2. River of Goods
  3. 20630

River of Goods 20630 User manual

  • Hello! I've analyzed the assembly instructions for the Lamp. This document provides step-by-step guidance on how to safely install the wall-mounted lamp, including important safety precautions and maintenance tips. I'm ready to assist with any questions you have about this document or the lamp's assembly process.
  • What should I refer to for maximum wattage?
    Can I replace the bulb while the lamp is plugged in?
    What should I use to clean the lamp?
ASSEMBLY INSTRUCTION
CAUTION - Refer to the wattage caution label located near the lamp holder for maximum
wattage - do not exceed the maximum wattage.
WARNING - Do not attempt to replace the bulb while the lamp is plugged into a wall receptacle
CARE INSTRUCTIONS - Use only a soft cloth; do not use any chemicals or abrasive cleaners.
IMPORTANT SAFETY INSTRUCTIONS
MADE IN CHINA
E26 Type A.40W X 1 (Not included)
E26 CFL 13W X 1 (Not included)
1. Attach the wall box to the wall by using two
mounting screws(A).
2. Secure the hidden line tube to wall box with two
mounting screws(B).
3. Connect tube (G) to (F) to the light body ,then
carefully pull out excess wire from tube (G) while
assembling to prevent the cord from becoming
twisted and snagged.
4. Nailed (H) to the wall and secure (I) with two
mounting screws (J).
5. Connect the lamp shade (C) to the lamp holder
and secure with the socket ring(D) .(Socket Ring
located on socket)
6. Install bulb (E) not include.
/