Canarm IVL759A03GD is a light fixture designed for indoor use. It can be mounted on a wall or ceiling and is compatible with a variety of light bulbs, including LED, CFL, and incandescent. The fixture has a modern design and is available in a variety of finishes to match your décor.
Some of the key features of the Canarm IVL759A03GD include:
- Easy to install: The fixture comes with all the necessary hardware for quick and easy installation.
- Durable construction: The fixture is made of high-quality materials that are built to last.
- Versatile: The fixture can be used in a variety of applications, including residential, commercial, and industrial.
Canarm IVL759A03GD is a light fixture designed for indoor use. It can be mounted on a wall or ceiling and is compatible with a variety of light bulbs, including LED, CFL, and incandescent. The fixture has a modern design and is available in a variety of finishes to match your décor.
Some of the key features of the Canarm IVL759A03GD include:
- Easy to install: The fixture comes with all the necessary hardware for quick and easy installation.
- Durable construction: The fixture is made of high-quality materials that are built to last.
- Versatile: The fixture can be used in a variety of applications, including residential, commercial, and industrial.
INSTALLATION:
IVL759A03
09/18
SAFETY PRECAUTIONS:
EASY CONNECT®
INSTALLATION INSTRUCTIONS
NOTE: Product may not look exactly as shown in figures.
1. Attach easy connect
mounting bracket to electrical
box with electrical box screws
(not included).
2. Option 1: Connect (push)
electrical wires from electric box
(house wiring) into correct
inserts.
Option 2: For multiple green
(ground), black (live) and
white (neutral) wires joined in
the electrical box (house wiring),
attach a single “green”, “black”
and “white” jumper wire before
connecting. Strip 7mm from the
6” jumper wires (AWG 12-24)
supplied. Then connect (push)
wires into the correct inserts.
3. Connect (push) electrical
wires from fixture into correct
inserts.
Star
Washer
Stud
Cap
Nut
Fixture
4. Tuck electrical wires into
electrical box and position
fixture over studs on mounting
bracket assembly. Secure
fixture in place with star
washers and cap nuts.
5. Attach the glass shade to
the fixture using the thumb
screws (tighten with fingers
only).
6. Install proper bulb type
and wattage (not included).
1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.
2. WIRING SUPPLIES AS REQUIRED BY LOCAL ELECTRICAL CODE.
3. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY
A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE
HAZARDS INVOLVED.
4. TO CLEAN THE FIXTURE, TURN OFF THE POWER, WAIT FOR IT TO COOL, AND WIPE THE FIXTURE WITH
A CLEAN, SOFT CLOTH.
QUESTIONS OR CONCERNS CONTACT AT:
1-800-265-1833 (English) / 1-800-567-2513 (French)
Monday through Friday 8:00 AM to 5:00 PM E.S.T.
Tel: (613) 342-5424, Fax: (800) 263-4598
L
N
L
N
Fixture
Option 1
Option 2
Black (Live)
White
(Neutral)
Green (Ground)
Easy Connect
mounting
bracket
(L)
Black
(Live)
(L)
Black (Live)
(L)
Black (Live)
N)
White
(Neutral)
N)
White
(Neutral)
N)
White
(Neutral)
Green
(Ground)
Green
(Ground)
Green
(Ground)
Jumper Wire
Jumper Wire
Electrical
box screws
Electrical
Box
L
N
L
N
!
INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS
READ ALL INSTRUCTIONS
IMPORTANT SAFETY
INSTRUCTIONS
SAVE THESE INSTRUCTIONS
TOOLS AND MATERIALS REQUIRED:
Phillips
Screwdriver
Bulb
Thumb
Screw
Shade
IVL759A03
09/18
INSTALLATION:
Etoile
Rondelle
Écrou
A Tete
MISE EN GARDE:
4. Poussez délicatement les fils
à l’intérieur de la boîte
électrique et placez le luminaire
sur les goujons sur la ferrure
de montage. Serrez le luminaire
en place à l’aide des écrous
étoilés et les écrous à capuchon.
5. Posez l’abat--jour sur la
fixture à l’aide de vis à doigt
(surrez seulement qu’au doigt).
6. Posez l'ampoule de type et
de wattage requis (en sus).
1. Posez la ferrure de
montage easy connect à la
boîte électrique à l'aide des vis
de la boîte électrique (en sus).
2. Option 1: Poussez pour
brancher les fils de la boîte
électrique (courant de la
maison) dans les insertions
appropriées.
Option 2: Lorqu’il y a des
multiples de fils dans la boîte
électrique , vert (mise à terre),
noir (sous tension), blanc
(neutre), poser seulement
qu’un de chaque fil soit vert,
noir et blanc avant pour la
connexion. Retirez 7mm de la
gaine d'un fil de pontage de 6''
(AWG 12-24) inclus. Posez
(poussez) les fils dans les
insertions appropriées.
3. Branchez (poussez) les fils
électriques du luminaire dans
les insertions appropriées.
MODE D’ INSTALLATION®
CONNECTEUR EASY CONNECT
PH: (450) 665-2535, FX: (450) 665-0910
QUESTIONS OU INFORMATION COMMUNIQUE AVEC AU:
1-800-265-1833 (Anglais) / 1-800-567-2513 (Français)
Du lundi au vendredi entre 8:00H et 17:00H H.N.E.
Fixture
1. FERMER LE COURANT AU DISJONCTEUR AVANT DE DÉBUTER L’INSTALLATION DE LA FIXTURE.
2. FOURNITURES ÉLECTRIQUES TELLES QUE PRESCRITES PAR LES NORMES LOCALES.
3. CE PRODUIT DOIT ÊTRE INSTALLÉ SELON LE CODE D’INSTALLATION PERTINENT, PAR UNE PERSONNE
QUI CONNAIT BIEN LE PRODUIT ET SON FONCTIONNEMENT AINSI QUE LES RISQUES INHÉRENTS.
4. POUR NETTOYER LE LUMINAIRE, L’ÉTEINDRE, ATTENDRE QU’IL SOIT FROID, PUIS LE NETTOYER AVEC
LINGE PROPRE ET DOUX.
N.B.: Peut différer de l’illustration.
Goujon
Fil De Pontage
Fil De
Pontage
(N)
Blanc
(Neutre)
(N)
Blanc
(Neutre)
(N)
Blanc
(Neutre)
(L)
Noir
(Sous Tension)
(L)
Noir
(Sous Tension)
(L)
Noir
(Sous Tension)
Vert
(Mise À Terre)
Vert
(Mise À Terre)
Vert
(Mise À Terre)
Ferrure de
montage Easy
Connect
Blanc
(Neutre)
Vert
(Mise À Terre)
Noir
(Sous Tension)
Vis De La Boîte
Électrique
Fixture
Option 1
Option 2
L
N
Boîte
électrique
L
N
L
N
L
N
Tournevis A
Phillips
!
INSTRUCTIONS CONCERNANT LE RISQUE
D’INCENDIES OU LES DOMMAGES CORPORELS
LISEZ TOUTES LES INSTRUCTIONS
INSTRUCTIONS DE SÛRETÉ
IMPORTANTES
GARDEZ CES INSTRUCTIONS
OUTILS ET MATERIAUX REQUIS:
Ampoule
Vis A Doigt
Abat-jour
-
1
-
2
Canarm IVL759A03GD Installation guide
- Type
- Installation guide
- This manual is also suitable for
Canarm IVL759A03GD is a light fixture designed for indoor use. It can be mounted on a wall or ceiling and is compatible with a variety of light bulbs, including LED, CFL, and incandescent. The fixture has a modern design and is available in a variety of finishes to match your décor.
Some of the key features of the Canarm IVL759A03GD include:
- Easy to install: The fixture comes with all the necessary hardware for quick and easy installation.
- Durable construction: The fixture is made of high-quality materials that are built to last.
- Versatile: The fixture can be used in a variety of applications, including residential, commercial, and industrial.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
in other languages
- français: Canarm IVL759A03GD Guide d'installation
Related papers
-
Canarm IFM742A13BNW Installation guide
-
-
-
-
-
-
Canarm IOL572BK User manual
-
-
-
Canarm IOL582BK User manual
Other documents
-
CANARMNA Canarm Orbit User manual
-
Bel Air Lighting 2514 BN Operating instructions
-
CANARMNA IFM676A15 User manual
-
CANARMNA IWF256A01BPT User manual
-
CANARMNA IPL1095A01 User manual
-
CANARMNA IPL785B01 User manual
-
CANARMNA IPL326A01 Operating instructions
-
CANARMNA IPL1097A01BK User manual
-
Allen + Roth 2602001 User manual
-
Lithonia Lighting LTNLECF M6 Installation guide
