Noble House 300934 Installation guide

Type
Installation guide

This manual is also suitable for

TABLE
CAUTION: You must read this before you proceed
CAUTION : This Table is NOT a TOY.
Keep your child / children at bay in the process of assembly.
For turning the Table and to prevent damage to the Table, 02 persons may be needed to
execute this actio
n
Noble House Home Furnishings LLC
1 of 5
Before Beginning Assembly:
Label Picture
Description
Qty
Picture
Description
Qty
Table Top
Legs
A
B
1
4
1
2
3
Allen Key
Washer
9
9
1
Label
Bolt (M8x60mm)
Noble House Home Furnishings LLC
2 of 5
OVER VIEW
FRONT FACING
Table Top(A)
Leg(B)
T
his Table has multiple parts and may require up to 30 minutes to assemble.
To give you an overview of the Table parts, the above picture is to help you put the
various parts into perspective.
Please read through the instructions below to familiarise yourself with the parts and
steps before assembly.
Step 1
Unpack and place all parts on a clean, non-marring surface.
Noble House Home Furnishings LLC
3 of 5
Step 2
A
B
Stand the Table up
Inspect Table and make sure all parts are adequately connected.
Your Table is ready for use.
This Table can only be used on a flat, level surface.
Step 3
Attach Leg(B) to the Table Top(A) using Bolt (
) and Washer(
) with Allen Key(
).
Do not fully tighten the Bolts.
Repeat the same process with the remaining three Legs(B)
CAUTION: When tightening the Bolts tighten sequentially. DO NOT tighten any Bolt
fully and then move towards the next one. This could cause the frame to warp.
If the Table is not stable, it could lead to damage to the product.
3
1
2
Noble House Home Furnishings LLC
4 of 5
Noble House Home Furnishings LLC
5 of 5
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Noble House 300934 Installation guide

Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI