VerVision
300AF
Quick Guide
1. Connect the Power.
VGAOUTVGAINDC12V
LIGHT
BOX
Power adapter
Power cord
Wall outlet
2. Select the video display output.
TV RGB
VIDEO S-VIDEO DVI
TV RGB
VIDEO S-VIDEO DVI
Switch AVerVision Port Device
a. RGB
VGA OUT
LCD/DLP projector
b. TV
S-VIDEO
Television
a. RGB Connection
VGAOUTVGAINDC12V
LIGHT
BOX
LCD/DLP projector
RGB cable
(VGA Cable)
b. TV Connection
TV RGB
VIDEO S-VID EO DVI
TV RGB
VIDEO S-VID EO DVI
S-Video cable
S-Video to SCART cable
S-VIDEO
SCART
INPUT
Television
3. Connect a desktop or portable computer (discretional).
- Make sure to connect the other end of the RGB cable to
the VGA(RGB) output port of the computer.
- Press button to display image from VGA IN port of
AVerVision 300AF.
- For portable computer, make sure to switch your
computer to send signal to external output. Usually the
keyboard command is Fn+F5. If not, please check with
your computer handbook or contact the technical support
of your computer manufacturer.
VGAOUTVGAINDC12V
LIGHT
BOX
RGB Cable
Desktop Computer
Portable Computer
4. Basis Operation
z Press the zoom
and to
zoom in and zoom
out the image.
z Press to
adjust the focus
automatically.
z Press to
capture and save
the image in the
built-in memory.