Lumex LF2020 Easy Lift STS User manual

Type
User manual

This manual is also suitable for

LF2020-INS-LAB-RevG18
Read this manual before operating your Easy Lift Sit-to-Stand.
Save this manual for future use.
LF2020 EASY LIFT SIT-TO-STAND
LF2090 BARIATRIC EASY LIFT SIT-TO-STAND
USER MANUAL
LF2020-INS-LAB-RevG18
2
CONTENTS
1 INTRODUCTION .............................................................................................................................. 3
2 SAFETY PRECAUTIONS ................................................................................................................ 4
WARNINGS ................................................................................................................................ 4
3 FEATURES ...................................................................................................................................... 6
EASY LIFT SIT-TO-STAND FEATURES ................................................................................... 6
CONTROL BOX FEATURES ..................................................................................................... 6
4 HANDLING PROCEDURES ............................................................................................................ 7
SHIPPING AND TRANSPORTATION INSTRUCTIONS ............................................................ 7
5 ASSEMBLY INSTRUCTIONS .......................................................................................................... 8
CHARGING THE BATTERIES ................................................................................................... 9
CHECKING BATTERY CAPACITY ............................................................................................ 9
ALARM BUZZERS ..................................................................................................................... 9
6 OPERATING INSTRUCTIONS ...................................................................................................... 10
LIFTING THE PATIENT ............................................................................................................. 11
7 CARE AND MAINTENANCE ......................................................................................................... 13
BEFORE EACH USE ............................................................................................................... 13
AT LEAST ONCE A MONTH ................................................................................................... 13
LUBRICATION ......................................................................................................................... 13
CLEANING ............................................................................................................................... 13
CARE OF SLINGS ................................................................................................................... 13
MAINTENANCE SCHEDULE .................................................................................................. 14
8 TROUBLESHOOTING ................................................................................................................... 15
9 SPECIFICATIONS ......................................................................................................................... 16
10 LIMITED WARRANTY ................................................................................................................... 17
11 INDEX ............................................................................................................................................ 19
LF2020-INS-LAB-RevG18
3
1 INTRODUCTION
Congratulations on your purchase of the Lumex LF2020 Easy Lift Sit-to-Stand (STS) /
LF2090 Bariatric Easy Lift Sit-to-Stand (STS). The following pages will provide you with important
safety and operating instructions on the use of patient lifts, slings, and accessories, as well as
maintenance and warranty information. Read this manual carefully before operating your patient
lift and refer to it as often as needed. Consult your authorized distributor and/or healthcare
professional with any questions or concerns regarding safe and effective techniques for operating
your patient lift.
DO NOT attempt any transfer without prior approval of the patient’s healthcare provider. With
their assistance, select the sling that best serves the needs, abilities, comfort and safety of the
person being lifted. It is important that you use correct slings adapted to the body shape and
weight and ability of the patient and the specic type of transfer needed.
Upon receipt of the patient lift, and prior to each use, inspect it closely to ensure that nothing
is damaged, there are no loose or broken parts, that all patient lift parts are in the proper place,
etc. Immediately replace any worn or broken components. Your patient lift should receive
maintenance on a regular schedule and should be inspected daily for proper operation. Contact
GF Technical Support at 1.770.368.4700 with any maintenance concerns.
Before lifting anyone, thoroughly read the instructions in this manual. Ideally, observe a team of
trained experts performing the lifting procedures. The operator should then practice the entire
lifting procedure several times with proper supervision and with a capable individual acting as
patient. It is extremely important to know how a patient will feel in the patient lift. We suggest that
the operator try all the various lifting slings and equipment until the operator is condent with
how the patient lift operates. The lifting procedures should be explained to the patient before the
actual lifting. Remember that safety requires the constant attention of the lift occupant and the
operator. Use extreme care and common sense when operating a patient lift.
This guide covers the use of the LF2020 Easy Lift STS / LF2090 Bariatric Easy Lift STS. Keep in mind
that the basic safety procedures included in this manual are to be used as a guide only. You may nd it
necessary to develop your own unique methods for safely utilizing the patient lift. Again, consult your
healthcare professionals for their recommendations and never hesitate to ask for their assistance.
Info: Before attempting to assemble the patient lift, refer to the section titled “ASSEMBLY
INSTRUCTIONS” contained elsewhere in this manual. Contact GF Tech Support at
1.770.368.4700 or your GF authorized distributor if additional assistance is needed.
Info: In this manual, the person being lifted is referred to as the “patient” or “occupant” and
the person operating the patient lift is called the “operator” or “attendant”.
Intended use
The Lumex LF2020 Easy Lift STS / LF2090 Bariatric Easy Lift STS is intended to aid in the transfer
of an individual who is unable to independently transfer between bed, chair, bathtub, wheelchair,
and/or commode.
WARNING: The LF2020 Easy Lift STS / LF2090 Bariatric Easy Lift STS is designed for
transfer only (to and from bed, chair, bathtub, toilet, wheelchair, commode etc.). This
Patient Lift is not intended to be used for transporting or moving a patient from one
location to another.
WARNING: The LF2020 Easy Lift STS / LF2090 Bariatric Easy Lift STS is designed for use
by individuals who can support the majority of their own weight. Special care must be
taken with patients who cannot provide assistance while being lifted (i.e. such as patients
who are comatose, spastic, agitated or otherwise severely disabled).
LF2020-INS-LAB-RevG18
4
2 SAFETY PRECAUTIONS
IMPORTANT: Before using patient lift, read and adhere to the following safety precautions
and warnings. Failure to do so could result in serious personal injury or damage to your
patient lift.
Always consult your healthcare professional to determine safe methods most suitable for
your individual abilities. Protect yourself, your attendant and patient lift by having it serviced
regularly. If you experience any malfunction, contact GF Tech Support at 1.770.368.4700 or your GF
authorized distributor immediately, as a hazardous condition could result, causing personal injury
or damage to your patient lift.
Periodic inspection, adjustment and replacement of worn parts are necessary to provide years of
excellent service. Refer to CARE AND MAINTENANCE section of this manual.
Maintenance MUST be performed by qualied personnel ONLY.
Signicance of safety statements
Note the following special statements, used throughout this manual, and their signicance:
WARNING: Indicates a potential hazard situation or unsafe practice that, if not avoided,
could result in death or serious personal injury.
CAUTION: Indicates a potential hazard situation or unsafe practice that, if not avoided,
could result in minor or moderate personal injury.
s NOTICE: Indicates a potential hazard situation or unsafe practice that, if not avoided, could
result in product or property damage.
Info: Provides application recommendations or other useful information to ensure that you get
the most from your product.
WARNINGS
WARNING: Important! Read and understand these instructions before assembling or using
the Lumex LF2020 Easy Lift STS / LF2090 Bariatric Easy Lift STS. If you do not understand
any part of these warnings, cautions or instructions, contact a healthcare professional for
direction in the use of this product. If the Lumex LF2020 Easy Lift STS / LF2090 Bariatric
Easy Lift STS is not properly assembled, personal injury and damage to the LF2020 /
LF2090 could result.
WARNING: If components are damaged or missing, contact your GF authorized distributor
immediately. DO NOT use substitute parts. Use only Lumex replacement parts. The use of
non-Lumex replacement parts could cause personal injury, property damage, and void the
warranty.
WARNING: Unauthorized modication of your patient lift could cause personal injury,
property damage, and void the warranty.
WARNING: The maximum weight capacity of this device is:
LF2020 Easy Lift STS: 400 lb, EVENLY DISTRIBUTED
LF2090 Bariatric Easy Lift STS: 600 lb, EVENLY DISTRIBUTED
DO NOT exceed the maximum weight capacity.
WARNING: GF Health Products, Inc. assumes no responsibility for any damage or injury
caused by improper assembly or use of this product.
LF2020-INS-LAB-RevG18
5
WARNING: Check all parts for shipping damage before using. In case of damage, DO
NOT USE the equipment. Contact the carrier or your GF authorized distributor for further
instructions.
WARNING: Patient lift may tip over if used incorrectly. Read and adhere to the operating
instructions prior to lifting anyone.
WARNING: GF Health Products, Inc. strongly recommends that two caregivers take part in
the lifting process.
WARNING: When transferring a patient, always keep the patient centered over the base.
WARNING: Ensure that lifting sling loops are correctly attached to the hooks to prevent the
patient from sliding or falling out of the sling, which could result in personal injury. Never
use the patient lift to lift or transfer anything other than a person.
WARNING: Do not put anything (e.g. cushion, pad, etc.) between the user and the sling.
This could cause user to slide out of the sling and result in personal injury.
WARNING: Do not lock the brakes or block the wheels when lifting. The casters must be
FREE to roll to allow the patient lift to stabilize itself when the patient is initially lifted from
a chair, bed, or any stationary object.
WARNING: Do not roll casters over any object while the user is in the sling.
WARNING: Do not attempt to maneuver the lift by pushing on the mast, boom, actuator, or
patient. Always maneuver the lift with the handle.
WARNING: During lifting or lowering, whenever possible, always keep the patient lift legs in
the maximum open position.
WARNING: To facilitate movement, close patient lift legs before moving the lift.
WARNING: Replace any worn or broken parts immediately! Torn, cut, frayed, or broken
slings can fail, resulting in serious personal injury. Use only slings that are in good
condition.
WARNING: Use extreme care, caution, and common sense when utilizing a patient lift.
Special attention must be given to patients who are disoriented and cannot cooperate while
being lifted, such as comatose, agitated, spastic, or mentally confused persons. Consult
their healthcare professional for assistance in lifting these types of patients.
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov.
WARNING: The electronics and actuator contain no serviceable components. If service is
required, the unit must be returned to the factory for repair. DO NOT attempt to open the
electronics or actuator. If service is required, consult GF Tech Support at 1.770.368.4700 for
further information.
WARNING: GF Health Products, Inc. specically disclaims responsibility for any bodily
injury or property damage which may occur during any use which does not comply with
federal, state or local laws or ordinances.
LF2020-INS-LAB-RevG18
6
3 FEATURES
EASY LIFT SIT-TO-STAND FEATURES
Pendant
Actuator
Lifting Boom
Knee Pad
Footrest
Base
Brake
Mast
Control Box
CONTROL BOX FEATURES
RESET Button
Battery Testing
Battery Charger Plug-In
Actuator Plug-In
Pendant Plug-In
LF2020-INS-LAB-RevG18
7
4 HANDLING PROCEDURES
SHIPPING AND TRANSPORTATION INSTRUCTIONS
If the patient lift is to be reshipped by common carrier, it should be packed in the same carton in
which it was received.
Unpacking
WARNING: The lift is heavy. To avoid personal injury, DO NOT attempt to remove the lift
from the box without assistance.
1. Check for any obvious damage to the carton or its contents. If damage is evident, notify the
carrier or your GF authorized distributor.
2. Remove all loose packing from the carton.
3. Carefully remove all the components from the carton.
Info: Unless the patient lift is to be used immediately, retain boxes, containers and packing
material for use in storing until use of patient lift is required.
Inspection
1. Examine the exterior of the patient lift for nicks, dents, scratches or other damage.
2. Inspect all components.
Storage
1. Store the repackaged patient lift in a dry area.
2. DO NOT place other objects on top of the repackaged patient lift.
LF2020-INS-LAB-RevG18
8
5 ASSEMBLY INSTRUCTIONS
WARNING: The lift is heavy. To avoid personal injury, DO NOT attempt to assemble the lift
without assistance.
1. Remove the nuts and bolts from top and bottom of mast.
2. With one hand on the mast and another on the boom, pull the mast to an upright position.
3. Reinstall the bolts in the holes at bottom of mast and hand tighten them.
4. Attach boom to mast and hand tighten bolt and nut.
5. Attach the L-shaped arms to the back of the knee pad.
6. Attach knee pad assembly to the mast.
7. Place the control box in the bracket.
8. Insert the actuator plug into the control box.
9. Insert the pendant plug into the control box.
10. Tighten all nuts.
WARNING: Before using Patient Lift, ensure that lift is assembled as described, that all
attaching hardware is securely tightened, and that all lift components are secure.
Info: Before using the lift, charge the batteries for ten to twelve hours (see instructions on
following page).
LF2020-INS-LAB-RevG18
9
CHARGING THE BATTERIES
Charge the batteries after assembly.
1. Ensure the control box power switch is ON (i.e., the red button is up).
2. Insert the charger plug into the battery box charging socket (the top slot).
3. Insert the other charger plug into the power supply.
4. All LED indicator lights should be ON during charging.
5. When one green LED indicator light illuminates, the batteries require approximately two to
three hours to be fully charged.
6. When only the red LED indicator light illuminates, the batteries require approximately seven to
nine hours to be fully charged.
s NOTICE: Do not charge the batteries for more than twelve hours.
7. Unplug the charger FIRST before using the lift.
Info: The lift will not operate while the batteries are charging.
The lift will not operate while the red reset button is down.
8. Replace the batteries when frequent charging is required.
Important Charging Information
Push lift to an appropriate location and charge the batteries with the charger provided.
s NOTICE: Avoid unplugging the pendant and actuator from the control box. Frequent
plugging and unplugging of the pendant and actuator to and from the control box may
damage the control box.
CHECKING BATTERY CAPACITY
Info: To check remaining battery capacity, press the battery indicator (blue circle with battery
symbol) while the lift is not in motion. Remaining battery capacity is indicated by LED
indicator lights and explained in the following table.
Red Amber Green Green Green Status
ON ON ON ON ON Fully charged
ON ON ON OFF OFF Needs charge
ON ON/OFF OFF OFF OFF Charge immediately—DO NOT use lift
OFF OFF OFF OFF OFF Bad batteries or bad connection
ALARM BUZZERS
The control box has an alarm buzzer that provides information on the status of the batteries and
the lift. To stop the buzzer, push down the RED RESET button or press the battery indicator.
Buzzer type Status Note
2 beeps per second
Low battery (red/amber lights illuminate)
Charge batteries immediately
3 beeps per second Low battery (red light illuminates) Charge batteries immediately
6 beeps per second Very low battery (no lights illuminate) Charge batteries immediately
3 beeps every other second
Bad battery (no lights illuminate) Replace batteries immediately
3 long beeps Overloaded. Batteries are charged but
lift does not lift
Maximum load capacity exceeded
LF2020-INS-LAB-RevG18
10
6 OPERATING INSTRUCTIONS
WARNING: During lifting and lowering, whenever possible, always keep the base legs of
the lift in the widest position.
WARNING: Use only Lumex slings specially designed for the LF2020 Easy Lift STS / LF2090
Bariatric Easy Lift STS.
WARNING: DO NOT use torn, cut, frayed or broken slings as injury could result.
WARNING: Do not put anything (e.g. cushion, pad, etc.) between the user and the sling.
This may cause user to slide out of the sling and could cause injury.
WARNING: GF Health Products, Inc. strongly recommends that two caregivers take part in
the lifting process.
Info: Instructional videos that review the application of several sling styles and lifting
scenarios are available at www.grahameld.com.
Info: While transferring a patient, the patient lift legs can be in either open or closed position.
Preparation before lifting
1. Turn on the power by turning the RED RESET BUTTON clockwise.
2. Press the pendant UP or DOWN button once.
3. After the battery indicator lights de-illuminate, push the pendant UP button and DOWN button
to ensure the lift is operating correctly.
4. Position the lift base around or under the patient.
5. Widen the base.
Fitting Lumex Sit-to-Stand Sling
WARNING: The Lumex Sit-to-Stand sling is not suitable for patients who have involuntary
movements, or patients with limited postural control.
WARNING: Ensure the sling you are using has adequate weight capacity for the person you
are lifting.
1. Position the patient in a sitting position.
2. Slide the sling down patient’s back to lumbar position.
3. Draw the shoulder straps to the front of the patient close to the chest.
4. Draw the waist belt around patient’s waist and press hook and loop sections together to fasten.
5. Place shoulder straps inside the positioning loop.
6. Attach the shoulder straps to the hooks.
LF2020-INS-LAB-RevG18
11
LIFTING THE PATIENT
WARNING: Do not attempt to transfer a patient without prior approval of the patient’s
healthcare professional and without having read the instructions and practiced using the
patient lift.
WARNING: Ensure the oor area is clear of any obstacle that could cause a caster to stop
and possibly tip the patient lift.
Lift and transfer from bed
WARNING: Do not lock or block the patient lift casters when lifting. The casters must be
free to roll so that the patient lift can stabilize as the patient is lifted from the bed.
WARNING: To ensure stability while lifting or lowering a patient, the patient lift legs should
be in the maximum open position.
1. Fit sling as described in “Fitting Lumex Sit-To-Stand Sling”.
2. Push lift towards patient. Open the base of the lift. Apply the brakes on both rear casters.
3. Position patient’s feet on the foot platform and knees against the knee pad.
4. Attach the sling straps to the hooks.
5. Have the patient’s hands holding the handles. For patients who cannot hold the handles, have
them hold their arms around the chest.
6. Press the “UP” button on the hand pendant.
7. Before the patient’s body is lifted from the bed, stop and make sure the sling is secured and
patient’s knees are against the knee pad.
8. The patient should be comfortable with the pressure under the arms. If not, adjust the sling
and try another loop option to release pressure.
9. Press the “UP” button until the patient’s body has completely left the bed.
10. Transfer to another object can be done at this position without the patient attending a full
standing position.
11. Release the brakes, close the base, and pull the lift away from the bed.
12. Lower the patient to the object intended.
13. To lift patient in a standing position, continue to lift until the patient’s knees are locked in a
standing position.
14. At the standing position, patient’s knees may move away from the knee pad.
15. Close the base, and pull the lift away from the bed.
16. Lower the patient to the object intended.
17. Reverse the above procedures when lowering the patient to the bed.
LF2020-INS-LAB-RevG18
12
Lift and transfer from chair
WARNING: GF Health Products, Inc. recommends that two attendants be used when
transferring a patient to and from a wheelchair.
WARNING: Before transfer, ensure wheelchair wheel locks are in locked position.
Wheelchair wheel locks must be in LOCKED POSITION before lowering the patient into the
wheelchair, or unexpected wheelchair movement could result, which may result in serious
injury to both the patient and the attendants.
1. Fit sling as described in “Fitting Lumex Sit-To-Stand Sling”.
2. Push lift towards patient. Open the base of the lift to go around the chair. Apply the brakes on
both rear casters.
3. Position patient’s feet on the foot platform and knees against the knee pad.
4. Attached the sling straps to the hooks.
5. Have the patient’s hands holding the handles. For patients who cannot hold the handles, have
them hold their arms around the chest.
6. Press the “UP” button on the hand control.
7. Before the patient’s body is lifted from the chair, stop and make sure the sling is secured and
patient’s knees are against the knee pad.
8. The patient should be comfortable with the pressure under the arms. If not, adjust the sling
and try another loop option to release pressure.
9. Press the “UP” button until the patient’s body has completely left the chair.
10. Transfer to another object can be done at this position without the patient attending a full
standing position.
11. Release the brakes, close the base, and pull the lift away from the chair.
12. Lower the patient to the object intended.
13. To lift patient in a standing position, continue to lift until the patient’s knees are locked in a
standing position.
14. At the standing position, patient’s knees may move away from the knee pad.
15. Release the brakes, close the base, and pull the lift away from the chair.
16. Lower the patient to the object intended.
17. Reverse the above procedures when lowering the patient to the chair.
LF2020-INS-LAB-RevG18
13
7 CARE AND MAINTENANCE
Proper care and maintenance are essential to keeping your Lumex LF2020 Easy Lift STS / LF2090
Bariatric Easy Lift STS in a safe operating condition. In addition to inspecting the unit before each
use, periodic maintenance checks should be done.
WARNING:
It is extremely important that the patient lift be inspected before each use. Ensure that all
hardware and accessories are secure and that the actuator is functioning properly. Failure to do so could
result in patient / attendant injury or damage to your patient lift. Torn, cut, frayed or broken slings can
fail, resulting in serious injury. Only use slings in good condition. Inspect before each use. Destroy and
discard old worn and unusable slings.
WARNING: Service and repair of the Lumex LF2020 Easy Lift STS / LF2090 Bariatric Easy
Lift STS MUST be performed by qualied personnel ONLY.
WARNING: Unauthorized modication of the patient lift or the use of non-Lumex replacement parts may
change the structure of the lift and could create a hazardous condition, which may result in serious
injury and will void the warranty.
WARNING: The electronics and actuator contain no serviceable components. DO NOT
attempt to open the electronics or actuator. If service is required, consult GF Tech Support
at 1.770.368.4700 for further information.
When you believe a component or part is not functioning properly, immediately contact GF Tech
Support at 1.770.368.4700, as a potentially hazardous condition could exist.
BEFORE EACH USE
Before each use of the patient lift, ensure that:
All nuts and bolts are tight
The lift moves freely (with caster brakes off)
Rear caster brakes operate properly
Base adjustment mechanism operates easily
All necessary items (i.e. slings, wheelchairs, etc.) are accessible and ready for use
Battery capacity is adequate
AT LEAST ONCE A MONTH
The lift should be thoroughly inspected by a person qualied to recognize any signs of wear, and
looseness of bolts or parts. Replace any worn parts immediately.
LUBRICATION
When the lift is serviced, and every month thereafter, place a drop of lubricant (White Lithium
Grease is recommended) on the following points:
The point where mast and boom connect
Caster axles
The point where actuator and boom connect
CLEANING
Regular cleaning is recommended every three months; clean the lift more often as needed. A soft
cloth, dampened with water and a mild NON-ABRASIVE detergent (household cleaner, soapy water, or
hospital grade disinfectant) is all that is needed to clean your patient lift. Automobile wax or furniture
polish will help maintain the nish over a long period of time.
s NOTICE: DO NOT wash patient lift under water pressure or steam clean.
CARE OF SLINGS
Lumex slings are washable at 120°F or less. Air dry.
s NOTICE: DO NOT bleach slings!
LF2020-INS-LAB-RevG18
14
MAINTENANCE SCHEDULE
Info: Only qualied persons should service and repair your Lumex LF2020 Easy Lift STS /
LF2090 Bariatric Easy Lift STS. Regular maintenance of your patient lift is necessary to
ensure continuing proper and safe operation. Read and observe the following recommended
maintenance schedule:
Item Inspect
initially
Inspect / Adjust
daily monthly every 6
months
Base, Casters, and Foot Paddle
Ensure that base is level (all four wheels touch the oor) x x x
Ensure that bolts and nuts are tight x x x
Ensure that casters swivel and roll freely x x x
Apply White Lithium Grease to caster ball bearings x
Check rubber parts of casters for deection x x
Check welding joints for rust and cracks x
Ensure that base opens and closes smoothly x x x x
Ensure that base locks securely in three positions x x x
Ensure that base locking knob is in place and operating properly x x x
Inspect all base hardware for wear x
Mast
Ensure that mast is fully engaged and locked into mast sleeve x x
Inspect mast for bends or deections x
Inspect all mast hardware for wear x x
Boom
Inspect boom for bends or deections x x
Ensure that boom is centered between the base legs x x x
Inspect all boom hardware for wear x
Inspect sling hooks for wear or deections x x
Check connections between boom and mast for improper
connection, looseness, or wear
x x
Slings and Sling Hardware
Check slings and straps for wear and damage; discard if worn x x
Inspect metal/plastic parts for wear or damage x x
Lubrication with White Lithium Grease
Lubricate all pivot points x
Lubricate top and bottom of actuator mounting x
Cleaning
Clean with mild non-abrasive detergent x
Actuator and Electronics
Ensure that batteries are charged x x
Inspect for proper up / down operation x x
Ensure that mounting hardware is tight x x
Inspect mounting hardware for wear x
Ensure that control box is rmly afxed to the mast x x
Ensure that the actuator connecting cable is tight x x
LF2020-INS-LAB-RevG18
15
8 TROUBLESHOOTING
The following list of encountered problems and their solutions will assist you in determining
what may be causing your Lumex lift not to function as designed. If you have a problem occurring
which is not listed below, contact GF Technical Support at 1.770.368.4700 for help. Do not attempt
to repair components or parts on your lift, as this may invalidate your warranty or cause further
problems that may result in patient injury. Stop using your lift immediately if it is not functioning
correctly or any warning beeps are heard.
SYMPTOM POSSIBLE CAUSE ACTION
The actuator is stalled and a
clicking sound is audible
Actuator plug is not seated
properly into control box
Actuator is defective or at end of
its life cycle
Control box is defective
Firmly plug actuator plug into
control box
Replace actuator if control box is
good
Replace control box if bad; replace
control box if pendant is good;
replace pendant if bad
The actuator will either go up or
down, but not both
Hand pendant or control box
defective
Replace control box if pendant is
good
Replace pendant if it is bad
The actuator makes a grinding
sound while lifting, but works ne
without a load
The internal gear is stripped, likely
due to overloading
Stop using the lift immediately!
Repair or replace the actuator
The actuator stops and starts
during lifting or lowering
Bad batteries Check battery indicator; conrm
if lights drop quickly to red light;
replace batteries
The lift will not operate even though
battery indicator shows charge
Battery charger still plugged in
Poor connection between control
box and pendant, or defective
pendant
Poor connection between actuator
and control box
Unplug battery charger
Plug hand pendant rmly into
control box, or replace pendant
Plug actuator cord rmly into
control box
The lift will not operate and battery
indicator has no lights illuminated
Control box may be in OFF position
Internally, batteries may be loose
from their connections
Batteries are in need of being
charged
Batteries are dead and won’t hold a
new charge
Turn the red emergency stop button
until it pops up to the ON position
Check inside control box to ensure
batteries are connected
Use charger to charge batteries,
ensuring the red emergency stop
button is in ON or UP position
Replace the batteries
During charging, the battery
indicator is not illuminated and
won’t charge
The red emergency stop button is
in OFF or DOWN position
The battery charger is defective or
at end of its life cycle
Turn the red emergency stop button
until it pops up to the ON position
Inspect the battery charger for
damage and replace if required
The battery indicator indicates need
for frequent charging and/or lift
loses power
The batteries are at end of life cycle Replace the batteries
The lift will not operate, and there
is no clicking sound or light when
pendant is pressed
The pendant is loose/defective or
at end of its life cycle
Check battery indicator; replace
pendant if battery indicator shows
full charge
WARNING: If you experience a problem with your lift and are unable to solve it yourself,
contact GF Tech Support at 1.770.368.4700 or your GF authorized distributor.
LF2020-INS-LAB-RevG18
16
9 SPECIFICATIONS
Info: All dimensions are given in inches unless otherwise specied.
Base width Open: 43"
Closed: 26"
Base height clearance 6"
Overall base length 50"
Lifting height range
Info: As measured from sling hooks.
Minimum: 27"
Maximum: 71"
Range: 35"
Mast height 50"
Maximum weight capacity LF2020 Easy Lift STS: 400 lb, EVENLY DISTRIBUTED
LF2090 Bariatric Easy Lift STS: 600 lb, EVENLY DISTRIBUTED
Rear locking caster size 4" diameter
Front caster size 4” diameter
Lifting mechanism 24 DC actuator
Battery charger AC 110V / 220V to DC 24V 1 amp
LF2020-INS-LAB-RevG18
17
10 LIMITED WARRANTY
SCOPE OF WARRANTY
GF Health Products, Inc. (“GF”) warrants to the original purchaser only that it will replace or repair
components, at GF’s sole discretion, that are defective in material or workmanship under normal
use and service. All warranties are conditioned upon the proper use of the products strictly in
accordance with good commercial practice and applicable GF instructions and manuals, including
proper use and maintenance. To the extent that a component is warranted by a third party, GF
conveys all of its rights under that warranty to the original purchaser, to the extent permitted.
This limited warranty shall only apply to defects that are reported to GF’s customer service
team within the applicable warranty period and which, upon examination by GF or its authorized
representative, prove to be a warranty item. This limited warranty is not transferable.
The warranted components and time period are set forth below:
Lift frame and spreader bar: ............................................................ 3 years
Actuator: ............................................................................................ 2 years
Parts, including casters, control box, pendant, charger:.............2 years
Batteries: ............................................................................................ 1 year
The applicable warranty period shall commence from date of shipment to the original customer,
unless there is an expiration date on the component in which case the warranty shall expire on the
earlier of warranty period or the expiration date.
OBTAINING WARRANTY SERVICE
This limited warranty shall only apply to defects that are reported to the Distributor from
whom the Customer purchased the product within the applicable warranty period. If there is
not a Distributor, you must contact GF directly by calling 1.770.368.4700, sending a fax request
to 1.770.368.2386, or by e-mailing a request to cs@grahameld.com. Specic directions will be
provided by the Customer Service Representative. Failure to abide by the specic directions will
result in denial of the warranty claim.
