme Extender ADAT
®
In & Extreme Extender ADAT
®
Out convert
ADAT® optical to a HearBus signal, using CAT5E, to extend connections an
additional 500 feet.
The Extreme Extender ADAT
®
In has an ADAT® optical input. A buffered
ADAT
®
thru acts as an optical splitter to give local ADAT
®
connection to the
source. The Extreme Extender ADAT
®
In output is a RJ45 HearBus
connection for the CAT5E cable. The Extreme Extender ADAT
®
In uses a 9
Volt DC supply to power the system. (When used with Hear Back system
power is supplied from the HearBus Hub connection).
The Extreme Extender ADAT® Out has a RJ45 HearBus input connector and
two ADAT® optical outputs. A bus status indicator is provided.
A bi-color clock
status LED indicates the presence (green) or absence (red) of the ADAT clock.
In addition to acting as an ADAT® optical extender, the Extreme Extender ADAT®
In may be connected to the optical output of any ADAT® device, such as a DAW,
mixer, etc. and connected to the input of a Hear Back hub.
The extreme extender ADAT® Out can be connected to the HearBus out of a hub
to obtain two ADAT® outputs.
CABLES - Quality cables that work with your Extreme Extender.
CAT5E cables
are available in
2, 12, 25, 50,
and 100 foot
lengths.
Optical cables
are available in 6,
12, and 25 foot
lengths.
Compatible with Hear Back system.
For use with any ADAT® Optical device ONLY. Other optical formats not supported.
ADAT® is a registered trademark of Alesis Corporation.
A
D
A
T
I
NPU
T
D
e
v
i
c
e
A
D
A
T
I
NPU
T
D
e
v
i
c
e
A
D
A
T
O
U
T
PU
T
D
e
v
i
c
e
A
D
A
T
I
NPU
T
D
e
v
i
c
e
e
x
treme
e
x
te
n
d
er
A
D
A
T
I
N
e
x
treme
e
x
te
n
d
er
A
D
A
T
I
N
e
x
treme
e
x
te
n
d
er
A
D
A
T
O
U
T
500'
C
A
T
5
E
C
a
b
l
e
s
i
g
n
a
l
d
i
re
c
t
i
o
n
9V
ADAT IN
ADAT THRU
HearBus Out
9VDC
PWR
ADAT OUT ADAT OUT
HearBus IN
CLK
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Statement
user guide
Part No. LIT002660UG
c
2002, Hear Technologies
12-2002
TM
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Hear Technologies extreme extender ADAT IN User manual

Brand
Hear Technologies
Model
extreme extender ADAT IN
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents