Audio Dimension PM12 User manual

Brand
Audio Dimension
Model
PM12
Category
Projector mounts
Type
User manual

Audio Dimension PM12 is a versatile projector ceiling mount that provides a secure and flexible way to mount your projector to the ceiling.

With its adjustable design and sturdy construction, the PM12 can accommodate a wide range of projectors and ceiling types. The mount features a swivel, rotate, and tilt function, allowing you to easily position your projector for optimal viewing.

The PM12 comes with all the necessary hardware for installation, including screws, bolts, and a cable clip. It also includes rubber spacers that can be used to ensure a snug fit between the mount and your projector.

Audio Dimension PM12 is a versatile projector ceiling mount that provides a secure and flexible way to mount your projector to the ceiling.

With its adjustable design and sturdy construction, the PM12 can accommodate a wide range of projectors and ceiling types. The mount features a swivel, rotate, and tilt function, allowing you to easily position your projector for optimal viewing.

The PM12 comes with all the necessary hardware for installation, including screws, bolts, and a cable clip. It also includes rubber spacers that can be used to ensure a snug fit between the mount and your projector.

PM12 Projector Ceiling Mount
Part List
Depending on your mount model - The top mounting plate may need to be
assembled to the adjustment pole.
*Use the small hex key and the 4 flat head screws.
© AudioDimension.com.au. All
product, product specifications
and data are subject to change
without notice to improve
reliability, function,design or
otherwise. Engineered in Australia.
Made in China.
Assembly Instructions
Remove the thumb bolt to seperate the base plate fron the mounting plate.
1
2
This is the most important step - Using the large hex key, tighten the main bolt very
tightly.
Note: The longer option mounts include a cable clip.
Make sure the adjustment knob stays loose even after the main bolt is tight. If the
adjustment knob is tight, loosen it and retighten the main bold. Continue this
process until you can not tighten the main bolt any more. The adjustment knob
needs to remain loose so that the base plate can swivel, rotate and tilt.
Prepare the top plate to be mounted on the ceiling. Fasteners for certain types of
ceiling are supplied, but the proper fastener for your particular ceiling may not be
suplied. It is important that the correct type of fasterner by used. A local professional
can help you determine the proper fasterner for your ceiling.
Place the mount top plate on the ceiling and mark the holes with a pencil. Then,
attach it to the ceiling with the proper fasterners.
Prepare the base plate for our projector.
Reattach the base plate to the top mounting plate using the thumb bolt.
For the nal step, lock the projector in place by turning the adjustment knob until it
is tight.
3
4
6
7
Projector fasteners vary in size and length. Provided with the mount are the most
frequently used fasteners. If the fasteners provided do not t your projector, research
the correct type of fastener in your projector manual and purchase them at your
local hardware store.
Included are rubber spacers that may or may not be needed to attach the legs to
your projector.
It is very important to use the partially threaded screws and the plastic washer to
attach the legs to the base plate. The fully threaded screws are for extending the
legs.
The assembly goes as follows: baseplate- plastic washer - leg - partially threaded
screw
There are many dierent ways to use the parts to accommodate dierent size
projectors.
Attach all legs.
Attach the base plate to your projector after preparing it.
5
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Audio Dimension PM12 User manual

Brand
Audio Dimension
Model
PM12
Category
Projector mounts
Type
User manual

Audio Dimension PM12 is a versatile projector ceiling mount that provides a secure and flexible way to mount your projector to the ceiling.

With its adjustable design and sturdy construction, the PM12 can accommodate a wide range of projectors and ceiling types. The mount features a swivel, rotate, and tilt function, allowing you to easily position your projector for optimal viewing.

The PM12 comes with all the necessary hardware for installation, including screws, bolts, and a cable clip. It also includes rubber spacers that can be used to ensure a snug fit between the mount and your projector.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents