Thermaltake Toughpower 1500W User manual

Toughpower 1500W Toughpower 1500W

www.thermaltake.com

User's Manual

Benutzerhandbuch

Mode d’emploi

Manual del usuario

Manuale dell’utente

Manual do Utilizador

Εγχειρίδιο Χρήσης

安裝說明書

用戶手冊

ユーザーズマニュアル

Руководство пользователя

kullanıcı elkitabı

(EEE Yönetmeliğine Uygundur)

คู่มือการใช้

11

1500W

Toughpower

TM

High Quality, Per formance, Quiet

TP-1500M_Toughpower 1500W_Manual

110610

A

Poki

56

四色

Toughpower 1500W Toughpower 1500W

Table of contents

1. Warnings & Caution

2. Components Check

3. Power Connector Introduction

4. Installation Steps

5. Product Features

6. Output Specification

7. Environments

8. EMI & SAFETY

9. Trouble Shooting

01

02

03

Toughpower 1500W Toughpower 1500W

1. Do not unplug the AC power cord when the power supply is in use. Doing so may

cause damage to your components.

2. Do not place the power supply in a high humidity and/or temperature environment.

3. High voltages exist in the power supply. Do not open the power supply case

unless you are an authorized service technician or electrician. Doing so will void

the warranty.

4. PSU should be powered by the source indicated on the rating label.

5. Please use only genuine Thermaltake modular cables with Thermaltake

Toughpower 1500W Cable Management power supply models. Third party cables

might not be compatible and could cause serious damage to your system and

power supply. The warranty is voided with the use of third party cables.

6. All warrantees and guarantees will be voided, if failure to comply with any of the

warnings and cautions covered in this manual.

1. Warnings and Caution

2. Components Check

- Toughpower 1500W power supply unit - AC power cord

- Modular cable set - Mounting screws x 4

- User manual - Cable straps x 4

3. Power Connector Introduction

ATX Cable (24-pin)

EPS12V CPU Cable (8-pin)

ATX/EPS 12V CPU Cable (4+4pin)

PCI-E Cable (6+2pin)

SATA Cable (5pin)

Peripheral Cable (4pin)

Peripheral Cable to Floppy 4pin adapter

1

8

12

8

1

600mm

550mm

100mm

1

6

3

2

1

Type

QTY

Length

Cable

4. Installation Steps

Note: Make sure that your system is turned off and unplugged. Disconnect the AC power

cord from your old power supply.

1. Install the PSU into the case with the four screws provided.

2. Connect the 24-pin Main Power Connector to your motherboard.

3. For motherboard that only requires a 4pin ATX 12V (CPU) connector, please detach a

4pin connector from the 4+4pin ATX 12V connector and connect it to the motherboard.

(Either one of the 4pin from the 4+4pin ATX 12V connector will work)

4. Connect the modular cables from the cables accessories pack to the socket on the power

supply as needed

5. Connect the SATA devices (if applicable) to the power supply using the SATA cables

provided. ie; hard drives, CD/DVD drives

6. Connect any devices that may use the 4 pin peripheral connectors. ie; hard drives,

CD/DVD drives or case fans.

7. If your graphic card requires PCI-E power connector, please connect corresponding PCI-

E connector instructed by your graphic card’s user manual. Please note the power

supply utilizes a unique 6+2pin PCI-E connector that can be effectively used as a single

8pin or 6pin PCI-E connector. To use it as a 6pin PCI-E connector, please detach the

2pin connector from the 6+2pin connector.

DO NOT PLUG THE PCI-E CABLE INTO THE CPU POWER CONNECTION.THIS WILL

DAMAGE YOUR SYSTEM.

8. Connect the AC power cord to the power supply AC inlet and turn the switch to “I” position

5. Product Features

- Compliance with Intel ATX 12V 2.3 & SSI EPS 12V 2.92 standards.

- 24 / 7 @ 40℃: Guaranteed to deliver 1500W continuous power.

- 80 PLUS Silver certified – with 87-91% efficiency @ 20-100% load under real world load

conditions.

- Double-forward switching circuitry offers low power loss and high reliability.

- Robust and dedicated quad +12V rails(30A for 12V1 & 12V2, 50A for 12V3 & 12V4) design

provides superior performance under all types of system loading.

- High quality Japanese capacitors: ensure superb performance and reliability.

- Solid state capacitors: great stability at higher operating temperatures, frequencies and

currents.

- Universal AC input 100V~240V automatically scans and detects the correct voltage.

- Multi-GPU ready: 8 x PCI-E connectors support up to 4-way ATI CrossFireX™ 及Nvidia SLI™.

- Designed to support latest Intel/AMD multi -core CPUs.

- Active PFC with PF value 0.99 - less harmonic pollution, greater efficiency.

- Ultra-silent operation with intelligent 13.5cm cooling fan speed control.

- Dimension: 150mm(W)x86mm(H)x220mm(L).

- High reliability: MTBF>120,000 hours.

- Built in industrial-grade protections: over current, over voltage, under voltage, over power,

over temperature and Short-Circuit protections.

- Safety / EMI : UL/CUL, CE, FCC, CB+Baurt mark, GOST and BSMI certified.

0201

Toughpower 1500W Toughpower 1500W

7. Environments

Operating temperature

Operating humidity

MTBF

0℃ to +40℃

10% to 90%,non-condensing

120,000 hrs minimum

9. Trouble-Shooting

If the power supply fails to function properly, please follow the troubleshooting guide

before application for service:

1. Is the power cord plugged properly into electrical outlet and into the power supply AC

inlet?

2. Please make sure the “I/O” switch on the power supply is switched to “I” position.

3. Please make sure all power connectors are properly connected to all the devices.

4. Please turn-off and turn-on the power supply with the I/O switch few times with about

0.5 second in the OFF state to reset the PSU.

5. If connected to a UPS unit, is the UPS on and plugged in?

If the power supply is still unable to function properly after following the above

instruction, please contact your local store or Thermaltake branch office for after sales

service. You may also refer to Thermaltake’s website for more technical support:

www.thermaltake.c om

Inhaltsverzeichnis

01. Warnungen und Vorsichtshinweis

02. Komponentenüberprüfung

03. Vorstellung der Anschlüsse

04. Installationsschritte

05. Leistungsmerkmale des Produkts

06. Ausgangsspezifikation

08. EMI & SICHERHEIT

07. Betriebsumgebung

09. Problembeseitigung

01

02

03

6. Output Specification

DC OUTPUT

Max Output Current

Max Output Power

Continuous Power

Input Voltage: 100V~240V

Input Current: 18A - 9A

Frequency: 60Hz ~ 50Hz

~

AC INPUT

+3.3V

+12V1

+5V

+12V2

40A 40A 30A 30A 50A 50A

280W 1320W

1500W

-12V

+5VSB

0.5A 6.0A

6.0W 30W

+12V3

+12V4

8. EMI & SAFETY

UL/CUL, CE, FCC, CB+Baurt mark,

GOST and BSMI certified.

TP-1500M Toughpower 1500W

EMI Regulatory & SAFETY Standards

Page is loading ...

Thermaltake Toughpower 1500W User manual

This manual is also suitable for

Thermaltake Toughpower 1500W User manual

in other languages

Related papers

Other documents