Brennenstuhl Primera-Line Operating instructions

Hugo Brennenstuhl

GmbH & Co. KG

Seestraße 1–3

72074 Tübingen

Germany

Bedienungsanleitung

Überspannungsschutzadapter

DE

Operating instructions

Overvoltage protection adaptor

GB

Manual de instrucciones

Adaptador de protección contra

sobretensión

ES

Gebruiksaanwijzing

Overspanningsbeveiligings-

adapter

NL

Bruksanvisning

Överspänningsskyddsadapter

SE

0416862

Page is loading ...

ENGLISH

10

TABLE OF CONTENTS

Introduction ...................................................10

Scope of supply ............................................ 11

Safety instructions ....................................... 11

For your safety ......................................... 11

Intended use ............................................ 12

Product overview.......................................... 13

Structure ................................................... 13

Functionality ............................................. 13

Technical data ............................................... 14

Operation .......................................................15

Connection ............................................... 15

Maintenance and cleaning ........................... 16

Disposal......................................................... 17

Warranty and Service ................................... 17

Declaration of conformity ............................18

INTRODUCTION

Please read the operating instructions carefully.

Keep the operating instructions and give them

to the user of the overvoltage protection adap-

tor. Before using the overvoltage protection

adaptor read and observe the safety instruc-

tions contained in the operating instructions.

For questions on spare parts or repairs please

contact the manufacturer.

ENGLISH

11

SCOPE OF SUPPLY

1 overvoltage protection adaptor

1 operating instruction

SAFETY INSTRUCTIONS

Please observe the following safety instruc-

tions. Failure to comply can result in personal

injury and damage. Damages caused by failure

to comply with the operating instructions, espe-

cially the safety and handling instructions, void

the warranty. The manufacturer is not responsi-

ble for any subsequent damage.

FOR YOUR SAFETY

DANGER

Danger to life from electric shock

Do not touch damaged, open or energised

parts. Danger of electric shock.

Check the overvoltage protection adaptor

for damages before use. Use the over-

voltage protection adaptor only if it is not

damaged.



•

ENGLISH

12

CAUTION

Devices switching on accidentally

When inserting the overvoltage protection

adaptor, the connected devices might ac-

cidentally switch on.

Make sure you disconnect all the con-

nected devices before switching on or off

the overvoltage protection adaptor.



Do not manipulate or alter the overvoltage

protection adaptor.

Repairs should be performed by a skilled

technician only.

Keep the overvoltage protection adaptor

away from children.

INTENDED USE

The overvoltage protection adaptor can be used

only as an overvoltage protection for termi-

nals (type SPD 3) with a 230V power supply

(connected to a socket with a professionally

installed protective conductor). Any other use is

not permitted.

The overvoltage protection adaptor must not be

covered when it is in operating status.

It should be used in dry rooms, only for private

purposes.

•

ENGLISH

13

PRODUCT OVERVIEW

STRUCTURE

The legend refers to the product photos on the

cover inner side.

SP-230V-4500 model

SP-RJ11-4500 model

SP-RJ45-4500 model

SP-Koax-4500 model

Green signal lamp

FUNCTIONALITY

The overvoltage protection adaptor prevents

that terminals connected with the socket

(type SPD 3) are damaged by voltage peaks in

a 230V network. Voltage peaks can arise from

indirect lightning or inductive loads activation,

such as engines, ovens or lamps.

For a correct operation the device should be

connected to a socket with a professionally

installed protective conductor.

When the green signal lamp 5 on the overvolt-

age protection adaptor is lit, the overvoltage

protection is active.

When the green signal lamp 5 on the overvolt-

age protection adaptor is no longer lit, protec-

tion is no longer ensured and the overvoltage

protection adaptor must be replaced.

1

2

3

4

5

ENGLISH

14

TECHNICAL DATA

Name: Overvoltage protection adaptor

Supply voltage: 230 V~ / 50 Hz

Max. current-carrying capacity: 16 A

SPD according to EN 61643-11:2002: Type 3

Highest continuous voltage U

C

:250 V~ / 50 Hz

Combined surge U

OC

(L-N): 6 kV

Combined surge U

OC

(L/N-PE): 6 kV

Protection level U

p

(L-N): 1.0 kV

Protection level U

p

(L-/N-PE): 1.5 kV

Models:

Item number: 1506950 (Model 1 )

Equipment: 230V socket

Item number: 1506920 (Model 2 )

Equipment: 230V socket + connections for

analog telecommunication devices (RJ11)

Item number: 1506930 (Model 3 )

Equipment: 230V socket + connections for

ISDN (DSL) telecommunication devices (RJ45)

Item number: 1506940 (Model 4 )

Equipment: 230V socket + connections for

devices with (coaxial) antenna pick-up

ENGLISH

15

OPERATION

CONNECTION

CAUTION

Damages due to unsuitable power supply

Risk of damages to the overvoltage protec-

tion adaptor by too high mains voltage.

Check the overvoltage protection adaptor

for allowed mains voltage on identi ca-

tion plate.

Connect the overvoltage protection adap-

tor exclusively to a socket with a profes-

sionally installed protective conductor.

Operate only one overvoltage protection

adaptor at a time, do not connect several

adaptors one after another.



Overvoltage protection adaptor standard

function

Connect the overvoltage protection adaptor

1 – 4 to the appropriate socket.

The green signal lamp 5 is lit:

Connect the terminal plug to the over-

voltage protection adaptor 1 – 4 socket.

The green signal lamp 5 is not lit:

Replace defective overvoltage protection

adaptor 1 – 4 .

1.



ENGLISH

16

Overvoltage protection adaptor additional

function

Carry out the operations provided in

"Overvoltage protection adaptor standard

function".

Insert the connector of the corresponding

input cable in one of the two bushes on the

lower side of the overvoltage protection

adaptor 2 – 4 .

Connect cable connection of the corre-

sponding terminal to the other bush on the

lower side of the overvoltage protection

adaptor 2 – 4 .

MAINTENANCE AND CLEANING

The overvoltage protection adaptor is mainte-

nance-free.

DANGER

Danger to life from electric shock

Do not touch damaged, open or energised

parts. Danger of electric shock.

Unplug the overvoltage protection adap-

tor from socket before cleaning.

Never dip the overvoltage protection

adaptor in water.



Clean the overvoltage protection adaptor

with a dry cloth.

1.

2.

3.

1.

ENGLISH

17

DISPOSAL

Do not dispose of electrical

appliances together with household

waste!

According to the European Directive

2002/96/EC on waste electrical and

electronic equipment, used electric equipment

should be disposed of separately and envi-

ronmentally-friendly recycled. For information

about the disposal of old equipment please

contact your local authority.

WARRANTY AND SERVICE

Warranty

This equipment comes with a warranty of

2 years from the date of purchase. Please keep

the receipt as proof of purchase. The equipment

has been carefully manufactured and tested be-

fore the delivery. The warranty covers material

and manufacturing faults only if the device has

been used properly. In case of unauthorised

interference the warranty is void. Your statutory

rights are not affected by this warranty. In case

of a warranty claim, please call our hotline. This

is the only way to ensure the shipment of the

equipment is free of charge.

ENGLISH

18

Connected devices warranty

Brennenstuhl takes charge of repairing or

replacing all devices damaged by overvoltage,

only on condition that the limits shown on pack-

aging are not exceeded and that overvoltage

was not caused by mechanical damages. As far

as our product responsibility is concerned, an

insurance protection is therefore provided for

people and objects up to 5 millions euro.

Service address

H. Brennenstuhl GmbH u. Co. KG

Seestrasse 1-3

72074 Tübingen, Germany

e-mail: [email protected]

Service Tel.: +49 (0) 18 05 – 72 07 4-1

(14 cents/min. from the German  xed network)

DECLARATION OF CONFORMITY

The CE mark has been af xed in compliance

with the following European directives:

2006/95/EC Low voltage directive

2004/108/EC EMC Directive

The declaration of conformity is deposited at

the manufacturer.

Manufacturer:

H. Brennenstuhl GmbH u. Co. KG

Seestrasse 1-3, 72074 Tübingen

•

Page is loading ...

Brennenstuhl Primera-Line Operating instructions

This manual is also suitable for

Brennenstuhl Primera-Line Operating instructions

in other languages

Related papers

Other documents