the t.bone Speech 100 B Quick start guide

Brand: the t.bone

Model: Speech 100 B

Type: Quick start guide

The t.bone Speech 100 B is a power supply extension for conference systems of the Speech 100 series. It can supply up to 32 additional microphone stations, allowing you to expand your conference system to accommodate more participants. The Speech 100 B is easy to use, with clear and concise operating elements. It has two inputs and two outputs, allowing you to connect it to the main unit of your conference system and to additional Speech 100 B units. The Speech 100 B is a reliable and durable piece of equipment, making it an excellent choice for any conference system.

Thomann GmbH • Hans-Thomann-Straße 1 • 96138 Burgebrach • www.thomann.de • inf[email protected] DocID: 498125_24.08.2020

Speech 100 B

User manual

This manual contains important information on the safe operation of the device. Read

and follow the safety advice and instructions given. Retain the manual for future refer-

ence. If you pass the device on to others please include this manual.

For the transport and protective packaging, environmentally friendly materials

have been chosen that can be supplied to normal recycling. Ensure that plastic

bags, packaging, etc. are properly disposed of. Do not just dispose of these ma-

terials with your normal household waste, but make sure that they are collected

for recycling. Please follow the notes and markings on the packaging.

This product is subject to the European Waste Electrical and Electronic Equip-

ment Directive (WEEE) in its currently valid version. Do not dispose of your old

device with your normal household waste. Dispose of this product through an

approved waste disposal rm or through your local waste facility. Comply with

the rules and regulations that apply in your country. If in doubt, consult your lo-

cal waste disposal facility.

Safety instructions

Intended use

This device serves as a power supply extension for conference systems of the Speech

100 series. Any other use or use under other operating conditions is considered to be

improper and may result in personal injury or property damage. No liability will be

assumed for damages resulting from improper use.

Danger for children

Ensure that plastic bags, packaging, etc. are disposed of properly and are

not within reach of babies and young children. Choking hazard! Ensure

that children do not detach any small parts (e.g. knobs or the like) from the

unit. They could swallow the pieces and choke! Never let unattended chil-

dren use electrical devices.

Where to use the product

Never use the product

• in direct sunlight

• in conditions of extreme temperature or humidity

• in extremely dusty or dirty areas

• at locations where the unit can become wet

• near magnetic elds

General handling

• To prevent damage, never use force when operating the switches and controls.

• Never immerse the appliance in water. Just wipe it with a clean dry cloth. Do not use

liquid cleaners such as benzene, thinners or ammable cleaning agents.

Keep foreign substances from the unit!

Keep the device away from containers with liquids. Should any liquid get into the unit,

this could lead to its destruction or re. Be sure not to let any metal objects into the unit.

Features

• Power supply extension (booster) for the mic stations 100 C and 100 D of the digital

conference system Speech 100

• One 100 B supplies up to 32 additional mic stations (mode 1):

(1×100 M[main unit]+1×100B[booster]=2×16+2×16=64 [mic stations])

• With a second 100 B, up to 72 mic stations can be supplied (mode 2)

(1×100M+1×100B+1×100B=2×12+2×12+2×12=72)

Operating elements

    

Technical specications

Outputs: 2×36V 1.5A

Supply voltage: 100-240V~50/60Hz

Fuse: 5 mm × 20 mm, 3,15 A, 250 V, slow-blow

Dimensions: 305×45×197mm (W×H×D)

Weight: 2.45kg

Power consumption: 72W

1. OUTPUT w Output 2, for connection to the input of the next

unit involved

2. INPUT w Input 2, for connection to the output of the previous

unit involved

3. OUTPUT q Output 1, for connection to the input of the next

unit involved

4. INPUT q Input 1, for connection to the output of the previous

unit involved

5. IEC chassis plug with fuse holder for connection

to the power supply

Connection diagram

Main unit

Speech 100 B

up to 16 up to 16

the t.bone Speech 100 B Quick start guide

the t.bone Speech 100 B Quick start guide

the t.bone Speech 100 B Quick start guide

Related papers

Other documents