Klipsch R-26FA Owner's manual

Category
Loudspeakers
Type
Owner's manual

This manual is also suitable for

REFERENCE (n):
1) the standard, the benchmark, the point used for
comparison
2) the embodiment of the legendary
Klipsch sound
LOUD AND PROUD SINCE 1946
In 1946, Paul W. Klipsch revolutionized the audio
industry by creating our proprietary horn technology
and the acoustic principles that are the driving force
behind our highly acclaimed signature sound.
Today, we remain true to PWKs vision and pack the
better part of a century’s worth of sweat and genius
into every product we make. These speakers are the
result of our obsession with that aural perfection.
Experience the power, detail and emotion of Klipsch
Reference. We are the Keepers of the Sound
®
.
ENGLISH
BEFORE YOU START
Some Klipsch
®
speakers have feet and
other accessories that may need to be
installed prior to use. Please refer to
Diagrams 1, 2 and 3 for installation.
DIAGRAM 1
MONITOR SPEAKERS
DIAGRAM 2
CENTER CHANNEL
DIAGRAM 3
SURROUND SPEAKERS
Rubber Feet
Rubber Feet
Domed Feet
Place on bottom
or back (if wall mounted)
ROOM PLACEMENT CONNECTION
Left and Right Main Channel Speakers — For optimum
performance, Klipsch Group, Inc. (KGI) suggests placing your
speakers 6 to 15 feet (1.8 to 4.6m) apart. They may also be toed-in
slightly for better stereo imaging. The listening position should be
about 1 to 1.5 times the distance separating the speakers. Refer to
Figures 1 and 3 for connection and placement.
Center Channel Speakers — Center channel speakers are designed to
place dialogue and primary sounds so that they appear to come from
the video screen. The speakers should therefore be placed as close
to the screen as possible, preferably directly on top of or below the
screen. Refer to Figures 1, 2 and 3 for connection and placement.
Rear Surround Channel Speakers — Klipsch WDST surround speakers
should be placed approximately 2 feet above the listening position.
Typically this will be about 5-7 feet above the floor. The surrounds
should be placed on the walls directly adjacent to the listening position.
Another option would be on the wall behind the listening position.
The final surround speaker placement depends on your rooms
characteristics. They are designed to recreate the sense of space and
ambience that many of today’s surround sound technologies provide.
Refer to Figures 1, 3 and 4 for connection and placement.
Please note that surround grilles are fixed and cannot be removed.
Conventional Connection — Using 16-12 gauge speaker wire, connect
the RED “positive” (+) terminal of the LEFT speaker to the RED
“positive” (+) terminal of your amplifier’s LEFT channel. Connect the
BLACK “negative” (–) terminal of the LEFT speaker to the BLACK
“negative” (–) terminal of your amplifier’s LEFT channel. Repeat this
procedure for connecting all remaining speakers to the appropriate
amplifier channels. Refer to Figure 3. Make sure that no bare wires
from any of the connections touch any other terminals as this could
cause a short and damage your equipment.
Some Klipsch Reference speakers come with dual binding posts that
are connected by a metal strip. Do not remove this strip or your
speakers will not function correctly. Keep this strip in place and
connect your speaker wire to the top set of the binding posts. It is
possible to “Bi-wire” a speaker that has two sets of binding posts.
Please see your receiver’s manual for further instructions.
Amplifier RequirementsKlipsch speakers are highly efficient and
will operate easily on a wide variety of amplifiers. All Klipsch speakers
are 8-ohm compatible and can be driven to very high levels with low
distortion. Due to the high output levels Klipsch speakers are capable
of reproducing, exercise caution with the volume control. Excessive
volume over long periods can permanently damage your hearing.
Overdriving your amplifier could also damage your speakers. Check with
your dealer or amplifier manual to make sure your particular amplifier
is best suited to your application. We want you listening for a lifetime.
FIGURE 1
SPEAKER PLACEMENT IN LISTENING AREA
FIGURE 2
CENTER CHANNEL
FIGURE 4
WALL MOUNTING SURROUND SPEAKERS
FIGURE 3
STANDARD CONNECTIONS
S
S
TV
C
L R
X
Y
Z
SL
SR
SL
SR
X=Y=Z
Front Right Front Left
S
S
TV
C
L
R
X
Y
Z
SL
SR
SL
SR
X=Y=Z
Front Right Front Left
S
S
TV
C
L R
X
Y
Z
SL
SR
SL
SR
X=Y=Z
Front Right Front Left
S
S
TV
C
L R
X
Y
Z
SL
SR
SL
SR
X=Y=Z
Front Right Front Left
S
S
TV
C
L R
X
Y
Z
SL
SR
SL
SR
X=Y=Z
Front Right Front Left
6’ - 15’
Sub Sub
Optional Side Surround
Placement
(Option A is preferred)
#10 or #12
2.5" - 3" panhead wood screws
Mount in wall stud or use anchors -
leave 1/4" exposed
CAUTION!
Do not use keyhole
for ceiling mounting!
Below
Above
OR
OR
The only thing you should ever need to do to your speakers is dust
them occasionally. Never apply any abrasive or solvent-based cleaner
or any harsh detergent. You can clean the grilles with the brush
attachment of a vacuum cleaner.
CARE AND CLEANING
Register your product online at www.klipsch.com/register
• Keep up-to-date on new products and promotions.
• Your personal information will never be resold.
• This registration information is not used for warranty purposes.
Please retain your receipt for warranty claims.
PRODUCT REGISTRATION
TV
SBL
SL SR
L
R
C
SUB SUB
SBR
3
0
º
1
2
0
º
-
1
5
0
º
9
0
º
-
1
2
0
º
SBRSBLRL
1
2
3
1
3
2 2
3
1
SL SR
R-26FA R-14SA R-14SA
R-14SAR-26FA
REFERENCE AVEC LA TECHNOLOGIE DOLBY ATMOS
®
POSITIONNEMENT DES ENCEINTES DANS LA ZONE D’ÉCOUTE
OBLIGATOIRE
SECONDAIRE
OPTIONNEL
OU
ABBILDUNG 1
LAUTSPRECHERPLATZIERUNG IM HÖRBEREICH
ABBILDUNG 2
CENTER-KANAL
ABBILDUNG 4
WANDBEFESTIGUNG VON SURROUND-LAUTSPRECHERN
ABBILDUNG 3
STANDARDANSCHLÜSSE
S
S
TV
C
L R
X
Y
Z
SL
SR
SL
SR
X=Y=Z
Front Right Front Left
S
S
TV
C
L
R
X
Y
Z
SL
SR
SL
SR
X=Y=Z
Front Right Front Left
S
S
TV
C
L R
X
Y
Z
SL
SR
SL
SR
X=Y=Z
Front Right Front Left
S
S
TV
C
L R
X
Y
Z
SL
SR
SL
SR
X=Y=Z
Front Right Front Left
S
S
TV
C
L R
X
Y
Z
SL
SR
SL
SR
X=Y=Z
Front Right Front Left
6’ - 15’
Sub
(Subwoofer)
Optionale seitliche Platzierung
von Surround-Lautsprechern
(Option A wird bevorzugt)
Nr. 10 oder Nr. 12
2,5- bis 3-Zoll Flachkopf-Holzschrauben
In Ständerprofil befestigen oder Dübel
verwenden – etwa 6 mm hervorstehen lassen
VORSICHT!
Verwenden Sie das Befestigungsloch
nicht zur Deckenmontage!
Unter
Über
ODER
ODER
Vorne (links) Vorne (rechts)
Sub
(Subwoofer)
TV
SBL
SL SR
