2. Home
  3. Domestic appliances
  4. Sanitary ware
  5. Kohler
  6. K-22860IN
K-22860IN

Kohler K-22860IN User manual

  • Hello! I've reviewed the installation instructions for the KOHLER PURECLEAN 22860IN-0 and EC22860IN-0 universal bidets. The document provides step-by-step guidance on installation, including preparation steps, connecting water supply and using the wash functions. I'm ready to assist you with any questions you may have about these bidets, their installation process or mentioned safety precautions and cleaning and maintenance.
  • What should I do if the product is damaged when unpacked?
    What tools are required for installation?
    What should I do before starting installation?
    How do I operate the bidet?
PURECLEAN®
BEFORE YOU BEGIN
• Please read these instructions carefully to familiarize yourself with the required tools, materials, and installation
sequences. Follow the sections that pertain to your particular installation. This will help you avoid costly mistakes. In
addition to proper installation, read all operating and safety instructions.
• All information in these instructions is based upon the latest product information available at the time of publication.
Kohler India reserves the right to make changes in product characteristics, packaging or availability at any time without
notice.
• These instructions contain important care, cleaning, and warranty information - please leave instructions for the consumer.
• In case product is damaged when unpacked for first time, please do not install the product and report to customer
care immediately.
Unit: Inches (mm)
Nominal Distance 6-1/4” (158 mm)
Adjustable Distance from 4-9/16” (116 mm) to
7-7/8” (200 mm)
5-1/4”
(133)
• Fixture dimensions are nominal and conform to tolerances according to ASME Standard A112. 19.2M.
• Product illustrations shown are representative only, actual products may vary.
• Kohler Co. reserves the right to make changes in product characteristics, packaging, or availability at any time
without notice.
• Observe all local plumbing and building codes.
• Shut off the water supply.
• Carefully inspect the new fixture for any sign of damage.
• Be very careful while handling vitreous china products.
NOTES
Notice:
TOOLS & MATERIALS REQUIRED (Not supplied)
Measuring Tape
Hacksa w
Spirit Level
(+)
10” Adjustable
Wrench
Thread Sealant
Screwdriver
22860IN-0
INSTALLATION INSTRUCTIONS
1. PREPARATION
• Turn the water supply off.
• Install or relocate the supply tubing and waste pipe as necessary to conform to the rough-in dimensions.
• Install the shut-off valve.
• Install bowl, seat and aka health faucet.
CAUTION:
Do not under size waste piping as it will lead to clogging of the outlet and reduction in rate of waste outflow.
11-3/16”
(284)
3-3/8”
(86)
16-13/16” (427)
ROUGH-IN DIMENSIONS
2-1/8”
(54)
1-1/8”
(29)
INSTALLATION INSTRUCTIONS
22860IN-0 / E 22860IN-0
PURECLEAN® UNIVERSAL BIDET/
PURECLEAN® UNIVERSAL BIDET DUAL PACK
2
INSTALLATION INSTRUCTIONS
12
4
Remove the seat from bowl. Carefully place the universal pureclean onto
bowl. Align the mounting holes of universal
pureclean and bowl.
Rotate mounting disc of universal purclean
to align holes of bowl, if needed.
Turn off water supply.
Remove hose of health faucet from water
supply.
a. Connect nut side of T-connector to water supply
valve. Re-connect hose of health faucet to one side
of T-connector and other side to hose of universal
pureclean.
b. Remove inlet cover from universal pureclean.
c. Connect other end of hose to the inlet of the
universal pureclean.
Install seat back onto the bowl.
a. Fix bolts in hinges of seat. Insert bolts into aligned
holes of bowl and universal pureclean.
b. Tighten nut with help of tightening tool.
a. b.
a. b. c.
3
5
CAUTION:
Make sure that the filter does not fall from universal pureclean
when removing the inlet cover.
3
INSTALLATION PARTS INCLUDED IN BOX
67
1461093
T-Connector Assembly
1409455
Inlet Hose
Turn on water supply valve and check
for any leakage. Tighten connections, if
needed.
a. Rotate clockwise for rear wash.
b. Rotate anti-clockwise for front wash.
Rotate handle of universal pureclean by a quarter-turn
(90°) to each side and check smooth functioning of
each wand.
a. b.
CONSUMER RESPONSIBILITIES
1. Do not stand, knock, or stack heavy objects on the universal pureclean. The load could damage it.
2. Clean the outside surface of your toilet seat with mild soap and warm water. Wipe the surface completely dry with a clean
soft cloth.
3. Do not use any abrasive cleaners as they will scratch and dull the surface. Avoid any detergents, disinfectants, or
cleaning products.
4. Avoid contact with abrasive chemicals and solvents such as nail polish removers, thinners, and aftershave lotions as they
may damage the surface of your toilet seat.
5. To prevent any possible damage to the seat & its components, do not use strong acidic or strong alkaline cleaners. If the
surface becomes excessively dirty, please use a mild general-purpose cleaner.
6. During closure, allow the seat to drop down at itss own pace. Do not force the closure as it may damage the dampers.
7. Avoid direct exposure to strong lights such as sunlight, ultraviolet lamps, etc.
4
SERVICE PARTS
© Kohler Co.2021
1422738
Filter
1471961
Nozzle Pack
1458138
Nozzle Front
1458137
Nozzle Rear
1461092
Water Channel Assembly
1461097
Accessory Pack
1461093
T-Connector Assembly
1409455
Inlet Hose
/