LG WTP20Y User manual

DWG.

No.

TRIG.

DR COMPLETED

도면 DR 완료

완료일 : 16.09.19

LG 전자 (주)

LG Electronics Inc.

UNIT SCALE

1

mm

REVIEWEDDESIGNED

RELATED DWG.

CHECKED APPROVED

장현연

17.08.04 17.08.04 17.08.04

이갑선 김현석

MODELING

I

T

L

E

T

APPROVED

승인자

PREPARED

시방자

DATE

년/월/일

REF. NO.

시방 번호

REV. NO.

기호

REVISION DESCRIPTION

변경 사항

김동윤홍순창2017/08/25EAGH800161 인쇄내용 변경

1

2

3

4

RELEASING THIS DRAWING

WITHOUT PERMISSION LG

Electronics SHOULD BE

ACCUSED ACCORDING TO THE

LAWS AND COMPANY RULES.

이 도면은 LG전자의 자산으로 불법

유출시 관계법과 회사규정에 의해 처벌됨.

PDF

ILLUSTRATOR

1 5 4 1 5 4

2 16

MFL70280504

MANUAL,OWNER’S

W-module(W) 1/1

MFL70280504

<< 주기 >>

1. 재질 : 모조지 80g

2. 인쇄 작업

3. 문자의 크기 및 형상은 주어진 FILM에 준한다.

4. 책자의 크기는 일반적 규격(국판)에 준한다.

6. 유해물질 관리 기준

:본 부품에 금지물질이 포함되지 않도록 하고, 상세내용은 LG(63)-A-5501-34를

만족할 것.

<< NOTES >>

1. Material : Vellum paper

2. Print work

1) G/S(LG) BRAND(FIG1) : * Cover - First color : LG Red Pantone #207

- Second color : LG GRAY PANTONE #430

* Inside - First color : Black

3. Printing, text size and line are based on LG designg film.

4. Size will Follow the standard.

5. Before product controlled by criteria sample.

6. Standard of supervision for hazardous material

: The part should not contain prohibited substances(Pb,Cd,Hg,Cr+6,PBB,PBDE)

and details should comply with LG standard of LG(63)-A-5501-34.

가

P/NO. 다

나

WORK

가

BRAND

04

나

MODEL

다

P/NO.

MATERIAL AND PRINTING DESCRIPTION

PRINTING DEGREE

EXTERIER INTERIER

LG MODEL 명

SUFFIX

LANGUAGE

PAGE

REMARK

SEC.

1) G/S(LG) BRAND(FIG1): * 표지 - 1도 : LG RED PANTONE #207

- 2도 : LG GRAY PANTONE #430

* 내지 -1도 : BLACK

2) OEM BRAND(FIG2) : * 표지 - 1도 : BLACK

* 내지 - 1도 : BLACK

5. 양산 전에 설계 한도를 득할것.

2) OEM BRAND(FIG2) : * Cover - First color : Black

* Inside - First color : Black

LG

MFL70280504

1 1

EN

44

모조지 80g OFFSET 인쇄

W-module (W)

WTP20WY

ABWREAPF8K5XNK3

www.lg.com

OWNER'S MANUAL

WASHING

MACHINE

Before beginning installation, read these instructions carefully.

This will simplify installation and ensure that the product is

installed correctly and safely. Leave these instructions near the

product after installation for future reference.

WTP20WY

MFL70280504

Rev.00_080117

TABLE OF CONTENTS

This manual may contain images or

content different from the model you

purchased.

This manual is subject to revision by the

manufacturer.

SAFETY INSTRUCTIONS ........................................................ 4

IMPORTANT SAFETY INSTRUCTIONS ....................................................4

INSTALLATION ....................................................................... 10

Parts .........................................................................................................10

Accessories .............................................................................................. 11

Specifications ........................................................................................... 11

Installation Place Requirements ...............................................................12

Stacking Mini Washer ...............................................................................13

Connecting the Supply Hose ....................................................................15

Installing the Drain Hose ..........................................................................17

Leveling the Appliance ..............................................................................18

OPERATION ........................................................................... 19

Using the Appliance .................................................................................. 19

Sorting Laundry ........................................................................................20

Closing the Door and Drawer ...................................................................21

Adding Cleaning Products ........................................................................22

Control Panel ............................................................................................ 24

Programme Table .....................................................................................25

Option Programme ...................................................................................26

SMART FUNCTIONS .............................................................. 27

Using SmartThinQ Application ..................................................................27

Using Smart Diagnosis™ .........................................................................29

MAINTENANCE ...................................................................... 30

Cleaning the Washing Machine ................................................................30

Cleaning the Drum .................................................................................... 31

Cleaning the Water Inlet Filter ..................................................................31

Cleaning the Lint Filter .............................................................................. 32

Caution on Freezing During Winter ..........................................................32

TROUBLESHOOTING ............................................................ 34

Diagnosing Problems ...............................................................................34

Error Messages ........................................................................................38

4

SAFETY INSTRUCTIONS

EN

The following safety guidelines are intended to prevent

unforeseen risks or damage from unsafe or incorrect

operation of the appliance.

