Contour RollerWave3 wrist rest Owner's manual

Contour
Brand
Contour
Model
RollerWave3 wrist rest
Type
Owner's manual
RollerWave3
Wrist rest
Installation guide
Removing Wrist Rest
To remove the wrist rest from your RollerMouse Pro 3,
simply apply pressure to the screws that are embed-
ded into the underside of the wrist pads. We recom-
mend using a small Phillips-Head screwdriver to press
against each screw. It is not necessary to unscrew the
screws.
Installing RollerWave3
To install the RollerWave3 to your RollerMouse
Pro3, line up the pegs on the underside of the
RollerWave3 with the coresponding holes on the
RollerMouse Pro3.
Apply pressure until you hear the RollerWave3 click
into place.
  • Page 1 1
  • Page 2 2
  • Page 3 3

Contour RollerWave3 wrist rest Owner's manual

Contour
Brand
Contour
Model
RollerWave3 wrist rest
Type
Owner's manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents