Samsung WF407 Serie User manual

Category
Washing machines
Type
User manual
the possibilities
Thank you for purcnaslng this Samsung product.
To receive more com_)lete servbce, pease register
your Product at
B www.samsung.com/register
WF409ANW-02657D-02 EN.indd 1 2009-12-04 L.4.,4.i 11 19 35
fo tuFo¢ of youFnow
TM
2_
3_
4_
5_
6_
7_
VRT TM(Vibration Reduction Technology)
This Samsung washer performs smoothly at top spin speeds, minimizing noise and
vibration.
Super capacity
Samsung's extra-large capacity laundry machine can wash a full set of your bedding, a king-
size comforter, or up to 26 bath towels in a single load. Since you don't have to do as many
loads, you save time, money, water and energy.
Diamond drum TM
Take gentle care of your fabrics. With inside holes 36% smaller than those of conventional
drums, the diamond drum prevents fabrics from sticking out and consequently being
damaged.
Stylish design
The stylish design of this washer blends well with your environment.
Digital display & Center jog dial
The jog dial enables you to select cycles in both directions with ease, and the display is easy
to use and understand.
DD(Direct-drive) Motor
The power to handle anything! Our direct-drive inverter motor delivers power right to the
washer drum from a variable speed, reversible motor. A beltless direct-drive motor generates
a higher spin speed of 1,200 rpm for more effective, quiet operation. The washer also has
fewer moving parts, meaning fewer repairs.
Sanitize
When selecting this cycle, the water heats to an extra high temperature to remove 99.9%
of certain bacteria typically found on clothing, bedding, or towels. This certification is
conducted by NSF International, an independent third-party testing and certification
organization.
Please check garment care label to avoid garment damage. Only Sanitize cycles have been
designed to meet the requirements of this protocol for sanitization efficacy.
_tSF_ _ I NSF Protocol P172
Sanitization Performance of Residential and
Commercial, Family-Sized Clothes Washers
2 features of your new VRTrMSTEAM washer
WF409ANW-02657D-02 EN.indd 2 2009-12-04 L.4.,4.i 11 19 35
8_
9_
Pedestal with storage drawer (Model No: WE357A7P/E/W/R)
An optional 15in.(38.1cm) pedestal is available to raise the washer for easier loading and
unloading.
It also offers a built-in storage drawer that can hold a 100oz.(6.25 Ib) bottle of detergent.
Stacking (Model No: SK-3A1/XAA, SK-4A/XAA, SK-5A/XAA)
Samsung washer and dryer can be stacked to maximize usable space. An optional stacking
kit is available for purchase from your Samsung retailer.
<Pedestal with Storage Drawer> <Stacking>
10n Deep steam 6/VF407 Series only)
The deep steam feature boosts cleaning performance and loosens grime and dirt, thus
providing superior cleaning results.
features of your new VRT rMSTEAM washer 3
WF409ANW-02657D-02 EN.indd 3 2009-12-04 L.4.,4.i 11 1935
Congratulations on your new Samsung washer, This manual contains important
information on the installation, use and care of your appliance, Please take time to
read this manual to take full advantage of your washer's many benefits and features,
WHAT YOU NEED TO KNOW ABOUT SAFETY INSTRUCTIONS
Warnings and Important Safety Instructions in this manual do not cover all possible conditions and
situations that may occur. Itis your responsibility to use common sense, caution, and care when installing,
maintaining, and operating your washer.
IMPORTANT SAFETY SYMBOLS AND PRECAUTIONS
What the icons and signs in this user manual mean:
Hazards or unsafe practices that may result in severe personal injury
WARNING or death.
Hazards or unsafe practices that may result in minor personal injury or
CAUTION property damage.
& To reduce the risk of fire, explosion, electric shock, or personal injury
CAUTION when using your washer, follow these basic safety precautions:
Do NOT attempt.
Do NOT disassemble.
Do NOT touch.
Follow directions explicitly.
Unplug the power plug from the wall socket.
Make sure the machine is grounded to prevent electric shock.
Call the service center for help.
Note
These warning signs are here to prevent injury to you and others.
Please follow them explicitly.
After reading this section, keep it in a safe place for future reference.
Read all instructions before using the appliance.
SAVE THESE
4 safety informaton
INSTRUCTIONS
WF409ANW-02657D-02 EN.indd 4 2009-12-04 L._.,2ti_11:19:36
,/_ WARNING: To reduce the risk of fire, electric shock, or injury to persons when using your
WAR,,NG_appliance, follow basic precautions, including the following:
1. Read all instructions before using the appliance.
2. Do not wash or dry articles that have been previously cleaned in, washed in, soaked in,
or spotted with gasoline, dry-cleaning solvents, other flammable or explosive substances
as they give off vapors that could ignite or explode.
3. Do not allow children to play on or in the appliance. Close supervision of children is
necessary when the appliance is used near children.
4. Before the appliance is removed from service or discarded, remove the door to the
washing or drying compartment.
5. Do not reach into the appliance if the drum is moving.
6. Do not install or store this appliance where it will be exposed to the weather.
7. Do not tamper with controls.
8. Do not repair or replace any part of the appliance or attempt any servicing unless
specifically recommended in the useFmaintenance instructions or in published user-
repair instructions that you understand and have the skills to carry out.
9. Do not add gasoline, dry-cleaning solvents, or other flammable or explosive substances
to the wash water. These substances give off vapors that could ignite or explode.
10.Under certain conditions, hydrogen gas may be produced in a hot water system
that has not been used for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE. If
the hot water system has not been used for such a period, before using a washer or
combination washer-dryer, turn on all hot water faucets and let the water flow from
each for several minutes. This will release any accumulated hydrogen gas. As the gas is
flammable, do not smoke or use an open flame during this time.
SAVE THESE iNSTRUCTiONS
safety informaton 5
WF409ANW-02657D-02 EN.indd 5 2009-12-04 L._.,2M_11:19:36
SEVERE WARNING SIGNS FOR iNSTALLATiON
WARNING
®
Plug the power cord into an AC 120V/60Hz/15A wall socket or higher and use the socket
for this appliance only. In addition, do not use an extension cord.
Sharing a wall socket with other appliances using a power strip or extending the power
cord may result in electric shock or fire.
Do not use an electric transformer. It may result in electric shock or fire.
Ensure that the power voltage, frequency and current are the same as those of the
product specifications. Failing to do so may result in electric shock or fire.
The installation of this appliance must be performed by a qualified technician or service
company.
Failing to do so may result in electric shock, fire, an explosion, problems with the
product, or injury.
Remove all foreign substances such as dust or water from the power plug terminals and
contact points using a dry cloth on a regular basis.
Unplug the power plug and clean it with a dry cloth.
Failing to do so may result in electric shock or fire.
Plug the power plug into the wall socket in the right direction so that the cord runs towards
the floor.
Ifyou plug the power plug into the socket in the opposite direction, the electric wires
within the cable may be damaged and this may result in electric shock or fire.
This appliance must be properly grounded.
Do not ground the appliance to a gas pipe, plastic water pipe, or telephone line.
This may result in electric shock, fire, an explosion, or problems with the product
Never plug the power cord into a socket that is not grounded correctly and make sure
that it is in accordance with local and national codes.
Q
Do not install this appliance near a heater, inflammable material.
Do not install this appliance in a humid, oily or dusty location, in a location exposed to direct
sunlight and water (rain drops).
Do not install this appliance in a location where gas may leak.
This may result in electric shock or fire.
Plug the power plug into the wall socket firmly. Do not use a damaged power plug,
damaged power cord or loose wall socket.
This may result in electric shock or fire.
Do not pull or excessively bend the power cord.
Do not twist or tie the power cord.
Do not hook the power cord over a metal object, place a heavy object on the power cord,
insert the power cord between objects, or push the power cord into the space behind the
appliance.
