Lexmark S510 Series Quick Reference Manual

Brand: Lexmark

Model: S510 Series

Category: Multifunctionals

Type: Quick Reference Manual

This manual is also suitable for

S515

S510 Series Quick Reference Guide

October 2012 www.lexmark.com

Important Message About Cartridge Recycling!

Please Read Before Opening Your Inkjet Cartridge Box

At Lexmark, we take our commitment to the environment seriously, and we encourage our customers

to participate in our easy, no-cost method for returning empty Lexmark cartridges to Lexmark for proper

recycling. We will insure that cartridges are properly handled with zero waste to landfills.

Go to www.lexmark.com/recycle. Follow instructions to

request postage-paid bags. Bags usually arrive within 7–10 days.

Place the empty Lexmark-branded inkjet cartridge(s) in the

postage-paid return bag, and then seal the bag. If you’re sending

single-color tanks, we recommend that you send at least two at

a time to maximize the environmental benefits.

Mail the bag to Lexmark’s recycling partner. The bag is pre-

addressed.

Visit www.lexmark.com/recycle to learn more about recycling.

Lexmark-branded cartridges are always made with all new parts, though components may contain

recycled material. For warranty returns, call 1-800-332-4120.

This patented printer is licensed for, and designed to work with, only genuine Lexmark inkjet cartridges

for the life of the patented printer. You agree to: (1) use only genuine Lexmark inkjet cartridges with this

printer except as otherwise provided below, and (2) pass this license/agreement to any subsequent user

of this printer. The patented Lexmark inkjet cartridges and their contents are licensed subject to a

restriction that they may be used only once. After this single use, the license to use the print cartridges

and their contents terminates, and you agree to return them only to Lexmark for recycling. Replacement

inkjet cartridge(s) sold without these terms are available through www.lexmark.com and may be refilled

by you, or a third party, as the only cartridge alternative to be used with the licensed printer.

Important safety information

Connect the power cord to a properly grounded electrical outlet that is near the product and easily

accessible.

Do not place or use this product near water or wet locations.

Use only the power supply and power cord provided with this product or the manufacturer's authorized

replacements.

CAUTION—POTENTIAL INJURY: To reduce risk of fire, use only the telecommunications (RJ‑11)

cord provided with this product or a UL Listed 26 AWG or larger replacement when connecting

this product to the public switched telephone network.

CAUTION—POTENTIAL INJURY: Do not cut, twist, bind, crush, or place heavy objects on the

power cord. Do not subject the power cord to abrasion or stress. Do not pinch the power cord

between objects such as furniture and walls. If any of these things happen, a risk of fire or

electrical shock results. Inspect the power cord regularly for signs of such problems. Remove the

power cord from the electrical outlet before inspecting it.

CAUTION—SHOCK HAZARD: Do not use the fax feature during a lightning storm. Do not set up

this product or make any electrical or cabling connections, such as the fax feature, power cord,

or telephone, during a lightning storm.

Contents

Important safety information.........................................................2

About your printer..........................................................................5

Finding information about the printer.................................................................................5

Minimizing your printer's environmental impact.................................................................5

Printer models......................................................................................................................5

Printer features....................................................................................................................6

Setting up the printer...........................................................................................................6

Understanding the parts of the printer..............................................................................13

Using the printer control panel..........................................................................................15

Using flash drives................................................................................................................16

Ordering and replacing ink cartridges............................................17

Ordering ink cartridges.......................................................................................................17

Replacing ink cartridges......................................................................................................17

Maintaining ink cartridges..................................................................................................18

Using shortcuts.............................................................................20

What are shortcuts?...........................................................................................................20

Getting started...................................................................................................................20

Using the printer software............................................................22

Supported operating systems.............................................................................................22

Installing the printer software............................................................................................22

Using the Windows printer software.................................................................................23

Using the Macintosh printer software...............................................................................23

Printing.........................................................................................25

Printing a document...........................................................................................................25

Printing on both sides of the paper (duplexing) automatically..........................................25

Printing photos from a flash drive......................................................................................26

Canceling print jobs............................................................................................................26

Copying.........................................................................................27

Tips for copying..................................................................................................................27

Making copies.....................................................................................................................27

Making a two‑sided (duplex) copy automatically...............................................................27

Canceling copy jobs............................................................................................................28

Scanning.......................................................................................29

Tips for scanning.................................................................................................................29

Scanning to a local computer.............................................................................................29

Scanning to a flash drive or memory card..........................................................................29

Scanning directly to e‑mail using the printer software......................................................29

Scanning to a PDF...............................................................................................................30

Canceling scan jobs.............................................................................................................30

E-mailing.......................................................................................31

Setting up the printer to e-mail..........................................................................................31

Sending e-mail....................................................................................................................31

Canceling an e‑mail............................................................................................................31

Setting up the printer to fax..........................................................32

Step 1: Connect the printer to the telephone line.............................................................32

Step 2: Check the dial tone.................................................................................................39

Step 3: Set your fax name and fax number........................................................................39

Step 4: Set the printer to receive faxes automatically or manually...................................39

Step 5: Set the number of rings..........................................................................................40

Step 6: Create a contact list................................................................................................40

Faxing...........................................................................................41

Sending faxes......................................................................................................................41

Receiving faxes...................................................................................................................41

Networking...................................................................................43

Wireless networking...........................................................................................................43

Ethernet networking..........................................................................................................45

Contents 3

Troubleshooting............................................................................46

Notices.........................................................................................56

Edition notice.....................................................................................................................56

Index............................................................................................57

Contents 4

About your printer

Finding information about the printer

The Quick Reference Guide contains instructions on adding your printer to a wireless network, setting up

a fax connection, and accomplishing common printer tasks like printing, copying, scanning, and faxing. It

also includes information on troubleshooting printer setup issues as well as solving basic networking and

faxing problems.

Note: Some functions are available only in select printer models.

For additional information, see the following:

What are you looking for? Find it here

Initial setup instructions

• Quick Setup Sheet

• Hardware Setup Wizard

Additional setup and instructions for using the

printer

User’s Guide

Help using the printer software Software Help installed automatically with the printer

software.

Click Help from any printer software program or

application.

The latest supplemental information, updates,

online customer support, and telephone

support

Support Web site—

http://support.lexmark.com

Available on the Software and Documentation CD.

Available on the Software and Documentation CD and on the Lexmark Support Web site at

http://support.lexmark.com.

Minimizing your printer's environmental impact

We are committed to protecting the environment and are continually improving our printers to reduce

their environmental impact. By selecting certain printer settings or tasks, you may be able to reduce your

printer's environmental impact even further.

Conserving energy

• Activate Eco-Mode. This feature sets the screen brightness to low and sets the printer to change to

Sleep mode after the printer is left idle for 10 minutes.

• Select the lowest Sleep timeout. The Sleep feature puts the printer in a minimum‑power standby

mode after the printer has been idle for a set amount of time (the Sleep timeout).

• Share your printer. Wireless/network printers allow you to share a single printer among multiple

computers, thus conserving energy and other resources.

Conserving paper

• Print more than one page image on one side of the paper. The Pages per Sheet feature allows you

to print multiple pages on one sheet. You can print up to 16 page images on one side of a sheet of

paper.

• Print on both sides of the paper. Duplexing lets you print on both sides of the paper manually or

automatically (depending on your printer model).

• Preview print jobs before printing. Use the preview features found in Toolbars, the Print or Print

Preview dialog, or the printer display (depending on your printer model).

• Use recycled paper.

• Reduce the margins of documents to be printed.

• Scan and save. To avoid printing multiple copies, you can scan documents or photographs and save

them to a computer program, application, or flash drive for presentation.

Conserving ink

• Use Quick Print or Draft Mode. These modes can be used to print documents using less ink than

normal and are ideal for printing documents that are mostly text.

• Use font types and font settings that requires less ink. Most programs or applications let you adjust

the darkness of the colors.

• Use high yield cartridges. Inks in high yield cartridges allow you to print more pages.

Recycling

• Return ink cartridges for reuse or recycling through the Lexmark Cartridge Collection Program. To

return an ink cartridge, go to www.lexmark.com/recycle. Follow the instructions to request a

postage‑paid bag.

• Recycle the product packaging.

• Recycle your old printer instead of throwing it away.

• Recycle paper from discarded print jobs.

• Use recycled paper.

To read the Lexmark Environmental Sustainability Report, see www.lexmark.com/environment.

Note: Your printer may not come with some of these programs or some of the functions of these

programs, depending on the features of the printer that you purchased.

Printer models

The installation software CD that came with your printer works for the following printer models:

• Lexmark S515

• Lexmark S519

About your printer 5

Printer features

Depending on the model, your printer comes with features that will help you manage and accomplish

printing and imaging tasks:

• Wireless or Ethernet networking—Print and scan from anywhere in your home or office over a secure

wireless or Ethernet network, as well as share the printer among multiple computers.

• Intuitive touch screen—Use the full‑featured color touch screen for fast, easy access to all the printer

menus. The large screen also allows you to view and print photos directly from your digital camera or

memory device without using a computer.

• Print—Print documents and PDFs quickly from a computer or from a USB flash drive. Built‑in two‑sided

printing lets you save money and the environment.

• Copy—Copy documents and photos with one‑touch, computer‑free black or color copying. Enjoy 25%

to 400% reduction and enlargement capacity.

• Scan—Scan documents and photos fast and easily with the high‑resolution scanner. Easily scan to a

memory device or to multiple laptops or computers over a secure wireless network with up to 1200 dpi

optical resolution.

• Fax—Do standalone black and color faxing at 33.6Kbps modem speed. Other fax features include 99

speed dials, automatic redial, junk fax blocking, and caller ID.

• Photo printing—Print high‑quality, long‑lasting photos directly from digital memory cards,

PictBridge‑enabled digital cameras, or USB flash drives.

• SmartSolutions—Simplify printer tasks that you frequently repeat by creating and customizing your

printer solutions. Using the SmartSolutions toolkit on the Web, you can choose the printer tasks that

you often perform, apply your custom settings, and download them to your printer as shortcuts that

you can easily access anytime. You can also customize your printer with solutions that display your

online calendars, online photo albums, RSS feeds, and more.

• Shortcuts—Save a set of frequently used printer settings available for a given task and then assign a

shortcut name and shortcut number to it. When you want to perform a task with those settings, you

can simply select the shortcut number on the printer instead of going through the usual process of

adjusting the settings and options.

• Eco‑Mode—Save energy by activating Eco‑Mode. It automatically dims the printer display light and

puts the printer into Sleep mode after a specified period of inactivity.

Setting up the printer

1 Unpack the printer.

xxxx xx

xxxxxxxx

xxxx xx xxxxx

xxxxxxxx

xxxx xx xxxxx

xxxxxxxx

xxxx xx

xxxxxxxx

Notes:

• Do not attach the USB cable until prompted to do so.

• Place the printer near the computer during setup. If you are setting up on a wireless network,

then you may move the printer after setup is complete.

• Contents may vary by model and region.

2 To initiate printer setup using a computer, insert the installation software CD, or download the printer

driver.

About your printer 6

With a CD or DVD drive (Windows/Macintosh) Without a CD or DVD drive or for Linux

Note: If the installation screen does not appear after a

minute, then see “Installation screen did not appear during

installation” on page 46.

Download the printer driver from

www.lexmark.com.

3 Remove tape and packing material from all areas of the printer.

4 Attach the paper support.

5 Open the printer.

About your printer 7

6 If necessary, replace the preinstalled language sheet with another one.

a Remove the preinstalled language sheet from the printer control panel.

xxxx xx

xxxxxxxx

xxxx xx xxxxx

xxxxxxxx

xxxx xx xxxxx

xxxxxxxx

xxxx xx

xxxxxxxx

b Insert the preferred language sheet into the language sheet holder, and then attach the language

sheet holder to the printer control panel.

Note: The language sheets are in the documentation folder that came with your printer.

7 Raise the printer control panel until it clicks into place.

8 Close the printer.

9 Open the paper feed guard.

About your printer 8

10 Use the paper guide adjustment lever to extend the paper guides.

11 Load paper.

Notes:

• Use the paper guide adjustment lever to adjust the paper guides.

• Do not load more than 100 sheets in the paper support.

12 Close the paper feed guard.

13 Extend the paper exit tray.

14 Connect the power cord only.

Note: Do not attach the USB cable yet.

About your printer 9

15 Make sure the printer is on.

16 Using the printer control panel, press the up or down arrow button until the language you want is

highlighted on the display, and then press

17 Confirm the language, and then press .

Language Selection

You have chosen English

as the language for your

Printer

Are you sure?

Yes

18 Set the country or region, and then press .

Country/Region

United States

Albania

Algeria

Please choose a country or region and press OK

19 Using the keypad on the printer control panel, set the date. Press the left or right arrow button to

scroll between the month, day, and year. Press

Note: The date format varies, depending on the selected country or region.

Set Date

Press OK when complete.

18 01 2011

About your printer 10

20 Set the time, and then press .

Set Time

Press OK when

complete.

05 55 AM

21 Set the time zone, and then press .

Time Zone

Please choose a time zone and press OK

(UTC-05:00) Eastern Time (USA/Ca..

(UTC-06:00) Central Time (USA/Ca...

(UTC-07:00) Mountain Time (USA/C...

22 To configure basic fax functions, press the left or right arrow button until Now is highlighted, and then

press

. Otherwise, go to step 25.

Fax Setup

Do you want

to set up fax now?

Now

Later

23 Enter your fax number for the printer, and then press . Your fax number identifies you as the sender

in all your sent faxes.

Fax Number

Enter Fax Number and press OK

24 Enter your name or company name, and then press . Your fax name identifies you as the sender

in all your sent faxes.

• To change a character, press the left arrow button.

• To add a space, press the number 0.

Fax Name

Enter Fax Name and press OK

25 Configure other advanced fax settings later in the software installation.

Continue

Configure Advanced Features

You can now print, but there are additional steps required to access all the

features of your device.

Configure Lexmark SmartSolutions and standalone email

Get my printer ready to send and receive faxes

What will I be missing if I don’t do this now?

How can I do this later?

Lexmark Pro910 Series Installation

Lexmark Pro4000 Series Installation

Get my printer ready to scan directly to my computer

Quit

About your printer 11

26 Open the printer.

Note: The printhead moves to the cartridge installation position.

27 Unpack the ink cartridges, and then remove the protective caps from the cartridges.

1 2 3

28 Insert each ink cartridge. Slide your finger along the ink cartridge until the cartridge clicks into place.

Notes:

• Insert the color cartridges first, and then the black cartridge.

• Insert the new ink cartridges immediately after removing the protective cap to avoid exposing

the ink to air.

29 Close the printer.

About your printer 12

30 Press to print an alignment page.

Notes:

• The alignment page prints.

• Do not remove the page until printing is finished. The alignment page may take a while to print

and will move in and out during the process.

• Streaks on the alignment page are normal and not an indication of a problem.

• The alignment page that prints may differ from the one shown.

• Recycle the alignment page.

Understanding the parts of the printer

Use the To

1 Automatic Document

Feeder (ADF)

Scan, copy, or fax multiple-page letter-, legal-, and A4-size documents.

2 Paper feed guard Prevent items from falling into the paper slot.

3 Paper guides Keep paper straight when feeding.

4 Paper support Load paper.

5 Paper guide adjustment

lever

Adjust the paper guides.

6 ADF exit tray Hold documents as they exit from the ADF.

7 ADF exit tray extension Catch legal‑size paper as it exits from the ADF.

About your printer 13

Use the To

8 ADF tray Load original documents into the ADF. This is recommended for

scanning, copying, or faxing multiple-page documents.

Note: Do not load postcards, photos, small items, or thin media (such

as magazine clippings) into the ADF. Place these items on the scanner

glass.

9 Printer control panel Operate the printer.

10 Paper exit tray Hold paper as it exits.

11 Tray extension Keep the paper in place as it exits.

12 PictBridge and USB port Connect a PictBridge-enabled digital camera, a USB Bluetooth adapter,

or a flash drive to the printer.

13 ADF paper guide Keep paper straight when feeding it into the ADF.

Note: Adjust the paper guide on the ADF tray to the width of the

original document.

Use the To

14 Scanner cover Access the scanner glass.

15 Scanner glass Scan or copy photos and documents.

Use the To

16 EXT port

Connect additional devices (telephone or answering machine) to the

printer and the telephone line. Use this port if you do not have a dedicated

fax line for the printer, and if this connection method is supported in your

country or region.

Note: Remove the plug to access the port.

17 USB port Connect the printer to a computer using a USB cable.

Warning—Potential Damage: Do not touch the USB port except when

plugging in or removing a USB cable or installation cable.

18 LINE port

Connect the printer to an active telephone line through a standard wall

jack (RJ‑11), DSL filter, or VoIP adapter, or any other adapter that allows

you to access the phone line to send and receive faxes.

19 Power supply with port Connect the printer to the power cord.

20 Ethernet port Connect your printer to a computer, a local network, an external DSL, or

a cable modem.

21 Duplex unit

• Print on both sides of a sheet of paper.

• Clear paper jams.

22 Printhead access area Install the printhead.

Note: The carrier moves to the printhead access area when no

printhead is installed in the printer.

23 Jam clearance cover Access and clear paper jams.

24 Ink cartridge access area Install, replace, or remove ink cartridges.

25 Scanner unit

• Access the ink cartridges and printhead.

• Clear paper jams.

About your printer 14

Using the printer control panel

Use To

1 Power

• Turn the printer on and off.

• Switch to Sleep mode.

Note: When the printer is on, press

to switch to Sleep mode. Press

and hold

for three seconds to turn off the printer.

2 Display

Note: The display is

turned off in Sleep

mode.

View:

• Printer status

• Messages

• Menus

3 Arrow buttons Navigate to menu or submenu items that appear on the display.

4 Home

Navigate from any level in the menu back to the home screen.

5 Keypad In Copy mode or Photo mode:

Enter the number of copies or prints you want to make.

In Fax mode:

• Enter fax numbers.

• Operate an automated answering system.

• Select letters when creating a Speed Dial list.

• Type numbers to enter or edit the date and time shown on the display.

6 Back

• Return to the previous screen.

• Exit from one menu level to a higher one.

7 Select

• Select menu options.

• Save settings.

8 Redial Display the last number dialed. Press the left or right arrow button to view the

last five numbers dialed.

9 Pause

Insert a three-second pause in a fax number to wait for an outside line or get

through an automated answering system. Enter a pause only when you have

already begun entering the number.

10 Dial tone

Dial the telephone number manually using the keypad before sending the fax.

11 Address Book

Access fax numbers from a saved list of numbers.

12 Color

Switch to color mode.

13 Black

Switch to black‑and‑white mode.

14 Start

Start a job, depending on which mode is selected.

About your printer 15

15 Cancel

• Cancel a print, copy, scan, or fax job in progress.

• Clear current settings or error messages, and return to previous settings.

16 Ethernet indicator

Check the Ethernet connection status of your printer and access the network

settings.

17 Wi‑Fi indicator

Check the wireless connection of your printer.

18 Eco‑Mode

• Change to Sleep mode after the printer is left idle for 10 minutes.

• Set screen brightness to low.

Using flash drives

Supported file types

• .jpg, .jpeg, .jpe (Joint Photographic Experts Group)

• .tiff, .tif (Tagged Image File Format)

Using a flash drive with the printer

Make sure the flash drive contains files that are supported by the printer. For more information, see

“Supported file types” on page 16.

1 Insert a flash drive into the USB port.

FLAS H

DRIVE

Notes:

• The flash drive uses the same port that is used for a PictBridge camera cable.

• An adapter may be necessary if your flash drive does not fit directly into the port.

Warning—Potential Damage: Do not touch any cables,

any network adapter, any connector, the memory

device, or the printer in the areas shown while actively

printing, reading, or writing from the memory device. A

loss of data can occur.

2 Follow the instructions or select from available options on the printer display.

Note: If the printer does not recognize the memory device, then remove and reinsert it.

About your printer 16

Ordering and replacing ink cartridges

Ordering ink cartridges

Lexmark S510 Series models (except Lexmark S519)

Item Return Program

cartridge

Regular cartridge

Black cartridge 150 Not Available

High‑yield black cartridge 150XL 150XLA

Yellow color cartridge 150 Not Available

High‑yield yellow color cartridge 150XL 150XLA

Cyan color cartridge 150 Not Available

High‑yield cyan color cartridge 150XL 150XLA

Magenta color cartridge 150 Not Available

High‑yield magenta color cartridge 150XL 150XLA

Licensed for a single use only. After use, return this cartridge to Lexmark for remanufacturing, refilling, or

recycling.

Available only on the Lexmark Web site at www.lexmark.com.

Lexmark S519 models

Item Return Program

cartridge

Regular cartridge

Black cartridge 160 Not available

High‑yield black cartridge 160XL 160XLA

Yellow color cartridge 160 Not available

High‑yield yellow color cartridge 160XL 160XLA

Cyan color cartridge 160 Not available

High‑yield cyan color cartridge 160XL 160XLA

Magenta color cartridge 160 Not available

High‑yield magenta color cartridge 160XL 160XLA

Licensed for a single use only. After use, return this cartridge to Lexmark for remanufacturing, refilling, or

recycling.

Available only on the Lexmark Web site at www.lexmark.com.

Notes:

• To get more ink, order high‑yield ink cartridges.

• Depending on your country or region, you may get the ink cartridges individually or in multiple

packs.

• You can order a mix of standard ink cartridges and high‑yield ink cartridges, depending on your

needs.

• For page yield information, visit www.lexmark.com/yields.

• The cartridges used for printing documents can also be used for printing photos.

• For best results, use only genuine Lexmark ink cartridges.

Replacing ink cartridges

Make sure you have a new ink cartridge or cartridges before you begin. You must install new cartridges

immediately after removing the old ones, or the ink remaining in the printhead nozzles may dry out.

Removing ink cartridges

1 Turn on your printer.

2 Open the printer.

Note: The printhead moves to the cartridge installation position.

Ordering and replacing ink cartridges 17

3 Press the release tab, and then remove the used ink cartridge or cartridges.

Installing ink cartridges

1 Remove the ink cartridge from the pack, and then remove the protective cap from the ink cartridge.

If your ink cartridge comes with a twist cap, then remove the cap.

1 2 3

2 Insert each ink cartridge. Slide your finger along the ink cartridge until the cartridge clicks into place.

Notes:

• Insert the color cartridges first, and then the black cartridge.

• Insert the new ink cartridges immediately after removing the protective cap to avoid exposing

the ink to air.

3 Close the printer.

Maintaining ink cartridges

In addition to the following tasks that you can perform, your printer performs an automatic maintenance

cycle every week if it is plugged into an electrical outlet. It will briefly come out of Sleep mode or will

temporarily power on if it is turned off.

Aligning the printhead

If the characters or lines on your printed image appear jagged or wavy, then you may need to align the

printhead.

1 Load plain paper.

2 From the printer control panel, navigate to:

> Setup > >Maintenance > > Align Printer >

An alignment page prints.

Note: Do not remove the alignment page until printing is finished.

Ordering and replacing ink cartridges 18

If you aligned the cartridges to improve print quality, then print your document again. If print quality has

not improved, then clean the printhead nozzles.

Cleaning the printhead nozzles

If you have not been using the printer for a long period, then you may need to clean the printhead nozzles

to improve the quality of your prints. Keep your printer plugged to a properly grounded, working electrical

outlet to allow it to perform automatic maintenance cycles.

Notes:

• Cleaning the printhead nozzles uses ink, so clean them only when necessary.

• Deep cleaning uses more ink, so try the Clean Printhead option first to save ink.

• If the ink levels are too low, you must replace the ink cartridges before you can clean the printhead

nozzles.

1 Load paper.

2 From the printer control panel, navigate to:

> Setup > > Maintenance >

3 Press the up or down arrow button to scroll to Clean Printhead or Deep Clean

Printhead, and then press

A cleaning page prints.

Ordering and replacing ink cartridges 19

Using shortcuts

What are shortcuts?

A shortcut is a way to quickly accomplish printing, copying, scanning, e‑mailing, or faxing tasks with the

printer. You can configure and save a set of frequently used printer settings available for a given task and

then assign a shortcut name and shortcut number to it. When you want to perform a task with those

settings, you can simply select the shortcut number on the printer instead of going through the usual

process of adjusting the settings and options.

Configure the shortcut settings for a task in the printer Web page:

Choose To

Copy Copy a document or photo.

Eco‑Copy Copy a document or photo using two‑sided or draft setting.

ID Card Copy Copy both sides of an ID card onto a single page.

Scan to Fax Scan a document or photo and send it through fax.

Scan to E‑mail Scan a document or photo and send it through e‑mail.

Note: Make sure the printer is connected to the network and the

Internet through an Ethernet or wireless connection.

Scan to Computer Scan a document or photo and send it to your computer.

Notes:

• Make sure the printer driver is installed with a network printer

connection.

• Make sure the printer is connected to the computer, either locally

(USB) or through the same Ethernet or wireless network.

Scan to Network Scan a document or photo and save it to a network folder.

Note: Make sure the printer is connected to the Internet through an

Ethernet or wireless connection.

Scan to Memory Device Scan a document or photo and save it to a memory card or flash drive

(depending on your printer model).

Print a File Print a document from your computer.

Note: Make sure the printer is connected to the computer through

the same Ethernet or wireless network.

Example:

A lawyer who uses his printer to send e‑mails to clients normally navigates through the printer control

panel to select the feature and its available options. Instead of doing that, he can configure the printer

settings (such as the message title and recipient) from the printer Web page, and then assign a shortcut

number to the task. When he enters the shortcut number on the printer control panel, the printer

automatically sends the documents according to the selected settings. If he wants to send another copy

of the message, he simply enters the shortcut number again.

Getting started

During installation, a link will be provided for you to create shortcuts. If you were not able to create your

shortcuts during installation, then you may create the shortcuts through your printer software.

Launching the shortcuts page using the printer software

Before you begin, make sure:

• Your printer and computer are each connected to the network through an Ethernet or wireless

connection.

• Your printer is turned on.

For Windows users

Click or Start.

2 Click All Programs or Programs, and then select the printer program folder from the list.

3 Navigate to:

Printer Home > select your printer > Settings > Configure Shortcuts

For Macintosh users

From the Finder, navigate to:

Applications > select your printer folder > Shortcuts

2 Select your printer from the list, and then click Launch.

Creating a shortcut

1 Launch the shortcuts page, and then navigate to:

Add New Shortcut > select a task

2 Assign a shortcut number and shortcut name, and then specify the settings.

Notes:

• You can assign shortcut numbers from 1 to 999.

• If you configured the shortcut to show the settings before running, then the settings will

appear on the printer display. Adjust the settings if necessary.

3 Click Add.

Using shortcuts 20

Page is loading ...

Lexmark S510 Series Quick Reference Manual

Brand: Lexmark

Model: S510 Series

Category: Multifunctionals

Type: Quick Reference Manual

This manual is also suitable for

S515

Download PDF

report

Lexmark S510 Series Quick Reference Manual

This manual is also suitable for

Lexmark S510 Series Quick Reference Manual

Related papers

Other documents