Page is loading ...
TM
TM
TM
TM
PART DESCRIPTION
NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
TOP
QTY 1
SIDE (L&R Same)
QTY 2
BOTTOM SHELF
QTY 1
5/14
HARDWARE DESCRIPTION
NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
6/14
ALLEN KEY
QTY 1
DOWEL
8 X 25mm
QTY 8
ALLEN KEY BOLT
M6 X 30mm
QTY 12
ALLEN KEY SCREW
M6 X 30mm
QTY 8
Required -
Flathead screwdriver
Phillips screwdriver
Rubber mallet
Not Included
D
5
1. Attach 4 Cam Lock Pins 5 to pre-drilled holes at back of Drawer Front D .
2. Align Cam Lock Pins with pre-drilled holes and attach Drawer Sides EL , ER .
3. Insert 2 Cam Locks 5 into pre-drilled holes on each Drawer Side EL , ER .
4. Use flathead screwdriver secure Cam Locks.
G
D
F
G
1. Align and insert dowels on Support Drawer Bottom H into pre-drilled holes on
Drawer Back F .
2. Align Drawer Back F with Drawer Bottom G and press firmly into slot.
3. Attach Drawer Back F using 2 Allen Key Screws 4 through pre-drilled holes on
each Side EL , ER .
4. Use Allen Key 2 to tighten screws. Do not over-tighten.
Repeat Step 1-3 for the second drawer.
2
1
3
1
3
B
A
B
2
1
1
3
TM
TM
WARRANTY
/