Campbell Scientific CPEC200 Owner's manual

Campbell Scientific
Brand
Campbell Scientific
Model
CPEC200
Type
Owner's manual
CPEC200
Closed Path
Eddy Covariance System
Quick Deploy Guide
February 2016
1. Setup tripod and mount enclosures.
EC100 Enclosure
CPEC200 Enclosure
EC100 Enclosure
Pump Module
CPEC200 Enclosure
Pump Module
Optional Scrub
Module
Leg Mount
Mixed Mast and
Leg Mount
2. Ground tripod and enclosures.
Ground Lug
3. Setup tripod or mast with CM20X Crossarm.
Crossarm-To-Pole
Bracket
CM20X Crossarm
4. Mount the EC155 bypass tube.
EC155 bypass tube
Mounting clip
5. Mount gas analyzer and sonic anemometer.
EC155 Gas Analyzer
CM20X Crossarm
EC155 Boom
Adapter
Mounting
Platform
CSAT3A Sonic
Anemometer Head
Leveling Bubble
6. Connect EC155 and CSAT3A to EC100 Electronics.
EC155 Analyzer Cable
EC155 Sample Cell Cable
CSAT3A Cable
7. Connect system plumbing.
Zero Air Tubing
Analyzer Tubing
Pump Tubing
Pump Module Cable
CO
2
Span Gas
Tubing
8. Connect system wiring and insert compact flash (CF) card.
EC100 Power and SDM Cables
System Power Cable
(ensure +12 Vdc power
supply is off)
Insert CF Card
Power Cable
to EC100
EC100 SDM
Cable
Power Cable to +12Vdc
Power Supply (off)
SDM Cable to EC100
EC100
Power Cable
9. Turn on the +12 Vdc power supply and use the datalogger keyboard display to set settings and
initiate zero/span checks.
9.1 Press Esc to activate the display. Press Enter
to display the System Control Menu.
9.2 Select Configure System.
9.3 Select SONIC_AZIMU.
9.4 Enter the CSAT3A sonic head azimuth.
9.5 If the CPEC does not have a valve module,
skip to 9.10. Otherwise, select Zero/Span
Config.
9.6 Select CO2_SPAN_PPM.
9.7 Set CO2_SPAN_PPM to match the CO
2
concentration of the CO
2
span gas tank.
9.8 Select CHECK_ZERO, SET_ZERO,
CHECK_SPAN1, SET_SPAN1 in sequence.
Leave CHECK_SPAN2, CHECK_SPAN3,
and CHECK_SPAN4 as FALSE unless the
6-valve module is being used.
9.9 For each value selected on the previous
screen, change the setting from False to True
for auto zero/span.
9.10 Press ESC to exit.
Please visit www.campbellsci.com to obtain contact information for your local US or International representative.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

Campbell Scientific CPEC200 Owner's manual

Campbell Scientific
Brand
Campbell Scientific
Model
CPEC200
Type
Owner's manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents