2. Computers & electronics
  3. Audio & home theatre
  4. Headsets
  5. SHOKZ
  6. RDL2089
RDL2089

SHOKZ RDL2089 User manual

  • Hello! I've reviewed the Operating Instruction for the Bone Conduction Headset. This document details how to use the headset, including Bluetooth pairing, music and call control, and safety guidelines. I can answer questions about the headset's features, modes, and functions. Ask me anything!
  • How do I power on the headset?
    How do I connect the headset to my phone?
    How do I answer a phone call?
    How do I switch to SD card mode?
    How to switch between music tracks?
Bone Conduction
Bluetooth Headset
Operating Instruction
1. Power button
2. Volume button
3. Charging port /USB interface
4. Multi-function button
5. Bluetooth signal light
Free your ears to listen to outside sounds and conversations while
enjoying music.The best choice for listening to music, answering
phones, playing games, studying, running, cycling, fitness,
swimming and driving.
Power on: Hold the power button for 3 seconds and the blue light
will be on for 3 seconds. Prompt reads “Bluetooth Mode” in English;
Power off: Hold the power button for 5 seconds. After the red light
flashes, power off. Prompt reads “Power Off” in English;
Connection: After start-up, it enters the pairing state, the red and
blue lights flashing alternately. Switch mobile phones, desktop
computers and laptops to bluetooth mode, search for button618
and then click “Connection”;
Connected: When the headset is connected to the device, the blue
light will flash slowly and the headset prompt sound will be
"connected". After the connection, you can listen to the music, you
can also standby phone calls, etc. on the device.
Pause: When paused, click the left multi-function button to play;
When playing, click the left multi-function button to pause;
Answer the phone: Click the left multi-function button to answer or
hang up the call. Hold the left multi-function button for a few
seconds to reject the call;
nnect;
Volume up/down: Click the button then the volume will increase.
When the volume is turned to the maximum, it will loop back to the
minimum volume.You can also adjust the volume on your phone,
iPad, or computer.
Last: In music state, hold the volume button for 2 seconds to play
the last song;
Next: In music state, hold the multi-function button for 2 seconds to
play the next song;
Charging status:
1.When the headset is charged by using the SV charging stand, it
is turned off and cannot be started-up. The red light is always on
while charging, and the blue light is on when fully charged.The LED
light will go off within 5 minutes after full charge.
2. Connected to the computer with a data cable when the headset
on is charging. By default, it enters PC mode. At this time, you can
copy songs to the SD card and leave the headset on. Press the
power button three times to enter the SD card mode, you can play
the music in it. Press the function button twice to enter bluetooth
mode, reconnecting the bluetooth or waiting for connection.
3.Connected to the computer with a data cable when the headset
off is charging. But if you want to copy songs, you have to turn it on
and then operate in PC mode.
4.The LED light is red when charging, and the red light is always
on.
5.Specification of the charger: Output voltage: DC5V+/-0.25V,
Output current :100mA-250mA
Local playback switch: double-click multi-function button in
bluetooth connection state. The Chinese and English prompt sound
means the switch is successful.
SD card features:
1. Bluetooth is the default mode. Keep the bluetooth connected
when changing SD card in any state.Switch the phone call to
bluetooth if any.
2.In bluetooth mode, double click the left multi-function button to
switch to SD card mode, accompanied by “Local Play” prompt
sound(bluetooth static working).
3.In SD card mode, double click the right multi-function button to
switch to bluetooth mode, accompanied by “Bluetooth
Mode”prompt sound(SD card static working).
4.In SD card mode , reboot when it is power off or shutdown, it will
play from where it stops.
5. When it is paused in the SD card mode, the blue light is always
on.
6.When entering SD card mode after start-up, the background
bluetooth search will stop in 1 minute.
Chargers and Batteries
Before using any charger to charge this headset, please check
whether the specification of the charger meets the requirements. It
is recommended that the output voltage of the charger is
DC5V+/-0.25V, and the output current is 100mA-250mA. If the
charging voltage is too high, the bluetooth headset may be
damaged.
Warning: Only certified charger can be used. Chargers of other
specifications may violate the Qualification and Warranty and may
lead to danger.If the product is shipped with a charging line, it
needs to connect a 3C certified charger or computer to charge it.
Do not collide with this product seriously. Serious collision may
damage the electronic motherboard and battery. This headset uses
a built-in non-removable rechargeable battery. Do not try to remove
the battery from the headset to avoid damaging it. Please store
them in a dry and ventilated place and charge them every two
months when not using headsets for a long period of time.
1.When the connected headset flashes red with "Battery Low"
sound, it indicates that the headset is of low battery. It will
automatically shut down if you continue to use it.
2.Plug the charger into an AC outlet.
Important Safety Instructions
The correct position for wearing the speaker of this device is the
cheek bone in front of the ear. Do not put the speaker in the ear.
Listening to loud music for a long time may cause discomfort.
Please try to use a medium volume to avoid using loud music for a
long time.
Regardless of the volume, the use of headsets will affect your
perception of the surrounding environment. Be careful when using
headsets. Do not throw, hold down or immerse the headset in water.
The headset should be away from fire, water and high pressure
equipment.
This device is not suitable for children under 3 years old for it
contains small parts.
Do not classify it as household waste, but send it to the local
appropriate electrical and electronic equipment recycling station. If
the user violates the above warning content, the company does not
assume any responsibility for personal and property loss.
Important Safety Instructions
Safety information
· In order to avoid accidental swallowing, the headsets should be
kept away from children and pets. The headsets contain lithium
batteries. Medical attention should be sought immediately if
swallowing, and when not in use, the headsets should be stored in
a covered charging case and kept away from children and pets.
· To avoid hearing loss, please use the headsets at a comfortable
and moderate volume.
· Turn down the volume first, put on the headsets, then gradually
turn up the volume until you reach a comfortable listening level.
· If talking through this headset while driving, use it with caution and
comply with applicable laws regarding the use of mobile phones
and headsets. There are some local laws have specific restrictions
on the use of such products while driving. Do not use headsets for
other purposes while driving.
· Care should be taken for the safety of yourself and others if you
use headsets in activities that require concentration, such as
cycling, driving or walking on or near road construction sites or
railway tracks. You should also comply with the relevant laws
regarding the use of headsets.
Remove your headsets or adjust the volume to make sure you can
hear ambient sounds, including alarms and warning signals.
· Children are not allowed to use headsets.
· Do not immerse the headsets in water or expose them to wet
environment for a long time, or wear them in water sports such as
swimming, water skiing and surfing.
· Do not make the equipment and its accessories subjected to
strong impact or move in order to avoid damage to the equipment
and its accessories resulting in battery explosion or equipment
failure.
· Please use a clean, dry and soft cloth to wipe the equipment.
Please stop using the equipment before cleaning and maintenance.
· Do not use external heating equipment such as microwave oven
or hair dryer to dry it.
Wear headsets at the back of neck and speakers on both sides of
cheek bones for comfort.
Please place the equipment or its accessories in a cool, ventilated
place without direct sunlight.
Music playing time - Standard condition: 8 hours Horn impedance: 8Q±3dB
Standby time：15 days Microphone sensitivity:
48±2dB
Charging time：2 hours Weight of the product :
28g
Bluetooth version:5.0 Connection distance: 10
meters
Please turn off the device in medical and health facilities where the
use of wireless devices is expressly prohibited.
Please keep at least 15cm away from the implanted medical device
(e.g. pacer, implanted earwa, etc.) when using this product.
The radio waves generated by the device may affect the normal
operation of implantable medical devices or personal medical
devices, such as pacemakers and implants ears, hearing AIDS, etc.
Please consult with manufacturers about the restrictions on using
this product if you use any of these medical devices.
This product is equipped with a non-removable built-in
rechargeable battery. Do not replace the battery by yourself.
Batteries can only be replaced by authorized service centers.
Please do not dispose of this product and its accessories as
ordinary domestic waste. Please comply with the local laws and
regulations for the disposal of this product and its accessories and
support the recovery action.
Please use the product within the temperature range of 5C-35℃,
and store the equipment and its accessories within the temperature
range of 5℃ -35℃. When the environment temperature is too high
or too low, it may cause equipment failure. Battery performance is
limited at temperatures below 5℃.
Do not place the device near heat sources or exposed fire sources,
such as electric heaters, microwave ovens, water heaters, stoves,
candles or other sources that may produce high temperature.
Do not wrap, seal, cover towels or place other items on the
equipment. Do not use the equipment when it is placed a closed
environment like boxes, etc..
You should take basic preventive measures when using this
product, the specific contents are as follows:
Please read all the instructions before using the charging case:
- If a charging box is used near a child, it must be closely monitored
to prevent injury.
-The charging box must not touch water, rain, liquid or snow and
other substances like this.
- A risk of fire or injury may happen when using a power supply or
charger that is not recommended or sold by the battery pack
manufacturer. - Do not use the charging box beyond the rated
output power.
- Do not use damaged or modified charging boxes. Damaged or
modified batteries can cause unpredictable dangers such as fire,
explosion or injury.
- Do not remove the charging box. Improper reorganization can
result in the risk of fire or injury.
- Do not disassemble, squeeze or throw the charging box into a fire
or put it in high temperature. Exposure to fire or at temperatures
over 100°C may cause an explosion.
