Set Time
There is real time clock displayed in standby using 24 hours mode.
The time can be set through main menu, if the time has never be
set before (When display "--:--" in standby mode), when enter the
"SET TIME" menu, it will display "00:00", else it will display the current time:
Press key, the time will display and the first digit will flash in 2Hz.
Press or key to change the digit to modify, the digit changed
will flash in 2Hz. Input the time as you want. If the input digit is not
correct (for example, the first digit only can be 0, 1 or 2, other digit
is not allowed), the input digit is ignored.
1.
2. The handset can only be registered to one base at a time,and if it is registered to a
second base it loses its registration to the first.