LG DH7530TW Owner's manual

DH7530TW (DH7530TW, S73T1-S/ W, S73T4-C, W3-2, T2)

Please read this manual carefully before operating

your set and retain it for future reference.

OWNER’S MANUAL

DVD Wireless Home Theater

System

ENGLISH

FRANÇAIS

PORTUGUÊS

DH7530WY-MC_DGHALLC_ENG_6027.indd 1 2014-09-30  4:57:50

1 Getting Started

Getting Started2

Getting Started

1

Safety Information

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK DO NOT REMOVE COVER (OR BACK) NO

USER-SERVICEABLE PARTS INSIDE REFER SERVICING

TO QUALIFIED SERVICE PERSONNEL.

This lightning ash with

arrowhead symbol within an

equilateral triangle is intended to

alert the user to the presence of

uninsulated dangerous voltage

within the product’s enclosure that

may be of sucient magnitude to

constitute a risk of electric shock

to persons.

The exclamation point within an

equilateral triangle is intended

to alert the user to the presence

of important operating and

maintenance (servicing)

instructions in the literature

accompanying the product.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK

HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN

OR MOISTURE.

WARNING: Do not install this equipment in a

conned space such as a book case or similar unit.

CAUTION: Do not block any ventilation openings.

Install in accordance with the manufacturer’s

instructions.

Slots and openings in the cabinet are provided for

ventilation and to ensure reliable operation of the

product and to protect it from over heating. The

openings shall be never be blocked by placing

the product on a bed, sofa, rug or other similar

surface. This product shall not be placed in a built-

in installation such as a bookcase or rack unless

proper ventilation is provided or the manufacturer’s

instruction has been adhered to.

CAUTION: This product employs a Laser System.

To ensure proper use of this product, please read

this owner’s manual carefully and retain it for future

reference. Shall the unit require maintenance,

contact an authorized service center.

Use of controls, adjustments or the performance of

procedures other than those specied herein may

result in hazardous radiation exposure.

To prevent direct exposure to laser beam, do not

try to open the enclosure.

CAUTION concerning the Power Cord

Most appliances recommend they be placed upon

a dedicated circuit;

That is, a single outlet circuit which powers only

that appliance and has no additional outlets or

branch circuits. Check the specication page of this

owner’s manual to be certain. Do not overload wall

outlets. Overloaded wall outlets, loose or damaged

wall outlets, extension cords, frayed power cords, or

damaged or cracked wire insulation are dangerous.

Any of these conditions could result in electric

shock or re. Periodically examine the cord of your

appliance, and if its appearance indicates damage

or deterioration, unplug it, discontinue use of the

appliance, and have the cord replaced with an

exact replacement part by an authorized service

center. Protect the power cord from physical or

mechanical abuse, such as being twisted, kinked,

pinched, closed in a door, or walked upon. Pay

particular attention to plugs, wall outlets, and

the point where the cord exits the appliance. The

Power Plug is the disconnecting device. In case of

an emergency, the Power Plug must remain readily

accessible.

DH7530WY-MC_DGHALLC_ENG_6027.indd 2 2014-09-30  4:57:51

Getting Started 3

Getting Started

1

This device is equipped with a portable battery or

accumulator.

Safety way to remove the battery or the

battery from the equipment: Remove the

old battery or battery pack, follow the steps

in reverse order than the assembly. To prevent

contamination of the environment and bring on

possible threat to human and animal health, the

old battery or the battery put it in the appropriate

container at designated collection points. Do

not dispose of batteries or battery together with

other waste. It is recommended that you use

local, free reimbursement systems batteries and

accumulators. The battery shall not be exposed to

excessive heat such as sunshine, re or the like.

CAUTION: The apparatus shall not be exposed to

water (dripping or splashing) and no objects lled

with liquids, such as vases, shall be placed on the

apparatus.

Notes on Copyrights

y

This product incorporates copyright protection

technology that is protected by U.S. patents

and other intellectual property rights. Use of

this copyright protection technology must be

authorized by Rovi, and is intended for home and

other limited viewing uses only unless otherwise

authorized by Rovi. Reverse engineering or

disassembly is prohibited.

y

Under the U.S. Copyright laws and Copyright

laws of other countries, unauthorized recording,

use, display, distribution, or revision of television

programs, videotapes, BD-ROM discs, DVDs, CDs

and other materials may subject you to civil and/

or criminal liability.

DH7530WY-MC_DGHALLC_ENG_6027.indd 3 2014-09-30  4:57:51

Table of Contents4

Table of Contents

1 Getting Started

2 Safety Information

6 Unique Features

6 – Portable In

6 – USB Direct Recording

6 – Full HD up-scaling

6 – Home Theater Speaker ez Setup

6 – Made for iPod

6 – Bluetooth®

6 Accessories

7 Introduction

7 – Playable Discs

7 – About the “7” Symbol Display

7 – Symbols Used in this Manual

7 – Regional Codes

8 Playable ﬁle Requirement

9 Remote control

10 Front panel

11 Rear panel

2 Connecting

12 Assembling the speaker

14 Attaching the speakers to the unit

15 Positioning the system

16 – Wireless speakers connection

17 How to Afﬁx the Ferrite Core

17 – Afﬁx the Ferrite Core for power cord

18 Connections to Your TV

18 – HDMI Out Connection

19 – Video Connection

20 – Resolution Setting

20 Video Output Resolution

21 Optional Equipment Connection

21 – AUX In Connection

21 – AUDIO (PORT. IN) In Connection

21 – Listening to music from your portable

player or external device

22 – USB Connection

23 – OPTICAL In connection

23 – Home theater speaker ez setup

24 Antenna Connection

3 System Setting

25 Adjust the setup settings

25 – OSD Initial language settings -

Optional

25 – To display and exit the Setup menu

26 – Language

26 – Display

27 – Audio

28 – Lock (Parental Control)

29 – Others

4 Operating

30 Using the Home Menu

30 Basic Operations

31 Other Operations

31 – Displaying Disc Information on-screen

32 – To display the DVD Menu

32 – To display the DVD title

32 – 1.5 times speed playback

32 – Screen Saver

32 – Starting play from selected time

32 – Resume playback

32 – Changing subtitle code page

33 – Marked Playback

34 – Viewing a PHOTO ﬁle

35 – Sleep Timer Setting

35 – Dimmer

35 – Turn off the sound temporarily

35 – Last Scene Memory

35 – Power Resume - Optional

35 – System Select - Optional

35 – Adjust the speaker level settings

35 – VOCAL FADER

35 – Auto power down

36 Radio Operations

36 – Listening to the radio

36 – Presetting the Radio Stations

36 – Deleting all the saved stations

36 – Deleting a saved station

36 – Improving poor FM reception

37 Sound adjustment

37 – Setting the surround mode

38 Advanced Operations

38 – Recording to USB

39 Playing the iPod

DH7530WY-MC_DGHALLC_ENG_6027.indd 4 2014-09-30  4:57:51

Table of Contents 5

1

2

3

4

5

6

39 – Preparation

40 – Enjoying iPod on the screen

40 – Enjoying the iPod IN mode

42 Using a Bluetooth wireless technology

42 – Listening to music of a Bluetooth

device

43 – Listening to music on this unit using

Bluetooth device

5 Troubleshooting

45 Troubleshooting

6 Appendix

46 Maintenance

46 – Handling the Unit

46 – Notes on Discs

47 Area Code List

48 Language code List

49 Trademarks and Licenses

50 Speciﬁcations

DH7530WY-MC_DGHALLC_ENG_6027.indd 5 2014-09-30  4:57:51

Getting Started6

Getting Started

1

Unique Features

Portable In

Listen to music from your portable device. (MP3,

Notebook, etc)

USB Direct Recording

Records music from CD to your USB device.

Full HD up-scaling

Views Full HD picture quality with simple setup.

Home Theater Speaker ez

Setup

Listen to sounds from TV, DVD and Digital device

with vivid 5.1 (2.1 or 2.0) ch mode.

Made for iPod

Enjoys music from IPod with simple connection.

Bluetooth®

Listens to music stored on your bluetooth device.

Accessories

Please check and identify the supplied accessories.

Remote control (1) Battery (1)

FM antenna (1) Video cable (1)

Speaker cables (5) HDMI Cable (1)

Wireless TX (1)

DH7530WY-MC_DGHALLC_ENG_6027.indd 6 2014-09-30  4:57:52

Getting Started 7

Getting Started

1

Introduction

Playable Discs

This unit plays DVD±R/RW and CD-R/RW that

contains audio titles, DivX, MP3, WMA and/or

JPEG les. Some DVD±RW/DVD±R or CD-RW/

CD-R cannot be played on this unit due to the

recording quality or physical condition of the disc,

or the characteristics of the recording device and

authoring software.

DVD-VIDEO (8 cm/12 cm disc)

Discs such as movies that can be

purchased or rented.

DVD±R (8 cm/12 cm disc)

Video mode and nalized only.

DVD-RW (8 cm/12 cm disc)

Video mode and nalized only.

DVD+R: Video mode only

Supports the double layer disc also.

DVD+RW (8 cm/12 cm disc)

Video mode and nalized only.

Audio CD: Music CDs or CD-R/CD-

RW in music CD format that can be

purchased.

About the “

7

” Symbol Display

“

7

” may appear on your TV display during

operation and indicates that the function explained

in this owner’s manual is not available on that

specic media.

Symbols Used in this Manual

r

DVD-Video, DVD±R/RW in Video

mode or VR mode and nalized

t

Audio CDs

y

Video les contained in the

USB/Disc

u

Audio les contained in the

USB/Disc

i

Photo les

,

Note

Indicates special notes and operating features.

,

Tip

Indicates tip and hints for making the task easier.

>

Caution

Indicates cautions for preventing possible damages

from abuse.

Regional Codes

This unit has a regional code printed on the rear of

the unit. This unit can play only DVD discs labeled

same as the rear of the unit or “ALL”.

y

Most DVD discs have a globe with one or more

numbers in it clearly visible on the cover. This

number must match your unit’s regional code or

the disc cannot play.

y

If you try to play a DVD with a dierent regional

code from your unit, the message “Check

Regional Code” appears on the TV screen.

DH7530WY-MC_DGHALLC_ENG_6027.indd 7 2014-09-30  4:57:53

Getting Started8

Getting Started

1

Playable ﬁle

Requirement

MP3/ WMA music ﬁle requirement

MP3/ WMA le compatibility with this unit is limited

as follows :

y

Sampling frequency : within 32 to 48 kHz (MP3),

within 32 to 48 kHz (WMA)

y

Bit rate : within 32 to 320 kbps (MP3),

40 to 192 kbps (WMA)

y

Support Version : v2, v7, v8, v9

y

Maximum les : Under 999

y

File extensions : “.mp3”/ “.wma”

y

CD-ROM le format : ISO9660/ JOLIET

y

We recommend that you use Easy-CD Creator,

which creates an ISO9660 le system.

y

You have to set the disc format option to

[Mastered] in order to make the discs compatible

with the LG players when formatting rewritable

discs. When setting the option to Live File

System, you cannot use it on LG players.

(Mastered/ Live File System : Disc format system

for Windows Vista)

Photo ﬁle requirement

Photo le compatibility with this unit is limited as

follows :

y

Max pixel in width : 2760 x 2048 pixel

y

Maximum les : Under 999

y

Some discs may not operate due to a dierent

recording format or the condition of disc.

y

File extensions: “.jpg”

y

CD-ROM le format : ISO9660/ JOLIET

DivX ﬁle requirement

DivX le compatibility with this unit is limited as

follows:

y

Available resolution: within 720 x 576 (W x H)

pixels.

y

The le name of the DivX subtitle should be

entered within 45 characters.

y

If there is impossible code to express in the

DivX le, it may be displayed as “ _ “ mark on the

display.

y

Frame rate : less than 30 fps.

y

If the video and audio structure of recorded

les is not interleaved, either video or audio is

outputted.

y

Playable DivX le : “.avi”, “.mpg”, “.mpeg”, “.divx”

y

Playable Subtitle format : SubRip (*.srt/ *.txt),

SAMI (*.smi), SubStation Alpha (*.ssa/ *.txt),

MicroDVD (*.sub/ *.txt), SubViewer 2.0 (*.sub/

*.txt), Vobsub (*.sub)

y

Playable Codec format :

“DIVX 3.11”, “DIVX4”, “DIVX5”. “DIVX6”

“MP4V3”, “3IVX”

y

Playable Audio format : “AC3”, “PCM”, “MP3”, “WMA”,

y

Sampling frequency : within 32 to 48 kHz (MP3),

within 32 to 48 kHz (WMA)

y

Bit rate : within 32 to 320 kbps (MP3), 40 to 192

kbps (WMA)

y

For Discs formatted in Live le system, you can

not it on this unit.

y

If the name of movie le is dierent from that of

the subtitle le, during playback of a DivX le,

subtitle may not be display.

y

If you play a DivX le dier from DivXspec, it may

not operate normally.

DH7530WY-MC_DGHALLC_ENG_6027.indd 8 2014-09-30  4:57:53

Getting Started 9

Getting Started

1

Battery Installation

Remove the battery cover on the

rear of the Remote Control, and

insert one (size AAA) battery with

4

and

5

matched correctly.

• • • • • •

a

• • • • •

P

RADIO&INPUT: Changes

input sources.

MARKER: Marks play list.

1

POWER: Switches the unit ON

or OFF.

B

OPEN/CLOSE: Opens and

closes the disc Drawer.

SLEEP: Sets the System to turn o

automatically at a specied time.

(Dimmer : The display window will

be darken by half.)

m

INFO/DISPLAY: Accesses On-

Screen Display.

n

HOME: Displays the [Home

Menu].

DISC MENU: Accesses the menu

on a DVD disc.

• • • • • •

b

• • • • •

W/S/A/D

(up/ down/ left/

right): Used to navigate on-screen

displays.

PRESET +/-: Selects programme

of Radio.

TUNING +/-: Tunes in the desired

radio station.

b

ENTER: Acknowledges menu

selection.

Presetting the radio stations.

x

RETURN: Moves backwards

in the menu or exits the setup

menu.

TITLE: If the current DVD title has

a menu, the title menu appears

on the screen. Otherwise, the disc

menu may not appear.

• • • • • •

c

• • • • •

Z

STOP: Stops playback.

d

PLAY, MONO/STEREO: Starts

playback. Selects Mono/ Stereo.

M

PAUSE/STEP: Pauses playback.

C/V

SKIP: Goes to the next

or previous chapter / track / le.

c/v

SCAN: Searches

backward or forward.

• • • • • •

d

• • • • •

SPEAKER LEVEL: Sets the sound

level of desired speaker.

SOUND EFFECT: Selects a sound

eect mode.

VOL -/+ (Volume): Adjusts

speaker volume.

OPTICAL: Changes input source

to optical directly.

MUTE: Mutes the sound.

• • • • • •

e

• • • • •

0-9 numerical buttons: Selects

numbered options in a menu.

h

REPEAT: Selects a play

mode. (Repeat/ Random)

CLEAR: Removes a number when

setting the password.

• • • • • •

f

• • • • •

TV Control buttons: Controls the

TV. (LG TV only)

-

You can control the sound

level, input source, and power

switching of LG TVs as well.

Hold POWER (TV) and press PR/

CH (

W/S

) button repeatedly

until the TV turns on or o.

X

REC: USB Direct Recording.

BLUETOOTH: Pairing, Connecting

and disconnecting your unit and

Bluetooth device in function other

than the Bluetooth.

MIC VOL -/+ : Adjusts microphone

volume.

ECHO VOL -/+ : Adjusts echo

volume.

VOCAL FADER : You can enjoy

the function as karaoke, by

reducing singer vocal of music in

the various source.

Remote control

DH7530WY-MC_DGHALLC_ENG_6027.indd 9 2014-09-30  4:57:53

Getting Started10

Getting Started

1

Front panel

1

2

3 4

5

6

7

8

9

10

a

DVD/CD Disc Drawer

b

R

(OPEN/CLOSE)

Opens or closes the disc tray.

c

T

(PLAY/PAUSE)

Starts playback.

Pauses playback temporarily, press again to exit

pause mode.

d

I

(STOP)

Stops playback.

e

F (FUNCTION)

Changes the input source or function.

f

VOL(-/ +)

Adjusts speaker volume.

g

1/!

(POWER)

Switches the unit ON or OFF.

h

Display window

i

USB Port

Connects a USB device.

j

PORT. IN

Connects to a portable player with audio

outputs.

k

Microphone jacks 1/2

Precautions in using the touch buttons

y

Use the touch buttons with clean and dry

hands.

- In a humid environment, wipe out any

moisture on the touch buttons before

using.

y

Do not press the touch buttons hard to

make it work.

- If you apply too much strength, it can

damage the sensor of the touch buttons.

y

Touch the button that you want to work in

order to operate the function correctly.

y

Be careful not to have any conductive

material such as metallic object on the

touch buttons. It can cause malfunctions.

>

Caution

DH7530WY-MC_DGHALLC_ENG_6027.indd 10 2014-09-30  4:57:54

Getting Started 11

Getting Started

1

a

Power cord

b

Speaker connectors

Connects the speaker cables.

c

Cooling Fan

d

Antenna Connector

FM- Connects the FM wired antenna

e

iPod (24 pin)

f

WIRELESS

g

AUX (L/R) INPUT

Connects to an external source with 2 channel

audio outputs.

h

VIDEO OUT

Connects to a TV with video inputs.

i

HDMI OUT

Connects to TV with HDMI inputs.

(Interface for digital audio and video)

j

OPTICAL IN

Connects to optical audio equipment.

Rear panel

3

4

5

6

7

8

9

1

2

10

DH7530WY-MC_DGHALLC_ENG_6027.indd 11 2014-09-30  4:57:54

2 Connecting

Connecting12

Connecting

2

Assembling the

speaker

Before connecting the speakers, assemble the

speakers. Please check the items for assembling the

speakers.

Preparation

1. Attach the pole to the base, then secure the

connection with a supplied screw.

2. Draw the speaker cord through the hole on the

base.

Make sure speaker cable unfolded or in

straight condition before insert it to the hole.

,

Note

Speaker

Pole

Base

Screw

Cable

DH7530WY-MC_DGHALLC_ENG_6027.indd 12 2014-09-30  4:57:55

Connecting 13

Connecting

2

3. Attach the speakers to the speaker stands by

rotating the screws.

Do not catch the speaker cord between the

speakers and the pole.

,

Note

4. Connect the speaker wire to the terminal on the

speaker.

Make sure the wire marked black goes in to the

terminal marked “–” (minus) and the other wire

goes in to the terminal marked

“+” (plus).

Be careful that the speaker

does not fall down.

Otherwise it may result in

the speaker malfunctioning

and causing personal injury

and/ or property damage.

>

Caution

DH7530WY-MC_DGHALLC_ENG_6027.indd 13 2014-09-30  4:57:55

14

Connecting

2

Connecting

Attaching the speakers

to the unit

1. Connect the wires to the unit.

Match each wire’s colored band to the same

colored connection terminal on the rear of the

unit. To connect the cable to the unit, press

each plastic nger pad to open the connection

terminal. Insert the wire and release the nger

pad.

Connect the black stripe of each wire to the

terminals marked -(minus) and the other end

to the terminals marked + (plus).

Connect a woofer cord to the player. When

connecting a woofer cord to the player, insert

the connector until it clicks.

2. Connect the wires to the speakers.

Connect the other end of each wire to the

correct speaker according to the color coding:

Color Speaker Position

Green Center Center

Orange Sub woofer Any front position

Red Front Front right

White Front Front left

To connect the cable to the speakers, press each

plastic nger pad to open the connection terminals

on the base of each speaker. Insert the wire and

release the nger pad.

y

Be careful to make sure children do not put

their hands or any objects into the *speaker

duct.

*Speaker duct : A hole for plentiful bass

sound on speaker cabinet (enclosure).

y

The speakers contain magnet parts, so color

irregularity may occur on the TV screen or

PC monitor screen. Please use the speakers

far away from either TV screen or PC

monitor.

>

Caution

DH7530WY-MC_DGHALLC_ENG_6027.indd 14 2014-09-30  4:57:56

Connecting 15

Connecting

2

Positioning the system

The following illustration shows an example of

positioning the system. Note that the illustrations

in these instructions dier from the actual unit for

explanation purposes.

For the best possible surround sound, all the

speakers other than the subwoofer should be

placed at the same distance from the listening

position ( ).

A

B

D

E

F

A

G

C

A

B

A

Front left speaker (L)/ Front right speaker (R):

Place the front speakers to the sides of the

monitor or screen and as ush with the screen

surface as possible.

Center speaker: Place the center speaker above

or below the monitor or screen.

Surround left speaker (L)/ Surround right

speaker (R):

Place these speakers behind your listening

position, facing slightly inwards.

Subwoofer: The position of the subwoofer is

not so critical, because low bass sounds are not

highly directional. But it is better to place the

subwoofer near the front speakers. Turn it slightly

toward the center of the room to reduce the wall

reections.

Unit

DH7530WY-MC_DGHALLC_ENG_6027.indd 15 2014-09-30  4:57:57

Connecting16

Connecting

2

Wireless speakers connection

LED indicator of wireless receiver

LED Color Operation

Yellow The wireless receiver is receiving

the signal of the wireless TX.

Red The Wireless Receiver is in

standby mode.

O (No

display)

The power cord of wireless

receiver is disconnected.

Setting up the wireless receiver for

the ﬁrst time

1. Connect the Wireless Receiver and the rear

speaker (right, left) with the speaker cables.

Color Speaker Position

Grey Rear Rear right

Blue Rear Rear left

2. Connect the power cord of the Wireless

Receiver to the outlet.

3. Turn o the unit and insert the Wireless TX into

the WIRELESS connector on the rear of the unit.

Line

4. Turn on the main unit: The main unit and

wireless receiver will be automatically

connected.

y

Insert the Wireless TX with the marked

“Wireless TX" facing upwards to rear on the

unit.

y

Insert the Wireless TX to the line on the

Wireless TX into the WIRELESS connector

on the rear of the unit.

y

Do not insert a wireless dongle other than

the Wireless TX dongle dedicated for the

product. The product might be damaged

or it may not be removed easily.

>

Caution

Manually pairing wireless receiver

When your connection is not completed, you can

see the red LED on the wireless receiver and rear

speakers are not made sound. To solve the problem,

follow the below steps.

1. Press and hold

I

STOP button on the unit

and MUTE button on the remote control

simultaneously.

- Displays the “REMATE”.

2. Press PAIRING on back of the wireless receiver.

- The Yellow LED will icker

3. Turn o and on the unit.

- If you see Yellow LED, it’ s successful.

4. If you don’t see Yellow LED, try again Step 1 - Step 3.

DH7530WY-MC_DGHALLC_ENG_6027.indd 16 2014-09-30  4:57:58

Connecting 17

Connecting

2

How to Afﬁx the

Ferrite Core

Ferrite core may not be provided depending on

each nation’s regulations.

Afﬁx the Ferrite Core for

power cord

You must ax a ferrite core in order to reduce or

eliminate electrical interference.

1. Pull the stopper [a] of the ferrite core to open.

2. Wind the power cord around the ferrite core

twice.

3. Close the ferrite core until it clicks.

y

If there is a strong electromagnetic wave

product nearby, interference may occur.

Put the unit (Wireless Receiver and main

unit) away from there.

y

If there is no audio signal for longer than

10 minutes, the Wireless Receiver will

automatically switch to standby mode. In

power saving mode, both LEDs will turn

red. LEDs will turn blue or yellow when

there is any audio signal back.

y

If you operate main unit then wireless

speakers (rear speakers) sound within a few

seconds in standby mode.

y

Set the distance between this unit and

Wireless Receiver within 10 m (32 ft.).

y

Optimum performance can be

implemented only when the Wireless TX

and the Wireless Receiver within distance

of 2 m (6 ft.) to 10 m (32 ft.) is used since

communication failure may occur if longer

distance is used.

y

Be sure to match the speaker cable to the

appropriate terminal on the components:

+ to + and – to –. If the cables are reversed,

the sound will be distorted and will lack

bass.

y

It takes a few seconds (and may take

longer) for the Wireless TX and Wireless

Receiver to communicate with each other.

y

Use the rear speaker at least 30 cm (11 inch)

away from either TV screen or PC monitor.

,

Note

DH7530WY-MC_DGHALLC_ENG_6027.indd 17 2014-09-30  4:57:58

Connecting18

Connecting

2

Connections to Your

TV

Make one of the following connections, depending

on the capabilities of your existing equipment.

y

Depending on your TV and other

equipment you wish to connect, there are

various ways you could connect the player.

Use only one of the connections described

in this manual.

y

Please refer to the manuals of your TV,

Stereo System or other devices as necessary

to make the best connections.

,

Note

y

Make sure the unit is connected directly

to the TV. Tune the TV to the correct video

input channel.

y

Do not connect your player via your VCR.

The image could be distorted by the copy

protection system.

>

Caution

HDMI Out Connection

If you have a HDMI TV or monitor, you can connect

it to this unit using a HDMI cable (Type A, High

Speed HDMI™ Cable).

Connect the HDMI OUT jack on the unit to the

HDMI IN jack on a HDMI compatible TV or monitor.

Set the TV’s source to HDMI (refer to TV’s Owner’s

manual).

Unit

TV

y

You can fully enjoy digital audio and video

signals together with this HDMI connection.

y

When you use HDMI connection, you can

change the resolution for the HDMI output.

(Refer to “Resolution Setting” on page 20.)

,

Tip

DH7530WY-MC_DGHALLC_ENG_6027.indd 18 2014-09-30  4:57:59

Connecting 19

Connecting

2

y

If a connected HDMI device does not accept

the audio output of the unit, the HDMI

device’s audio sound may be distorted or

may not output.

y

When you connect a HDMI or DVI

compatible device make sure of the

following:

- Try switching o the HDMI/DVI device

and this unit. Next, switch on the HDMI/

DVI device and leave it for around 30

seconds, then switch on this unit.

- The connected device’s video input is set

correctly for this unit.

- The connected device is compatible with

720 x 480i (or 576i), 720 x 480p (or 576p),

1280 x 720p, 1920 x 1080i or 1920 x 1080p

video input.

y

Not all HDCP-compatible HDMI or DVI

devices will work with this unit.

- The picture will not be displayed properly

with non-HDCP device.

- This unit does not playback and TV screen

is changed to black or green screen or the

snow noise may occur on the screen.

y

If there is noise or lines on the screen, please

check the HDMI cable and use a higher

version cable than High Speed HDMI™

Cable.

,

Note

y

Changing the resolution when the

connection has already been established

may result in malfunctions. To solve the

problem, turn o the unit and then turn it

on again.

y

When the HDMI connection with HDCP is

not veried, TV screen is changed to black

or green screen or the snow noise may

occur on the screen. In this case, check the

the HDMI connection, or disconnect the

HDMI cable.

>

Caution

Video Connection

Connect the VIDEO OUT jack on the unit to the

video in jack on the TV using a video cable.

You can hear the sound through the system’s

speakers.

Unit

TV

Yellow

DH7530WY-MC_DGHALLC_ENG_6027.indd 19 2014-09-30  4:57:59

Connecting20

Connecting

2

Resolution Setting

The unit provides several output resolutions for

HDMI OUT.

You can change the resolution using [Setup] menu.

1. Press

n

HOME.

2. Use

A/D

to select the [Setup] and press

b

ENTER. The [Setup] menu appears.

3. Use

W/S

to select [Display] option then press

D

to move to the second level.

4. Use

W/S

to select the [Resolution] option

then press

D

to move to the third level.

5. Use

W/S

to select the desired resolution then

press

b

ENTER to conrm your selection.

If your TV does not accept the resolution you

have set on the player, you can set resolution

to 480p (or 576p) as follows:

Press

Z

STOP for more than 5 seconds.

,

Note

Video Output

Resolution

Displayed resolution in display window and

outputted resolution may dierent according to

connection type.

[HDMI OUT] : 1080p, 1080i, 720p and 480p (or

576p) and 480i (or 576i)

[VIDEO OUT] : 480i (or 576i)

DH7530WY-MC_DGHALLC_ENG_6027.indd 20 2014-09-30  4:57:59

Page is loading ...

LG DH7530TW Owner's manual

LG DH7530TW Owner's manual

Related papers

Other documents