- Only qualified maintenance personnel can use the same spare
parts to perform maintenance operations
· Do not modify the product without authorization.
· Contained accessories may cause asphyxia. Not suitable for
children under 3 years of age.
- Only use this product under the condition of power supply (such
as UL, CSA VDE, CCC) which has been approved by relevant
authorities and meets local regulatory requirements.
· Do not overheat products containing batteries (e.g. keep away
from direct sunlight and fire sources).
· Wipe the sweat off the headset and charging case before charging
· Waterproof splash is not a permanent condition and the level of
protection can be reduced due to normal wear and tear.
China List of Restricted Use of Hazardous Substances
Name and composition of a toxic or hazardous substance or element
Toxic or hazardous substance or element
Part name
Lead
(Pb)
Amercury
(Hg)
Cadmium
(Cd)
Hexavalent
chromium
(CR (VI))
Polybrominated
diphenyl ether
(PBDE)
Printed
circuit board
X
O
O
O
O
Metal parts
X
O
O
O
O
Plastic parts
O
O
O
O
O
the Speaker
X
O
O
O
O
Cable
X
O
O
O
O
中国危害物质限用表
有毒或有害物质或元素的名称及成分
有毒或有害物质和元素
零件名称
铅(Pb)
汞件(Hg)
镉(Cd)
六价铬(CR(VI))
多溴化联（PBB）
多溴二苯醚(PBDE)
印刷电路板
X
O
O
O
O
O
金属零件
X
O
O
O
O
O
塑料零件
O
O
O
O
O
O
扬声器
X
O
O
O
O
O
线缆
X
O
O
O
O
O
This form is prepared in accordance with SJ/T11364.
O: means that the content of the hazardous substance in all
homogeneous materials of the part is below the limit requirements
stipulated by GB/T26572
X: means that the content of the hazardous substance in at least
one homogeneous material of the part exceeds the limit
requirements specified by GB/T26572 but there is no mature
alternative program in the industry at present, which meets the EU
RoHS quality and environmental protection requirements.
Under the normal state of environmental protection, use period for
this product is 5 years. Some parts may also have an
environmentally friendly life label that the service life is subject to
the number in the logo. Due to different models, the product may
not include all the above parts, the actual sales configuration of the
product shall prevail.
Description:
1. Circuit modules: ceramic or glass of electronic components, IC
chips and ferroalloy/copper alloy connectors contain lead.
2. Wire: the copper alloy in the needle part contains lead.
Product Service Policy
In the course of normal use of the product, if the product appears
non-man-made damage to the performance of the fault, you can
enjoy free maintenance service.The warranty period covers 12
months from the date of purchase.
2. Consumers cannot enjoy the warranty rights and interests for
any one of the following circumstances,
① Man-made damage;
② Out of warranty period;
(3) No warranty card and valid invoice, except to prove that the
product is within the warranty period;
④ The warranty card is inconsistent with the product model
identification, or the warranty card is altered;
⑤ The SN barcode is removed, except those that can provide
product invoice and warranty card;
⑥ Accessories damage caused by improper use，storage and
maintenance；
⑦ Unauthorized disassembly and repair；
⑧ Damage caused by force majeure；
⑨ Defects caused by using non-original fittings.
FCCCaution
Thisdevicecomplieswithpart15oftheFCCRules.Operationissubjecttothe
followingtwoconditions:(1)Thisdevicemaynotcauseharmfulinterference,and(2)
thisdevicemustacceptanyinterferencereceived,includinginterferencethatmay
causeundesiredoperation.
AnyChangesormodificationsnotexpresslyapprovedbythepartyresponsiblefor
compliancecouldvoidtheuser'sauthoritytooperatetheequipment.
Note: ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClass
Bdigitaldevice,pursuanttopart15oftheFCCRules.Theselimitsaredesignedto
providereasonableprotectionagainstharmfulinterferenceinaresidentialinstallation.
Thisequipmentgeneratesusesandcanradiateradiofrequencyenergyand,ifnot
installedandusedinaccordancewiththeinstructions,maycauseharmfulinterference
toradiocommunications.However,thereisnoguaranteethatinterferencewillnot
occurinaparticularinstallation.Ifthisequipmentdoescauseharmfulinterferenceto
radioortelevisionreception,whichcanbedeterminedbyturningtheequipmentoff
andon,theuserisencouragedtotrytocorrecttheinterferencebyoneormoreofthe
followingmeasures:
-Reorientorrelocatethereceivingantenna.
-Increasetheseparationbetweentheequipmentandreceiver.
-Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthe
receiverisconnected.
-Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
This equipmentcomplieswithFCC radiation exposure limits setforthforan
uncontrolledenvironment.
/