The guidelines are separated into ‘WARNING’ and ‘CAUTION’

as described below.

This symbol is displayed to indicate matters and

operations that can cause risk. Read the part with this

symbol carefully and follow the instructions in order to

avoid risk.

WARNING

This indicates that the failure to follow the instructions can

cause serious injury or death.

CAUTION

This indicates that the failure to follow the instructions can

cause the minor injury or damage to the product.

IMPORTANT SAFETY INSTRUCTIONS

WARNING

To reduce the risk of explosion, fire, death, electric shock,

injury or scalding to persons when using this product,

follow basic precautions, including the following:

Children in the Household

This appliance is not intended for use by persons (including

children) with reduced physical, sensory or mental capabilities, or

lack of experience and knowledge, unless they have been given

supervision or instruction concerning use of the appliance by a

person responsible for their safety. Children should be supervised

to ensure that they do not play with the appliance.

5

EN

Installation

•Never attempt to operate the appliance if it is damaged,

malfunctioning, partially disassembled, or has missing or broken

parts, including a damaged cord or plug.

•This appliance should only be installed and transported by two or

more people holding the appliance securely.

•Do not install the appliance in a damp and dusty place. Do not

install or store the appliance in any outdoor area, or any area that

is subject to weathering conditions such as direct sunlight, wind,

or rain or temperatures below freezing.

•Tighten the drain hose at connecting ends to avoid separation.

6

EN

•If the power cord is damaged or the hole of the outlet socket is

loose, do not use the power cord and contact an authorized

service centre.

•This appliance must not be installed behind a lockable door, a

sliding door or a door with a hinge on the opposite side to that of

the appliance, in such a way that a full opening of the appliance

door is restricted.

•This appliance must be grounded (earthed via the power cord). In

the event of malfunction or breakdown, grounding will reduce the

risk of electric shock by providing a path of least resistance for

electric current.

•This appliance is equipped with a power cord having an

equipment-grounding conductor (earthing pin) and a grounding

power plug. The power plug must be plugged into an appropriate

socket outlet that is installed and grounded in accordance with all

local codes and ordinances.

•Improper connection of the equipment-grounding conductor can

result in risk of electric shock. Check with a qualified electrician or

service personnel if you are in doubt as to whether the appliance

is properly grounded.

•Do not modify the power plug provided with the appliance. If it

does not fit the outlet, have a proper outlet installed by a qualified

electrician.

7

EN

Operation

•Do not use a sharp object like drill or pin to penetrate, modify or

disassemble the unit.

•Do not repair or replace any part of the appliance. All repairs and

servicing must be performed by qualified service personnel unless

specifically recommended in this Owner’s Manual. Use only

authorized factory parts.

•Use a new hose or hose-set supplied with the appliance. Reusing

old hoses can cause a water leak and subsequent property

damage.

•Do not reach into the appliance if the tub or agitator is moving.

•Keep the area underneath and around the appliance free of

combustible materials such as lint, paper, rags, chemicals, etc.

•Do not put animals, such as pets into the appliance.

•Do not leave the appliance door open. Children may hang on the

door or crawl inside the appliance, causing damage or injury.

•Never reach into the appliance while it is operating. Wait until the

drum has completely stopped.

•Do not put in, wash or dry articles that have been cleaned in,

washed in, soaked in, or spotted with combustible or explosive

substances (such as wax, oil, paint, gasoline, degreasers,

drycleaning solvents, kerosene, vegetable oil, cooking oil, etc.).

Improper use can cause a fire or explosion.

•In case of flood, disconnect the power plug and contact the LG

Electronics customer information centre.

•Do not push down the drawer excessively, when the appliance

drawer is open.

8

EN

•Do not use flammable gas and combustible substances (benzene,

gasoline, thinner, petroleum, alcohol, etc.) near the appliance.

•If the drain hose or inlet hose is frozen during winter, use it only

after thawing.

•Keep all washing detergents, softener and bleach away from

children.

•Do not touch the power plug or the appliance controls with wet

hands.

•When pulling out the power plug from an outlet, hold the power

plug, not the cable.

•Do not bend the power cable excessively or place a heavy object

on it.

•If there is a gas leakage (isobutane, propane, natural gas, etc.),

do not touch the appliance or power plug and ventilate the area

immediately.

•Do not instal the Mini Washer on top of another Mini Washer or

Pedestal or elevated surface or stand.

•To avoid breaking the door glass, do not push too hard on the

door when closing.

•Do not step on Mini Washer.

•Do not wash rugs, mats, shoes or pet blankets, or any other items

other than clothes or small sheets, in this machine.

•This appliance must only be used for domestic household

purposes and should not be used in mobile applications.

•Do not open or close the door by foot.

9

EN

Maintenance

•Securely plug the power plug in the socket outlet after completely

removing any moisture and dust.

•Disconnect the power cord before cleaning the appliance.

•Never unplug the appliance by pulling on the power cable. Always

grip the power plug firmly and pull straight out from the socket

outlet.

•Do not spray water inside or outside the appliance to clean it.

Disposal

•Before discarding an old appliance, unplug it. Cut off the cable

directly behind the appliance to prevent misuse.

•Dispose of all packaging materials (such as plastic bags and

styrofoam) away from children. The packaging materials can

cause suffocation.

•Remove the door before disposing of or discarding this appliance

to avoid the danger of children or small animals getting trapped

inside.

10

INSTALLATION

EN

Parts

7

8

6

5

4

3

2

1

Door

Drum

Control Panel

Drawer

1

2

3

4

Water Supply Hose

Power Plug

Water Drain Hose

Leveling Feet

5

6

7

8

11

EN

Accessories

Water supply hose

(for cold water)

Connecting

supply hose

Water drain hose Water supply hose

connector

Water drain hose

connector

Anti-slip sheets

(2 EA)

Detergent

measuring

cup

Brackets (front)

(2 EA)

Brackets (back)

(2 EA)

Spanner

* Screws

Type A (37 EA)

Type B (5 EA)

Type C (11 EA)

Cable ties

(2 EA)

Band clamps

(3 EA)

Remote control

(some models only)

* Type A : long sheet metal screw, Type B : short sheet metal screw, Type C : machine screw

NOTE

• Different accessories may apply to each model.

• Depending on the installation environment, you may have to purchase a separate drain hose

connector. The connector supplied will suit a standard laundry drum side drain hole.

• In addition to the screws required for installation, some extra screws have been provided.

Specifications

Power supply 220 - 240 V~, 50 Hz

Size 600 mm (W) X 700 mm (D) X 365 mm(H)

Product weight 43 kg

Permissible water pressure 0.1 - 0.8 Mpa (1.0 - 8.0 kgf / cm²)

Wash capacity 2 kg

• Appearance and specifications may change without notice to improve the quality of the product.

12

EN

Installation Place

Requirements

Location

125 cm

5 cm5 cm

60 cm

10 cm

114 cm

135 cm

123 cm

2 cm

*125 cm

0.5 cm

*125 cm: minimum space for installation

Level floor : Allowable slope under the entire

appliance is 1°.

Power outlet : Must be within 1.5 meters of

either side of the location of the appliance.

• Do not overload the outlet with more than one

appliance.

Additional Clearance : 5 cm at the sides and 10

cm behind the unit.

• Do not place or store laundry products on top

of the appliance at any time. These products

may damage the finish or controls.

WARNING

• The plug must be plugged into an appropriate

outlet that is properly installed and grounded in

accordance with all local codes and ordinances.

Positioning

• Install the appliance on a flat hard floor. Then,

level the Mini Washer before placing the Main

washer on top. Lock only the rear feet of the

Mini washer after leveling as the two front feet

may need readjusting after the Main Washer

has been placed on top.

• Make sure that air circulation around the

appliance is not impeded by carpets, rugs, etc.

• Never try to correct any unevenness in the floor

with pieces of wood, cardboard or similar

materials under the appliance.

• If it is impossible to avoid positioning the

appliance next to a gas cooker or coal burning

stove, an insulation (85x60 cm) covered with

aluminum foil on the side facing the cooker or

stove must be inserted between the two

appliances.

• Do not install the appliance in rooms where

freezing temperatures may occur. Frozen

hoses may burst under pressure. The

reliability of the electronic control unit may be

impaired at temperatures below freezing point.

• Ensure that when the appliance is installed, it

is easily accessible for an engineer in the

event of a breakdown.

• With the appliance installed, adjust all four

feet using a transit bolt spanner to ensure the

appliance is stable, and a clearance of

approximately 5 mm is left between the top of

the appliance and the underside of any

work-top.

• If the appliance is delivered in winter and

temperatures are below freezing, place the

appliance at room temperature for a few hours

before putting it into operation.

• Do not use a drip pan as it can block the

drawer. Using the drip pan may result in

increased vibration and noise during

operation.

WARNING

• This appliance is not designed for maritime

use or for use in mobile installations such as

caravans, aircraft etc.

Electrical Connection

• Do not use an extension cord or double

adapter.

• Always unplug the appliance and turn off the

water supply after use.

• Connect the appliance to an earthed socket in

accordance with current wiring regulations.

• The appliance must be positioned so that the

plug is easily accessible.

• Repairs to the appliance must only be carried

out by qualified personnel. Repairs carried out

by inexperienced persons may cause injury or

serious malfunctioning. Contact an authorised

LG repairer.

13

EN

Stacking Mini Washer

Brackets (front)

Brackets (back)

Brackets (front) Brackets (back)

• The

error message appears on the

display, if the stacking holder is not attached

to the bottom of the Main Washer.

1

Tilt and hold Main Washer.

2

Assemble the front brackets and stacking

holder at the bottom of Main Washer.

NOTE

• The stacking holder and screws needed for

assembly are enclosed in the Main

Washer, which must be stacked with this

Mini Washer.

Type 1. Where the bottom part of the

Main Washer is silver in color.

• First assemble the stacking holder using 2

type A screws included in the accessory

box of the Mini Washer, then each bracket

using 7 type A screws included in the

accessory box of the Mini Washer.

2

3

1

Type 2. Where the bottom part of the

Main Washer is white in color.

• First assemble the stacking holder using 2

type C screws included in the accessory

box of the Main Washer, then each

bracket using 4 type C screws included in

the accessory box of the Mini Washer.

2

1

14

EN

3

Pull and save the foam block for future use.

• If the washing machine must be moved in

the future, the foam block will help prevent

damage to the washing machine during

transportation.

NOTE

• To prevent damage, do not remove the

foam block until Mini Washer is at the final

location.

4

Rotate the top cover 180 degrees.

Cover the upper hole with the top cover and

install 4 type B screws to fix it in place.

5

Attach the two back brackets on the rear

top of the Mini Washer by inserting 4 type A

screws in each bracket.

6

Carefully place the Main Washer on top of

Mini Washer.

• Make sure the 4 legs are totally wound in

and the holes of Mini Washer align with

the holes of Main Washer.

Washer leg

7

Securely attach the two appliances at the

corners using 14 type A screws.

• First, insert screws on each side. Then

insert screws on the front and back side.

NOTE

• It can be difficult to assemble if it is not

assembled in the proper order.

• Use two type C screws to assemble the

stacking holder.

1

2

3

Stacking holder

8

Turn the feet of the Main Washer slightly

until they are firmly snug up against the

Mini Washer.

NOTE

• Mini Washer will not work as a standalone

unit.

15

EN

Connecting the Supply Hose

• Water supply pressure must be between 0.1

MPa and 0.8 MPa (100 ~ 800kPa).

• Do not overtighten the water supply hose.

• If the water supply pressure is more than 0.8

MPa, a decompression device should be

installed.

• Periodically check the condition of the hose

even after installation and replace the hose if

necessary.

• Contact the service centre if there is no rubber

seal fitted to the hose ends.

Checking the Rubber Seal on the

Supply Hose

Two rubber seals are supplied with the water

supply hoses. They are used for preventing

water leaks. Make sure the connection to taps

is sufficiently tight. Do not use mechanical

devices such as multi grips to tighten the inlet

hoses.

Hose connector

Rubber seal

Hose connector

Rubber seal

Connecting Hose to Water Tap

Connecting Screw-Type Hose to Tap

with Thread

Screw an inlet hose of the Main washer to the

COLD water supply tap.

16

EN

Connecting the Cold Supply

Hoses to Both Washing Machines

1

Connect one end of the cold water supply

hose connector to the cold water supply

hose of the Main Washer first. Open the

accessory package for the Mini Washer

installation accesories.

Water supply hose

connector

2

Connect the water supply hose of Mini

Washer to the COLD water supply hose

connector.

3

Connect the additionally provided water

supply hose of Main Washer to the cold

water supply hose connector and cold water

tap.

Water supply hose

connector

NOTE

• Make sure the water supply hose is not kinked

or pinched.

17

EN

Installing the Drain Hose

• The drain hose should not be placed higher

than 100 cm above the floor. Water in the

appliance may not drain or may drain slowly.

1

Insert the band clamp onto the drain hose

elbow. Pliers may be required to open the

clamp so it can be fitted to the rubber end

of the hose.