This may result in electric shock or fire.
Do not pull the power cord, when unplugging the power plug.
Unplug the power plug by holding the plug.
Failing to do so may result in electric shock or fire.
_When the power plug or power cord is damaged, contact your nearest service center.
6 safety informaton
WF409ANW-02657D-02 EN.indd d 2009-12-04 L._.,2ti_11:19:36
CAUTION SIGNS FOR INSTALLATION
CAUTION
This appliance should be positioned in such a way that it is accessible to the power plug.
Failing to do so may result in electric shock or fire due to electric leakage.
Install your appliance on a level and hard floor that can support its weight.
Failing to do so may result in abnormal vibrations, noise, or problems with the product.
Unplug the power plug when the appliance is not being used for long periods of time or
during a thunder/lightning storm.
Failing to do so may result in electric shock or fire.
SEVERE WARNING SIGNS FOR USING
WARNING
Ifthe appliance is flooded, cut the power immediately and contact your nearest service
center.
Ifthe appliance generates a strange noise, a burning smell or smoke, unplug the power
plug immediately and contact your nearest service center.
Failing to do so may result in electric shock or fire.
In the event of a gas leak (such as propane gas, LP gas, etc.), ventilate immediately without
touching the power plug. Do not touch the appliance or power cord.
Do not use a ventilating fan.
A spark may result in an explosion or fire.
Do not wash items contaminated with gasoline, kerosene, benzene, paint thinner, alcohol or
other flammable or explosive substances.
This may result in electric shock, fire or an explosion.
Do not open the washer door by force while it is operating (high-temperature washing/
drying/spinning).
Water flowing out of the washer may result in burns or cause the floor to be slippery.
This may result in injury.
Opening the door by force may result in damage to the product or injury.
Make sure to remove the packaging (sponge, styrofoam) attached to the bottom of the
washer before using it.
Do not insert your hand under the washer.
This may result in injury.
safety informaton 7
WF409ANW-02657D-02 EN.indd 7 2009-12-04 L._.,2tfl11:19:36
Q
Do not touch the power plug with wet hands.
This may result in electric shock.
Do not turn the appliance off by unplugging the power plug while an operation is in
progress.
Plugging the power plug into the wall socket again may cause a spark and result in
electric shock or fire.
Keep all packaging materials well out of the reach of children, as packaging materials can
be dangerous to children.
Ifa child places a bag over its head, it may result in suffocation.
Do not let children or infirm persons use this washer unsupervised.
Failing to do so may result in electric shock, burns or injury.
Do not insert your hand or a metal object under the washer while it is operating.
This may result in injury.
Do not attempt to repair, disassemble, or modify the appliance yourself.
Do not use any fuse(such as cooper, steel wire, etc.) other than the standard fuse.
When repairing or reinstalling the appliance is required, contact your nearest service
center.
Failing to do so may result in electric shock, fire, problems with the product, or injury.
If any foreign substance such as water has entered the appliance, unplug the power plug
and contact your nearest service center.
Failing to do so may result in electric shock or fire.
When the water supply hose comes loose from the faucet and floods the appliance, unplug
the power plug.
Failing to do so may result in electric shock or fire.
CAUTION SIGNS FOR USING
CAUTION
When the washer is contaminated by a foreign substance such as detergent, dirt, food
waste, etc., unplug the power plug and clean the washer using a damp and soft cloth.
Failing to do so may result in discoloration, deformation, damage or rust.
The front glass may be broken by a strong impact. Take care when using the washer.
When the glass is broken, it may result in injury.
After a water supply failure or when reconnecting the water supply hose, open the faucet
slowly.
Open the faucet slowly after a long period of non-use.
The air pressure in the water supply hose or the water pipe may result in damage to a
part or in water leakage.
If a drain error occurs during an operation, check if there is a draining problem.
Ifthe washer is used when it is flooded because of a draining problem, it may result in
electric shock or fire due to electric leakage.
8 safety informaton
WF409ANW-02657D-02 EN.indd 8 2009-12-04 L._.,2ti_11:19:36
Insert the laundry into the washer completely so that laundry does not get caught in the
door.
If laundry gets caught in the door, it may result in damage to the laundry or the washer,
or result in water leakage.
Ensure that the faucet is turned off when the washer is not being used.
Ensure that the screw on the water supply hose connector is properly tightened.
Failing to do so may result in property damage or injury.
Check if the rubber seal is not contaminated by foreign substances (waste, thread, etc).
If the door is not closed completely, it may result in water leakage.
Open the faucet and check if the water supply hose connector is firmly tightened and that
there is no water leaking before using the product.
If the screws or the water supply hose connector are loose, it may result in water
leakage.
Do not stand on top of the appliance or place objects (such as laundry, lighted candles,
lighted cigarettes, dishes, chemicals, metal objects, etc.) on the appliance.
This may result in electric shock, fire, problems with the product, or injury.
Do not operate the appliance with wet hands.
This may result in electric shock.
Do not spray volatile material such as insecticide onto the surface of the appliance.
As well as being harmful to humans, it may also result in electric shock, fire or problems
with the product.
Do not place an object that generates a electromagnetic field near the washer.
This may result in injury due to a malfunction.
Since the water drained during a high-temperature wash or drying cycle is hot, do not
touch the water.
This may result in burns or injury.
Do not wash, spin or dry water-proof seats, mats or clothing (*).
Do not wash thick, hard mats even if the washer mark is on the care label.
This may result in injury or damage to the washer, walls, floor or clothing due to
abnormal vibrations.
* Woolen bedding, rain covers, fishing vests, ski pants, sleeping bags, diaper covers,
sweat suits, and bicycle, motor cycle, car covers, etc.
Do not operate the washer when the detergent box is removed.
This may result in electric shock or injury due to water leakage.
Do not touch the inside of the tub during or just after drying as it is hot.
This may result in burns.
Do not insert your hand into the detergent box after opening it.
This may result in injury as your hand may be caught by the detergent input device.
safety informaton 9
WF409ANW-02657D-02 EN.indd 9 2009-12-04 L.4.,4.ii11:19:36
Do not place any objects (such as shoes, food waste, animals) other than laundry into the
washer.
This may result in damage to the washer, or injury and death in the case of pets due to
the abnormal vibrations.
Do not press the buttons using sharp objects such as pins, knifes, fingernails, etc.
This may result in electric shock or injury.
Do not wash laundry contaminated by oils, creams or lotions usually found in skincare
shops or massage clinics.
This may result in the rubber seal becoming deformed and water leakage.
Do not leave metal objects such as a safety pin or hair pin, or bleach in the tub for long
periods of time.
This may cause the tub to rust.
Ifrust starts appearing on the surface of the tub, apply a cleansing agent (neutral) to the
surface and use a sponge to clean it. Never use a metal brush.
Do not use dry cleaning detergent directly and do not wash, rinse, or spin laundry
contaminated by dry cleaning detergent.
This may result in spontaneous combustion or ignition due to the heat of the oxidation of
the oil.
Do not use hot water from water cooling/heating devices.
This may result in problems with the washer.
Do not use natural hand-washing soap for the washer.
Ifit hardens and accumulates inside the washer, it may result in problems with the
product, discoloration, rust or bad odors.
Do not wash large laundry items such as bedding in the washing net.
Place socks and brassieres into the washing net and wash them with the other laundry.
Failing to do so may result in injury due to abnormal vibrations.
Do not use hardened detergent.
Ifit accumulates inside the washer, it may result in water leakage.
Do not wash throw rug or doormat.
Ifyou wash throw rug or doormat, the sand will accumulate inside the washer. It may
result in error such as not draining.
SEVERE WARNING SIGNS FOR CLEANING
WARNING
G
Do not clean the appliance by spraying water directly onto it.
Do not use benzene, thinner or alcohol to clean the appliance.
This may result in discoloration, deformation, damage, electric shock or fire.
Before cleaning or performing maintenance, unplug the appliance from the wall socket.
Failing to do so may result in electric shock or fire.
10 safety information
WF409ANW-02657D-02 EN.indd 10 2009-12-04 L.4.,4.ii11:19:36
contents
SETTING UP YOUR WASHER
WASHING A LOAD OF LAUNDRY
12 Checking the parts
13 Meeting installation requirements
13 Electricalsupply
13 Grounding
13 v'Vater
14 Drain facility
14 Flooring
14 Location consideration
14 Alcove or closet installation
14 Installing your washer
17 Loading your washer
17 Getting started
18 Overview of the control panel
20 Child lock
20
20 My cycle
21 ,_;team
21 Washing clothes using the cycle selector
22 Detergent use
22 Features
CLEANING AND MAINTAINING YOUR
WASHER
24 Cleaning the exterior
24 Cleaning the interior
24 Cleaning the dispensers
25 Storing your washer
25 Cleaning the debris filter
26 Cleaning the door seal/bellow
26 Preserving the top cover and the front frame
TROUBLESHOOTING AND
INFORMATION CODES
27 Check these points if your washer...
29 Information codes
APPENDIX
WARRANTY
31 Fabric care chart
32 Cycle chart
34 Helping the environment
34 Declaration of conformity
34 Specification
35 Warranty
contents 11
WF409ANW-02657D-02 EN.indd 11 2009-12-04 ;._2_i_ 11:19:37
CHECKING THE PARTS
Unpack your washer and inspect it for shipping damage. Make sure you have received all of the items
shown below. Ifyour washer was damaged during shipping, or you do not have all of the items, contact
1-800-SAMSUNG(726-7864).
To prevent personal injury or strain, wear protective gloves whenever lifting or carrying the unit.
Keep all packaging materials well out of the reach of children, as packaging materials can be
WARN,NGdangerous to children.
Ifa child places a bag over its head, it may result in suffocation.
Hot water supply hose
Cold water supply
hose
Detergent drawer
Control panel
Door
Power cord
Tub
Drain hose
Debris filter
Drain tube
Filter cover
Adjustable legs
( use for the Upper Bolt Hole )
Wrench Bolt hole covers Water supply hoses
[--}
Hose guide Plastic zip hose tie Manual book
Pliers Fiat screwdriver
12 setting up your new wash ng mach ne
WF409ANW-02657D-02 ZN.indd 12 2009-12-04 {.'_,'_fi 11:19:38
MEETING INSTALLATION REQUIREMENTS
Electrical supply
120 Volt 60 Hz 15 AMP fuse or circuit breaker
Individual branch circuit serving only your washer is recommended.
Your washer is equipped with a power cord.
_ Never use an extension cord.
WARNING
Grounding
ELECTRICAL GROUNDING IS REQUIRED ON THIS APPLIANCE.
This appliance must be grounded. Inthe event of malfunction or breakdown, grounding will
reduce the risk of electric shock by providing a path of least resistance for electric current.
This appliance is equipped with a power cord having a three-prong grounding plug for use in a
properly installed and grounded outlet.
_ Improper connection of the equipment-grounding conductor can result in a risk of electrical
WARN,NGshock. Check with a qualified electrician or serviceman if you are in doubt as to whether the
appliance is properly grounded. Do not modify the plug provided with the appliance - if it
does not fit the outlet, have a proper outlet installed by a qualified electrician.
IMPORTANT SAFETY PRECAUTIONS
To prevent unnecessary risk of fire, electrical shock or personal injury, all wiring and
grounding must be done in accordance with the National Electrical Code ANSI/FNPA, No.
70 Latest Revision and local codes and ordinances. It is the personal responsibility of the
appliance owner to provide adequate electrical service for this appliance.
_ Never connect ground wire to plastic plumbing lines, gas lines, or hot water pipes.
WARNING
Water
To correctly fill your washer in the proper amount of time, water pressure of 20-116psi(137-
800kPa) is required.
