For Mac system recognize IsoDrive 100/300/410
1. Prepare IsoDrive series and Mac system
2. If Mac system cannot recognize the external drive, please plug in two USB as below
to boot up the external drive
3.
4. After plug in, it will display a icon “untitled 1” on desktop
5. Go to right hand corner, click “Macintosh HD” → “Utilities” → “Disk Utility” , and
run this software
6. Point to external harddisk
7. go to “partition”, choose format as “MS-DOS file System”
8. Go to “Erase”, choose volume format as “MS-DOS File System”
9. After choose Volume Format, click “Erase” button, it will pop-up a menu as below
photo, choose “Erase”
10. After the partitioning bar finish, it can read and write on Mac and PC system
-
1
-
2
-
3
-
4
-
5
Astone ISODRIVE 300 Reference guide
- Type
- Reference guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI