14
PLAYBACK
Loading and playing a disc:
1. After connecting power to the unit or charging the battery, put the power switch in the ON
position.
2. Push the OPEN button on the DVD player to open the disc tray’s lid.
3. Place a disc in the DVD player with the label side facing up.
4. Close the lid to the disc tray.
5. The unit will load the disc.
6. Press the play button to begin playback.
MP3 disc playback:
1. After you have added an MP3 disc to the unit – as per the directions above – a menu will
be displayed on the screen showing the discs contents.
2. Use the directional arrow keys on the remote control to select and file or folder.
3. Press the ENTER button to enter the selected folder. The files/folder will be listed.
4. Use the directional arrow keys to make a selection. Press the ENTER button to begin
playback of a selected folder.
Kodak picture CD playback:
1. After you have added the KODAK picture CD to the unit – as per the directions above –
press the STOP button to display the menu showing the contents of the disc. In the
menu, use the directional arrow keys to select a picture and press ENTER to start
playback from the selected picture.
GOTO: Press this button and then use the numerical digit buttons on the remote control to
select a picture, then the playback will begin from that selected picture.
PLAY/PAUSE: Press the PLAY button to begin playback. Press the PAUSE button to pause
the playback, press it again to resume the playback.
REPEAT: Press the REPEAT button on the remote control repeatedly to switch between the
different repeat modes (single, repeat one, repeat folder, folder, cancel repeat).
FAST REWIND AND FAST FORWARD: Press these buttons on the remote control to skip to
the previous or next picture during playback.
LEFT/RIGHT ARROW DIRECTIONAL BUTTONS: Press these buttons on the remote control
to rotate the picture clockwise/anti clockwise during the playback.
ZOOM: Press this button on the remote control to zoom in or out or the picture.
USB flash stick and SD card playback:
1. Insert a USB flash drive to the USB port. Press the USB/SD button on the remote control
to select USB mode to playback the readable files from the flash stick.
Or
2. Insert a SD card into the SD card slot. USB/SD button on the remote control to select
MCR mode to playback the readable files from the SD card.
The max size capacity of USB flash stick and SD card this DVD player can playback from is
8GB.