COMPANION COMP824 Owner's manual

Brand: COMPANION

Model: COMP824

Type: Owner's manual

COMPANION COMP824 is an outdoor shower stand, ideal for camping, beach, or other outdoor activities. It's lightweight, compact, and easy to assemble, making it convenient for various uses.

The stand features an adjustable shower head for optimal positioning and a water flow control valve for adjusting the water pressure. It has a quick-connect fitting for attaching to the Aquacube® Camp Shower or other portable water pumps and can also connect directly to a garden hose for added versatility.

The height-adjustable design allows you to customize the stand's height for a comfortable showering experience. It's designed for use with Aquacube® Digital and Logic models but can also be used with other portable water pumps or connected directly to a standard garden hose.

COMPANION COMP824 is an outdoor shower stand, ideal for camping, beach, or other outdoor activities. It's lightweight, compact, and easy to assemble, making it convenient for various uses.

OWNERS MANUAL

Part No.

COMP824

OUTDOOR

SHOWER STAND

INTRODUCTION

Your Aquacube

Outdoor Shower Stand includes:

QUICK CONNECT

FITTING

FLOW

CONTROL

SHOWER

HEAD

The Aquacube

Outdoor Shower Stand is ideal for the campsite, beach house or your

next outdoor adventure. Compact, lightweight and easy to assemble, it is designed

for use with Aquacube

Digital and Logic models. Can also be used with other

portable water pumps or connects direct to standard garden hose.

Features

• Adjustable shower head

• Inline water ﬂow control

• Quick connect ﬁtting for attachment to Aquacube

Camp Shower

• Easy to operate and set up

• Height adjustable

• Compact and lightweight

Designed for use with:

COMP812 - Digital COMP825 - Logic

PARTS AND COMPONENTS

2. Shower Head

1. Height Adjustment Nut

Shower Head Section

Base

3. Water Flow Control

4. Locking Nut

5. L eg

6. Water Inlet Fitting

ASSEMBLY

Shower stand consists of two parts – Base and Shower

Head Section.

TO ASSEMBLE

Step 1. Locate a suitable solid and level surface.

Step 2. Fold out legs until they lock in position. Loosen

lock nut and slide water inlet upwards then

retighten lock nut. (Fig.1)

Step 3. Check that the rubber “O” ring is located in

the brass ﬁtting on the base of the shower

head section before attaching to the water

ﬂow control – take care not to cross thread the

connection. (Fig.2)

Step 4. Holding the shower head section ﬁrmly, position

on the thread of the ﬂow control and rotate the

brass nut in a clockwise direction until tight –

take care not to over tighten. (Fig.3)

Step 5. To extend shower head section, hold and loosen

the height adjusting nut in an anti-clockwise

direction, slide the shower head upwards until

the desired height is reached then retighten the

nut in a clockwise direction. (Fig.4)

ASSEMBLY INSTRUCTIONS

O-ring

TO CONNECT

Step 1. Assemble Aquacube

Camp Shower as per

instructions – do not turn ON.

Step 2. Unscrew shower head from the hose on the

Aquacube

Camp Shower. (Fig.1)

Step 3. Ensure that the O-ring remains located in hose

ﬁtting before attaching Quick Connect Fitting

(included with shower stand). (Fig.2A & 2B)

Step 4. Attach the Quick Connect Fitting to water inlet

on the shower stand. (Fig.3)

CONNECTING TO AQUACUBE

O-ring

TO OPERATE

NOTE: The shower head settings, SHOWER and

CENTER, can only be used when operating with an

Aquacube

Camp Shower.

The Aquacube Camp Shower will NOT provide suitable

water ﬂow if other settings are selected. These may be

suitable when connected directly to a tap hose.

Step 1. Ensure stand is assembled securely. Adjust to

required height.

Step 2. Adjust shower head position. (Fig.1)

Step 3. Select required setting on shower head.

SHOWER or CENTER setting can only be used

with Aquacube

Camp Shower). (Fig.2A & 2B)

Step 4. Turn Water Flow Control valve to ‘On’ position.

(Fig.3)

Step 5. Operate Aquacube

Camp Shower as

per normal.

Step 6. Once operating, the water ﬂow can be turned

On and Off using the Water Flow Control valve

on the shower stand. (Fig.3)

Step 7. To reignite the burner, turn the Water Flow

Control to ‘ON’ and water will ﬂow from the

shower head and the burner will reignite

within 5 to 10 seconds.

NOTE: The Outdoor Shower Stand can also be used

when directly connected to a garden water tap or other

water pumps.

IMPORTANT: Water remaining in the Aquacube

Camp

Shower while the ﬂow is stopped may become hot.

When the ﬂow is resumed the user must check the

temperature output to ensure that is it suitable and

not too hot.

OPERATING INSTRUCTIONS

ON OFF

SPECIFICATIONS

SPARE PARTS

A selection of spare parts and components are available

for your appliance to ensure years of operation:

1 COMP824-01S Quick Connect Fitting

2 COMP824-02S Flow Control Valve

3 COMP824-03S Flow Control Valve O-Ring

4 COMP824-04S Shower Head

5 COMP824-05S Stand Lock Nut

SPECIFICATIONS

Part No: COMP824

Dimensions (assembled and

adjusted to full height):

230cm

Weight (assembled): 1kg

• The Aquacube

Outdoor Shower Stand is not designed to be used as a permanent

shower. It is suitable for camping purposes only.

NOTE: When used with an Aquacube

Camp Shower, the water pressure and ﬂow

rate from the shower head is subject to a number of factors including:

• Pump condition

• Battery condition

• DC voltage input

Companion is distributed by Companion Brands Bundoora Victoria 3083

www.companionleisure.com.au

COMP4779

COMPANION COMP824 Owner's manual

Brand: COMPANION

Model: COMP824

Type: Owner's manual

COMPANION COMP824 is an outdoor shower stand, ideal for camping, beach, or other outdoor activities. It's lightweight, compact, and easy to assemble, making it convenient for various uses.

Download PDF

report

COMPANION COMP824 Owner's manual

COMPANION COMP824 Owner's manual

Related papers

Other documents