The warranty does not cover and GF shall not be liable for the following:
1) Defects, damage, or other conditions caused, in whole or in part, by misuse, abuse, negligence,
alteration, accident, freight damage, tampering or failure to seek and obtain repair or
replacement in a timely manner;
2) Products which are not installed, used, or properly cleaned and maintained as required in the
ofcial manual for the applicable product;
3) Products considered to be of a non-durable nature including, but not limited to: lters, fuses,
gaskets, lubricants, and charts;
4) Accessories or parts not provided by GF;
5) Charges by anyone for adjustments, repairs, replacement parts, installation or other work
performed upon or in connection with such products which are not expressly authorized in
writing, in advance, by GF;
6) Any labor or shipping charges incurred in the replacement part installation or repair;
7) Costs and expenses of regular maintenance and cleaning; and
8) Representations and warranties made by any person or entity other than GF.
LF2020-INS-LAB-RevG18
18
ENTIRE WARRANTY, EXCLUSIVE REMEDY AND CONSEQUENTIAL DAMAGES
DISCLAIMER
THIS WARRANTY IS GF’S ONLY WARRANTY AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS
OR IMPLIED. GF MAKES NO IMPLIED WARRANTIES OF ANY KIND INCLUDING ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IF ANY MODEL
OR SAMPLE WAS SHOWN TO THE CUSTOMER, SUCH MODEL OR SAMPLE WAS USED MERELY TO
ILLUSTRATE THE GENERAL TYPE AND QUALITY OF THE PRODUCT AND NOT TO REPRESENT
THAT THE PRODUCT WOULD NECESSARILY CONFORM TO THE MODEL OR SAMPLE IN ALL
RESPECTS. THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT OF THE DEFECTIVE
PARTS. GF SHALL NOT BE LIABLE FOR AND HEREBY DISCLAIMS ANY DIRECT, SPECIAL, INDIRECT,
INCIDENTAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES, INCLUDING, BUT NOT LIMITED TO:
DAMAGES FOR LOSS OF PROFITS OR INCOME, LOSS OF USE, DOWNTIME, COVER, OR EMPLOYEE
OR INDEPENDENT CONTRACTOR WAGES, PAYMENTS AND BENEFITS.
The warranties contained herein contain all the representations and warranties with respect
to the subject matter of this document, and supersede all prior negotiations, agreements and
understandings with respect thereto. The recipient of this document hereby acknowledges and
represents that it has not relied on any representation, assertion, guarantee, warranty, collateral
contract or other assurance, except those set out in this document.
For additional information on this product or this warranty, please contact a GF Customer Service
Representative.
NOTES:
1) Additional terms and conditions may apply.
2) Freight claims must be notated on the appropriate shipping documents and must be made with
immediacy. International, federal and state regulations govern specic requirements for freight
claims. Failure to abide by those regulations may result in a denial of the freight claim. GF will
assist you in ling the freight claim.
3) Claims for any short shipment must be made within three (3) days of the invoice date.
LF2020-INS-LAB-RevG18
19
11 INDEX
A
Alarm buzzers, signicance 9
Assembly instructions 8
B
Batteries, charging 9
Battery capacity, checking 9
Battery capacity LED indicator lights, signicance 9
Before each use 13
C
Care and maintenance 13
Care of slings 13
CAUTION statement, signicance 4
Cleaning 13
Control box features 6
E
Easy Lift Sit-to-Stand features 6
F
Features 6
H
Handling Procedures 7
I
Info statement, signicance 4
Inspection 7
Intended use 3
Intended use contraindication 3
Introduction 3
L
Lift and transfer from bed 11
Lift and transfer from chair 12
Lifting the patient 11
Lubrication 13
M
Maintenance schedule 14
Maximum weight capacity 4
N
NOTICE statement, signicance 4
O
Operating Instructions 10
P
Preparation before lifting 10
S
Safety precautions 4
Safety statements, signicance of 4
Shipping and transportation instructions 7
Sit-to-Stand Sling, tting 10
Specications 16
Storage 7
T
Troubleshooting 15
U
Unpacking 7
V
Videos, instructional, at www.grahameld.com 10
W
Warnings 4
WARNING statement, signicance 4
Warranty, limited 17
1.770.368.4700
Information contained herein is subject to change.
The most current and complete product information can be found on our website.
www.grahameld.com
© 2005, GF Health Products, Inc. All Rights Reserved.
Graham-Field and Lumex are trademarks of
GF Health Products, Inc., One Graham-Field Way, Atlanta GA 30340-3140
GF Health Products, Inc. is an ISO 13485 Certied Company.
Manufactured for GF Health Products, Inc.
Made in Taiwan
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20

Lumex LF2020 Easy Lift STS User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI