Okina USA MB 3XC Owner's manual

  • Hello! I've reviewed the user manual for the OKI MB-3XC ceiling mount, designed for use with the SHDX-755AIDN and SSDX-742AI color dome cameras. This manual provides a step-by-step guide for mounting the camera, starting with drilling the ceiling hole and ending with securing the camera. I'm ready to answer any questions you have about the installation process or components described in the document.
  • What tools are required for mounting?
    How big of a hole should be drilled in the ceiling?
    How many screws are used to fix the dome camera?
    Which direction should the screws go in for base holder?
    How is dome cover put on?
MB-3XC-062007
Drill a 170mm (6.7”)
round hole on ceiling
Put the base holder
with plastic clip atop
ceiling
User Manual for MB-3XC Ceiling Embedded Mount
for SHDX-755AIDN, SSDX-742AI Color Dome Camera
MB-3XC
Then use screwdriver
(counter-clockwise)
to fasten base holder
on ceiling
Use 2 pcs screws to
fix dome camera on
metal plate of base
holder
After camera is
properly adjusted,
put on dome cover by
rotating in the direction
Use 2 screws and
2 screw bolts to fix
2 metal pieces onto
the disc
Then the 2 metal
pieces will be fixed
on the disc
Rotate disc in the
direction shown in
this picture to hold
metal plate
TM
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
STEP 8
To mount the camera on the ceiling:
Contents: 1 Base Holder 2 Metal Plates 1 Disc 2 Screws 2 Screw Bolts
/