L
R
C
SUB SUB
SBR
3
0
º
1
2
0
º
-
1
5
0
º
9
0
º
-
1
2
0
º
SBRSBLRL
1
2
3
1
3
2 2
3
1
SL SR
R-26FA R-14SA R-14SA
R-14SAR-26FA
REFERENCE MIT DOLBY ATMOS
®
TECHNOLOGIE
LAUTSPRECHERPLATZIERUNG IM HÖRBEREICH
NOTWENDIG
SEKUNDÄR
OPTIONAL
ODER
TV
SBL
SL SR
L
R
C
SUB SUB
SBR
3
0
º
1
2
0
º
-
1
5
0
º
9
0
º
-
1
2
0
º
SBRSBLRL
1
2
3
1
3
2 2
3
1
SL SR
R-26FA R-14SA R-14SA
R-14SAR-26FA
ALTAVOCES REFERENCE CON TECNOLOGÍA ATMOS
®
DE DOLBY
UBICACIÓN DEL ALTAVOZ EN EL ÁREA DE AUDICIÓN
OBLIGATORIO
SECUNDARIO
OPCIONAL
O
BIEN
FIGURA 1
POSICIONAMENTO DAS CAIXAS ACÚSTICAS NO AMBIENTE
FIGURA 2
CANAL CENTRAL
FIGURA 4
INSTALAÇÃO DAS CAIXAS ACÚSTICAS SURROUND EM PAREDE
FIGURA 3
CONEXÕES PADRÃO
S
S
TV
C
L R
X
Y
Z
SL
SR
SL
SR
X=Y=Z
Front Right Front Left
S
S
TV
C
L
R
X
Y
Z
SL
SR
SL
SR
X=Y=Z
Front Right Front Left
S
S
TV
C
L R
X
Y
Z
SL
SR
SL
SR
X=Y=Z
Front Right Front Left
S
S
TV
C
L R
X
Y
Z
SL
SR
SL
SR
X=Y=Z
Front Right Front Left
S
S
TV
C
L R
X
Y
Z
SL
SR
SL
SR
X=Y=Z
Front Right Front Left
6’ - 15’
(Subwoofer)
Posicionamento de surround
lateral opcional
(A opção A é melhor)
Parafusos de caba chata para madeira no
10 ou 12 de 63 a 76 mm de comprimento
Montar na viga de parede ou usar buchas –
deixar 64 mm expostos
CUIDADO!
o use o orifício em forma
de fechadura para instalação
no teto!
Abaixo
Acima
OU
Frontal
esquerda
Frontal
direita
(Subwoofer)
OU
TV
SBL
SL SR
L
R
C
SUB SUB
SBR
3
0
º
1
2
0
º
-
1
5
0
º
9
0
º
-
1
2
0
º
SBRSBLRL
1
2
3
1
3
2 2
3
1
SL SR
R-26FA R-14SA R-14SA
R-14SAR-26FA
REFERENCE COM TECNOLOGIA DOLBY ATMOS
®
OBRIGATÓRIO
SECUNDÁRIO
OPCIONAL
OU
POSICIONAMENTO DAS CAIXAS ACÚSTICAS NO AMBIENTE
FIGURA 1
COLLOCAZIONE DEGLI ALTOPARLANTI NELLAREA DI ASCOLTO
FIGURA 2
CANALE CENTRALE
FIGURA 4
FISSAGGIO A PARETE DEGLI ALTOPARLANTI SURROUND
FIGURA 3
CONNESSIONI STANDARD
S
S
TV
C
L R
X
Y
Z
SL
SR
SL
SR
X=Y=Z
Front Right Front Left
S
S
TV
C
L
R
X
Y
Z
SL
SR
SL
SR
X=Y=Z
Front Right Front Left
S
S
TV
C
L R
X
Y
Z
SL
SR
SL
SR
X=Y=Z
Front Right Front Left
S
S
TV
C
L R
X
Y
Z
SL
SR
SL
SR
X=Y=Z
Front Right Front Left
S
S
TV
C
L R
X
Y
Z
SL
SR
SL
SR
X=Y=Z
Front Right Front Left
6’ - 15’
(Subwoofer)
Collocazione facoltativa
surround laterali
(è preferibile l’opzione A)
Viti per legno a testa tronco-conica da
6,35 – 7,62 mm (n. 10 o 12)
Serrare le viti direttamente nel montante o nei tasselli,
lasciandone sporgere le teste di 6 mm.
ATTENZIONE
Non utilizzare la scanalatura per
vite per fissare l’altoparlante
al soffitto.
Sotto
Sopra
OPPURE
Sx anteriore Dx anteriore
(Subwoofer)
OPPURE
TV
SBL
SL SR
L
R
C
SUB SUB
SBR
3
0
º
1
2
0
º
-
1
5
0
º
9
0
º
-
1
2
0
º
SBRSBLRL
1
2
3
1
3
2 2
3
1
SL SR
R-26FA R-14SA R-14SA
R-14SAR-26FA
REFERENCE CON TECNOLOGIA DOLBY ATMOS
®
OBBLIGATORI
SECONDARI
OPZIONALI
OPPURE
COLLOCAZIONE DEGLI ALTOPARLANTI NELLAREA DI ASCOLTO
1-800-KLIPSCH ©2014 KLIPSCH GROUP, INC. ALL RIGHTS RESERVED. KLIPSCH AND KEEPERS OF THE SOUND ARE REGISTERED TRADEMARKS OF KLIPSCH GROUP, INC. IN THE USA AND OTHER COUNTRIES.
A WHOLLY-OWNED SUBSIDIARY OF VOXX INTERNATIONAL CORPORATION.
3502 WOODVIEW TRACE, INDIANAPOLIS, IN, USA
KLIPSCH.COM
V06 - 0404
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60

Klipsch R-26FA Owner's manual

Category
Loudspeakers
Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI