Milescraft 1604 User guide

STEP 1

Release the Clever Lever locking tab

Using a small screw driver or other pry device, elevate the tab slightly and remove the Clever Lever.

STEP 2

Position the new Clever Lever

Insert the replacement Clever Lever in the body aligning the lever “circle” below the locking tab.

STEP 3

Secure the lever

While holding the Clever Lever “circle” positioned under the locking tab, push the heel towards the

toe; the heel will push the lever into the locked position.

You will hear a “click” sound when the Clever Lever is secured by the tab.

SandDevil is ready to be put into service.

Changing the SandDevil Clever Lever

www.milescraft.com

This manual is also suitable for

Download PDF