2. Sub-Zero
  3. ID24RO
ID24RO

Sub-Zero ID24RO Reference guide

  • Hello! I am an AI chatbot trained to assist you with the Sub-Zero ID24RO Reference guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
24" DESIGNER OUTDOOR REFRIGERATOR DRAWERS - PANEL READY
ID-24RO
FEATURES
Controls temperature within one degree of setpoint
Assure maximum freshness with low-temp, high-humidity crisper and deli
drawers
Locks in cold air to ensure freshness with magnetic door seals
Control brightness with soft-on LED lighting
Open and close doors silently with soft-close technology
Order accessory panels with or without locks to secure contents
Choice of stainless-steel panels with pro handles match perfectly with
other outdoor Sub-Zero and Wolf products.
ACCESSORIES
Dual Installation Kit
Outdoor Stainless Steel Drawer Panels With Pro Handle
Outdoor Stainless Steel Drawer Panels with Lock
Reduced Toekick Divider
Accessories are available through an authorized dealer.
For local dealer information, visit subzero-wolf.com/locator.
PRODUCT DETAILS
REFRIGERATOR
• Adjustable drawer dividers
• LED lighting
Specifications are subject to change without notice. This information was generated on February 20, 2021. Verify specifications prior to finalizing your cabinetry/enclosures.
24" DESIGNER OUTDOOR REFRIGERATOR DRAWERS - PANEL READY
PRODUCT SPECIFICATIONS
Model ID-24RO
Dimensions 24"W x 34 1/2"H x 24"D
Drawer Clearance 18 3/8"
Weight 185 lbs
Refrigerator Capacity 4 cu. ft.
Electrical Supply 115 VAC, 60 Hz
Electrical Service 15 amp dedicated circuit
Receptacle 3-prong grounding-type, GFCI
ELECTRICAL
PANEL SPECIFICATIONS For complete panels specifications including width/height,
weight requirements and thickness requirements visit subzero-wolf.com/reveal.
NOTE: Dimensions in parenthesis are in millimeters unless otherwise specified
INTERIOR VIEW
This illustration is intended for interior reference only and may not represent the exterior
of the model being specified.
DIMENSIONS
STANDARD INSTALLATION
NOTE:
4
1
/
2
"
(114)
finished returns will be visible and should be finished to match cabinetry
.
24"
(610)
3
4
1
/
2
"
(876)
OPENING
HEIGHT
SIDE VIEW
FRONT VIEW
2
5
3
/
4
"
(654)
OPENING
DEPTH
TOP VIEW
3
/
4
"
(
19)
TYPICAL
FRAMED
CABINETRY
24"
(610)
FILLER
4
1
/
2
"
(114))
FINISHED
RETURN
FRAMELESS
CABINETRY
24"
(610)
3
/
4
"
(
19)
TYPICAL
4
1
/
2
"
(114)
FINISHED
RETURN
Specifications are subject to change without notice. This information was generated on February 20, 2021. Verify specifications prior to finalizing your cabinetry/enclosures.
/