Band clamp

2

With the hose leading up from the elbow,

firmly insert the elbow onto the drain outlet

on the back of Mini Washer.

3

Adjust the band clamp with pliers to keep

the hose securely in place and prevent

leaking.

Band clamp

Using the Drain Hose Connector

1

Connect the drain hose of Main Washer

and Mini Washer to the drain connector.

2

Insert the included band clamps on to the

ends of the two drain hoses.

3

Push the drain hoses firmly onto the drain

connector.

Drain hose

connector

CAUTION

• Adjust the band clamps to prevent the hoses

from coming loose or leaking. Failure to do so

could result in flooding. Use of the drain

connector helps avoid siphoning, odors, or

improper draining.

• Make sure the drain hoses are not kinked or

pinched. This is a potential cause of drainage

problems or noise.

NOTE

• Depending on the installation environment,

you may have to purchase a separate drain

hose connector. The connector supplied will

suit a standard laundry tub side drain hole.

18

EN

Leveling the Appliance

If the floor is uneven, turn the adjustable feet as

required (Do not insert pieces of wood etc.

under the feet). Make sure that all four feet are

stable and resting on the floor and then check

that the appliance is perfectly level (Use a spirit

level).

• Once the appliance is level, tighten the lock

nuts up towards the base of the appliance. All

lock nuts must be tightened.

Raise Lower

Lock nut

Tighten all 4

lock nuts securely

Diagonal Check

• When pushing down on the edges of the top

plate diagonally, the appliance should not

move up and down at all (check both

directions). If the appliance rocks when

pushing the machine top plate diagonally,

adjust the necessary foot or feet again.

WARNING

• After stacking the Main Washer on to the Mini

Washer, use the leveling feet on Mini Washer

to level both. Main Washer´s leveling feet

should be already be firmly snug against the

Mini Washer and the locknuts turned

counter-clockwise to secure them.

NOTE

• Timber or suspended type flooring will

contribute to excessive vibration and

unbalance. Re enforcement or bracing of the

timber floor may need to be considered to

stop or reduce excessive noise and vibration.

Using Anti-Slip Sheets (Optional)

If you install the appliance on a slippery

surface, it may move because of excessive

vibration. Incorrect leveling may cause

malfunction through noise and vibration. If this

occurs, install the anti-slip sheets under the

leveling feet and adjust the level.

1

Clean the floor to attach the anti-slip sheets.

• Use a dry rag to remove and clean foreign

objects and moisture. If moisture remains,

the anti-slip sheets may slip.

2

Adjust the level after placing the appliance

in the installation area.

3

Place the adhesive side of the anti-slip

sheets on the floor.

• It is most effective to install the anti-slip

sheets under the front feet. If it is difficult

to place the pads under the front feet,

place them under the back feet.

This side up

Adhesive side

4

Ensure the appliance is level.

• Push or rock the top edges of the

appliance gently to make sure that the

appliance does not rock. If the appliance

rocks, level the appliance again.

NOTE

• You can obtain anti-slip sheets from an LG

Service Centre or a Hardware store.

19

OPERATION

EN

Using the Appliance

1

Sort laundry and load items.

• Sort laundry by fabric type, soil level,

colour and load size as needed. Open the

door and load items into the washing

machine.

2

Add cleaning products.

• Add the proper amount of detergent with

the detergent measuring cup to the

washing drum evenly.

3

Closing the door and drawer.

4

Turn on the washing machine.

• Press the Power button to turn on the

washing machine.

5

Choose the desired washing cycle.

• Press the cycle button repeatedly until the

desired cycle is selected.

6

Begin cycle.

• Press the Start/Pause button to begin the

cycle. The Mini washer will agitate briefly

without water to measure the weight of the

load. If the Start/Pause button is not

pressed within 15 minutes, the washing

machine will shut off and all settings will

be lost.

7

To Add softener.

• The Mini Washer will chime during the

final rinse for approximately 20 seconds.

When this occurs, press the Start/Pause

button, then slide open the drawer and

open the Lid to manually add the softener,

and then after closing the lid and drawer,

press Start/Pause to resume the cycle. If

no attempt is made to add softener, the

machine will automatically continue to

wash 30 seconds after the chime has

finished sounding.

8

End of cycle.

• When the cycle is finished, another

melody will sound. Immediately remove

your clothing from the washing machine to

reduce wrinkling and odors.

• After washing is complete, wipe off the

washing machine door, gasket and inside

the washing drum with a soft dry towel for

clean washing.

Page is loading ...

LG WTP20Y, TWIN171411B, TWIN171611C, WTP20WY User manual

Related papers

Other documents