The ANKO BL9710A-SA is a versatile and powerful blender designed to make quick work of a variety of blending tasks. With its durable glass jar, sharp stainless steel blades, and multiple-speed settings, you can easily blend fruits, vegetables, nuts, and ice into delicious smoothies, juices, soups, and more. It also features a pulse function for added control and a large capacity jar for blending large quantities of ingredients. Cleaning is a breeze with the dishwasher-safe jar and lid.
The ANKO BL9710A-SA is a versatile and powerful blender designed to make quick work of a variety of blending tasks. With its durable glass jar, sharp stainless steel blades, and multiple-speed settings, you can easily blend fruits, vegetables, nuts, and ice into delicious smoothies, juices, soups, and more. It also features a pulse function for added control and a large capacity jar for blending large quantities of ingredients. Cleaning is a breeze with the dishwasher-safe jar and lid.
Blender
BL9710A-SA
User Manual
PLEASE READ AND SAVE THESE
INSTRUCTIONS FOR FUTURE REFERENCE
1
IMPORTANT SAFEGUARDS
When using the electrical appliance, the below basic safety precautions should be followed:
1. Read all instructions.
2. Before use check that the voltage power corresponds to the one shown on the rating label
found on the appliance.
3. Do not let the supply cord hang over edge of a table or counter.
4. Do not leave the product unattended while it is in use, especially when children are
present.
5. Do not immerse power cord, plug, or product in water or other liquids. If the product falls
into water, immediately disconnect from the mains power outlet. Do not touch or reach into
the water.
6. Do not place on or near a hot gas or electric burner, or in a heated oven.
7. Never operate this product if it has a damaged Power Cord or plug, is not working properly,
has been dropped or damaged, or if the Base has been exposed to water or other liquids. Do not
attempt to examine or repair this product yourself. Any repairs to the product should be carried
out by a qualified electrical person only or the product must be disposed.
8. Do not operate the appliance with a damage cord or plug or after the appliance malfunction
or has been damaged in any manner.
9. If the supply cord is damaged, it must be replaced by qualified electrical person in order to
avoid a hazard or the product must be disposed of.
10. This appliance is not intended for used by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have
been given supervision or instructions concerning use of the appliances by a person responsible
for their safety.
11. Children should be supervised to ensure that they do not play with the appliance.
12. Avoid contacting moving parts.
13. Blades are sharp, handle with care.
14. The use of any attachments not supplied with the product may cause fire, electric shock or
injury.
2
15. To prevent damage to the blade and/or the electric motor the appliance must not be used for
blending hard and dry substance.
16. Unplug from mains power outlet when not in use, before putting on or taking off parts, and
before cleaning.
17. To protect against risk of electrical shock do not put the electric motor unit or power cord in
water or other liquid.
18. Do not use outdoors.
19. Keep hands and utensils out of the blending jug while blending to reduce the risk of severe
injury to persons or damage to the blender. A scraper may be used but must be used only when
the blender is not running.
20. To reduce the risk of injury, never place the cutter-assembly blades on the base without
attaching it to the jar properly.
21. Always operate the blender with the jar cover in place.
22. Warning: never use hot liquids or run the appliance empty.
23. Be careful of potential injury from misuse.
24. Care must be taken when handling the sharp cutting blades, emptying the bowl and during
cleaning.
25. Always disconnect the appliance from mains power if it is left unattended and before
assembling, disassembling or cleaning.
26. Switch OFF the appliance and disconnect from mains power before changing accessories or
approaching parts that move in use.
27. This appliance is intended to be used in household and similar applications such as:
– Staff kitchen areas in shops, offices and other working environments,
– Farmhouses,
– By clients in hotels, motels and other residential type environments,
– Bed and breakfast type environments.
28. Be careful if hot liquid is poured into the blender it can be ejected out of the appliance due
to a sudden steaming.
3
29. CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cut-out,
this appliance must not be supplied through an external switching device, such as a timer, or
connected to a circuit that is regularly switched on and off by the utility.
30. For cleaning, please refer to “CLEANING AND MAINTENANCE” section.
WARNING! Do not blend hot liquids. To prevent scalding, DO NOT process boiling liquids or
hot ingredients in the blender. Allow hot ingredients to cool down below 400C before
placing them in the blender.
IMPORTANT!
To prevent damage to the electric motor, the maximum operating time is 1 minute. Allow it
to rest for at least 2 minutes before using it again. After 5 cycles of operation, allow the
blender (electric motor) to cool down to room temperature, allow it to cool down for
approx. 30 minutes before using it again.
Note: The appliance incorporated with a non-self resetting thermal motor protection circuit
to protect the motor from overheating. If the motor shuts OFF while in use, unplug the unit
from main power outlet. Remove the blending jar from motor unit and free the blade of any
obstructions. Allow the unit to cool down for at least 1 hour. After then, plug the unit back
into mains power for normal operation.
4
KNOW YOUR BLENDER
NOTE: The large travel bottle is portable and used for holding juice for drinking.
The Max. capacity of glass jar is 1750mL.
FOR THE INITIAL USE
1. Unpack the appliance and place all parts on a horizontal surface.
2. Immerse the jar, jar lid and measuring cup in warm soapy water and rinse them and dry.
Never immerse motor unit in water for cleaning to prevent the risk of electric shock.
CAUTION: The blades are very sharp. Please handle carefully.
5
OPERATION
VEGETABLE/FRUIT JUICE
1. Lay the appliance on a flat horizontal surface and make sure it is unplugged and the “Speed
knob” turned to “OFF” position before operating.
2. Prepare the vegetable/fruit well. Take carrot for example. First, peel the carrot and cut it into
cubes with a size of 15mm*15mm*15mm, then remove the measuring cup and jar lid. Put the
carrot cubes into the jar. Usually certain amount of purified water has to be added to facilitate
the smooth running of appliance. The proportion of the carrot and water is 3:2 (1050g Carrot +
700g Water). The amount of mixture should not exceed the maximum level as indicated on the
jar.
NOTE: Never use hot liquids or run the appliance empty.
3. Close the jar lid and measuring cup well in position. The jar lid must be closed properly, or
the appliance cannot be activated.
4. Install the jar onto the motor unit. Make sure that the jar is installed correctly.
5. Connect the appliance with power source.
6. Turn the “Speed knob” to “ON” position, and the indicators of the four buttons will light
up. Press the “Pulse” button, and its corresponding indicator lights solidly while the indicators
of the other three buttons will be OFF, then the appliance starts to work. Alternatively, you can
turn the “Speed knob” to the speed settings ranged between “Min” and “Max” to extract juice
at your desired speed.
NOTE: The speed cannot be adjusted by the “Speed knob” when the appliance is running
under the “Pulse” mode.
NOTE: During the working process of extracting juice, if you want to stop the appliance, you
can release the “Pulse” button or turn the “Speed knob” to “OFF” position.
7. During operation, you can remove the measuring cup and add ingredients into the jar through
the center opening on the jar lid, and then replace the measuring cup.
NOTE: Do not remove the jar from the motor unit during working process. If it is necessary to
remove the jar, please firstly turn off the appliance to stop operation and then remove the jar.
6
CAUTION: Minimum 30minutes rest time must be maintained between two continuous
cycles.
8. After finishing extracting juice, the appliance will stop working automatically and the
indicators of four buttons will light up. You can also turn the “Speed knob” to “OFF” position
to stop the appliance when you achieve the desired blending result.
9. Unplug the appliance and then remove the jar from the motor unit. Carefully remove the jar
lid, then pour and serve.
CAUTION: The appliance must be disconnected from mains power before removing the
jar.
SMOOTHIE
1. Lay the appliance on a flat horizontal surface and make sure it is unplugged and the “Speed
knob” is turned to “OFF” position before operating.
2. Put the ingredients into the jar. Make sure the amount of ingredients does not exceed the
maximum level as indicated on the jar. Follow the recipe and instructions below.
Recipe
Ingredient
Banana smoothie
Milk: 1/3 of rated capacity
Banana: 1/6 of rated capacity, cut into 2cm in length.
Ice cube: 5pcs, 2.5*2.5*2.5cm
White sugar: 2 spoons
NOTE: Never use hot liquids or run the appliance empty.
3. Close the jar lid and measuring cup well in position. The jar lid must be closed well in
position, or the appliance cannot be activated.
7
4. Install the jar onto the jar base. Make sure that the jar is installed correctly in position.
5. Connect the appliance into a mains power outlet socket.
6. Turn the “Speed knob” to “ON” position, and the indicator lights on the four buttons will
light up. Press the “Smoothie” button, and its corresponding indicator lights up solidly while
the indicators of the other three buttons will extinguish, then the appliance starts to work.
Alternatively, you can turn the “Speed knob” to the speed settings ranged between “Min” and
“Max” at the “Speed knob” to make smoothie at your desired speed.
NOTE: The speed cannot be adjusted by the “Speed knob” when the appliance is running
under the “Smoothie” mode.
NOTE: During the blending process, if you want to stop the blender, press “Smoothie” button
again or turn the “Speed knob” to “OFF” position.
7. During operation, you can remove the measuring cup on the lid and add ingredients into the
jar through the center opening on jar lid cover, and then place the measuring cup.
NOTE: Do not remove the jar from the motor unit during blending. If it is necessary to remove
the jar, first turn OFF the appliance and then remove it.
CAUTION: Minimum 30 minutes rest time must be maintained between two continuous
cycles.
10. After finish making the smoothie, the appliance will stop working automatically and the
indicator lights on the four buttons will light up. During operation, you can turn the “Speed
knob” to “OFF” position to stop the appliance when you achieve the desired blending result.
11. Unplug the appliance from mains power and then remove the jar from the motor unit.
Carefully remove the jar cover, then pour and serve.
CAUTION: For electrical safety. The appliance must be unplugged from mains power before
removing the jar.
8
ICE CRUSH
1. Lay the appliance on a flat horizontal surface and make sure it is unplugged and the “Speed
knob” is turned to “OFF” position before operating.
2. Prepare some ice cubes with a size of 15mm*15mm*15mm, then remove the measuring cup
and jar lid. Put the ice cubes into the jar. Purified water has to be added to facilitate the smooth
running of appliance. The proportion of the ice and water is 2:3. The amount of mixture should
not exceed the maximum level as indicated on the jar.
3. Close the jar lid and measuring cup correctly in position. The jar lid must be closed properly,
or the appliance cannot be activated.
4. Install the jar onto the jar base. Make sure that the jar is installed correctly in position.
5. Connect the appliance into a mains power outlet socket.
6. Turn the “Speed knob” to “ON” position, and the indicator lights on the four buttons will
light up. Press the “Ice crush” button, and its corresponding indicator light will light up solidly
while the indicators of the other three buttons will be switched OFF and the blender will start to
work. Alternatively, you can turn the “Speed knob” to the speed settings ranged between
“Min” and “Max” at the “Speed knob” to crush ice at your desired speed.
NOTE: The speed cannot be adjusted by the “Speed knob” when the appliance is running in
the “Ice crush” mode.
NOTE: When crushing ice, if you want to stop the blender, press on the “Ice crush” button
again or turn the “Speed knob” to “OFF” position.
7. During operation, you can remove the measuring cup and then add ingredients into the jar
through the center opening of jar lid cover during operation, and then replace the measuring
cup.
NOTE: Do not remove the jar from the motor unit during working process. If it is necessary to
remove the jar, first turn OFF the appliance and then remove it.
CAUTION: Minimum 30minutes rest time must be maintained between two continuous
cycles.
9
8. After finishing crushing ice, the appliance will stop working automatically and the indicator
lights on the four buttons will light up. During operation, you can turn the “Speed knob” to
“OFF” position to stop the appliance when you achieve the desired blending result.
9. Unplug the appliance and then remove the jar from the motor unit. Carefully remove the jar
cover, then pour and serve.
CAUTION: The appliance must be disconnected from mains power before removing the jar.
CLEANING AND MAINTENANCE
NOTE: Before cleaning, make sure the appliance is unplugged and the “Speed knob” is turned
to “OFF” position.
1. The Auto-clean feature can help to clean the blender and blade assembly easily and rapidly in
complete safety. Follow the operation of (1)-(4) as below to perform the auto-clean function.
(1) After use, reassemble the jar and pour about 400-500ml warm water into it.
(2) Turn the “Speed knob” to “ON” position, and the indicator lights on the four buttons will
light up. Press the “Auto clean” button once, and its corresponding indicator light will light up
solidly while the indicator lights on the other three buttons will be OFF, then the appliance will
begin the auto cleaning function.
(3) When finished, the appliance will stop working automatically and the indicator lights on the
four buttons will light up.
(4) Unplug the appliance and remove the jar from the motor unit, then rinse the jar under
running water.
2. Wipe the outer surface of motor unit with a damp cloth. Do not use abrasive cleansers. Never
immerse in water or other liquid for cleaning.
3. All parts except the motor unit are dishwasher safe. You can also wash the parts, except the
motor unit, in warm, soapy water.
4. Dry all parts and then reassemble them again. But store the appliance without the jar lid
closed completely to allow air to circulate and prevent jar odours.
10
5. If any problem has been encountered during use, never disassemble the Motor Unit by
yourself. There are no user serviceable parts inside. For electrical safety, any repairs to the
product should be carried out by qualified electrical person only.
WARNING:
(1) The blades are very sharp. Handle carefully when cleaning.
(2) Do not use abrasive cleaners. Never immerse the Motor Unit in water for cleaning.
TECHNICAL SPECIFICATION
Voltage: 220-240Va.c. 50-60Hz
Power: 1000W
Jar Max. Capacity: 1750mL
11
12 MONTH WARRANTY
Thank you for your purchase from Kmart.
Kmart Australia Ltd warrants your new product to be free from defects in materials and
workmanship for the period stated above, from the date of purchase, provided that the product
is used in accordance with accompanying recommendations or instructions where provided.
This warranty is in addition to your rights under the Australian Consumer Law.
Kmart will provide you with your choice of a refund, repair or exchange (where possible) for
this product if it becomes defective within the warranty period. Kmart will bear the reasonable
expense of claiming the warranty. This warranty will no longer apply where the defect is a
result of alteration, accident, misuse, abuse or neglect.
Please retain your receipt as proof of purchase and contact our Customer Service Centre on
1800 124 125 (Australia) or 0800 945 995 (New Zealand) or alternatively, via Customer Help
at Kmart.com.au for any difficulties with your product. Warranty claims and claims for
expense incurred in returning this product can be addressed to our Customer Service Centre at
690 Springvale Rd, Mulgrave Vic 3170.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a major failure and compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or
replaced if the goods fail to be of acceptable quality and the failure does not amount to a major
failure.
For New Zealand customers, this warranty is in addition to statutory rights observed under New
Zealand legislation.
12
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
The ANKO BL9710A-SA is a versatile and powerful blender designed to make quick work of a variety of blending tasks. With its durable glass jar, sharp stainless steel blades, and multiple-speed settings, you can easily blend fruits, vegetables, nuts, and ice into delicious smoothies, juices, soups, and more. It also features a pulse function for added control and a large capacity jar for blending large quantities of ingredients. Cleaning is a breeze with the dishwasher-safe jar and lid.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
RAMTONS RM/477 User manual
-
-
Bella Pro Series 7-Speed Blender Owner's manual
-
Cuisinart BFP-703BC Smart Power Duet Blender User manual
-
Westinghouse WST2019W User manual
-
Smeg BLF01PKUS Owner's manual
-
Amazon Renewed SPB-650GW Owner's manual
-
Philips HR3868/01 User manual
-
-