Water pressure less than 20 psi(137kPa) may cause water valve failure, or may not allow the
water valve to shut off completely. Or, it may extend the fill time beyond what your washer
controls allow, resulting in your washer turning off. A time limit is built into the controls in the
event of an internal hose becoming loose and flooding your home.
The water faucets must be within 4 ft.(122cm) of the back of your washer for the inlet hoses
provided with your washer.
_ ccessory inlet hoses are available in various lengths up to 10 ft.(305cm) for faucets that
are further away from the back of your washer.
To avoid the possibility of water damage:
,, Have water faucets easily accessible.
,, Turn off faucets when the washer is not in use.
,, Periodically check that there is no leakage from the water inlet hose fittings.
Check all connections at the water valve and faucet for leaks.
WARNING
setting up your new wash ng mach ne 13
WF409ANW-02657D-02 EN.indd 13 2009-12-04 L.&,&il11:19:39
Drain facility
The recommended height of the standpipe is 18 in (46 cm). The drain hose must be routed
through the drain hose clip to the standpipe. The standpipe must be large enough to accept the
outside diameter of the drain hose. The drain hose is attached at the factory.
Flooring
For best performance, your washer must be installed on a solidly constructed floor. Wood floor
may need to be reinforced to minimize vibration and/or unbalanced load situations. Carpeting
and soft tile surfaces are contributing factors in vibration and may cause your washer to move
slightly during the spin cycle.
A Never install your washer on a platform or weakly supported structure.
CAUTION
Location consideration
Do not install your washer in areas where water may freeze, since your washer will always
maintain some water in its water valve, pump, and hose areas. This can cause damage the
pump, hoses and other components.
Alcove or closet installation
MINIMUM CLEARANCES FOR CLOSET AND ALCOVE INSTALLATIONS:
Sides - 1 In.(2.5 cm) Top - 17 In.(43.2 cm)
Rear- 4 In.(10.2 cm) Closet Front- 2 In.(5.1 cm)
If the washer and dlTer are installed together, the closet front must have at least 72 in2(465 cm_)
of an unobstructed air opening. Your washer alone does not require a specific air opening.
INSTALLING YOUR WASHER
STEP 1
Selecting a location
Before install the make the location:
you
washer, sure
,, Has a hard, level surface without carpeting or flooring that may obstruct ventilation.
* Is away from direct sunlight.
,, Has adequate ventilation.
* Will not be freezing (below 32 °For 0 °C).
,, Is away from heat sources such as oil or gas.
* Has enough space so that the washer doesn't stand on its power cord.
14 setting up your new wash ng mach ne
WF409ANW-02657D-02 EN.indd 14 2009-12-04 L.4.,4.ii11:19:39
STEP 2
Removing the shipping bolts
Before using your washer, you must remove the four
shipping bolts from the back of the unit.
1, Loosen all the bolts with the supplied wrench.
2, Slide the bolt and spacer up and remove the bolt with
the spacer through the hole in the rear wall of your
washer. Repeat for each bolt.
3. Fill the holes with the supplied bolt hole covers.
4. Keep the shipping bolts and spacers for future use.
STEP 3
Installing your washer
1. Place the drain hose in the drain facility.
Be sure an airtight connection is NOT
made between the drain hose and the
standpipe.
The standpipe must be at least 18in.(46
cm) high.
_ Caution must always be exercised to
avoid collapsing or damaging the drain
hose. For best results, the drain hose
should not be restricted in any way - by
elbows, couplings, or excessive lengths.
For situations where the drain hose
cannot be conveniently elevated to at
least 18in.(46 cm), the drain hose must
be supported.
LaundP tub
Tie
strap
Guide
Stand pipe
96" Max
,18" Min
2= Before connect the inlet hoses to water faucets, check to
ensure a washer is inside coupling.
Washer
setting up your new wash ng mach ne 15
WF409ANW-02657D-02 EN.indd 15 2009-12-04 L.4.,4.ii11:19:40
3, Check the inlet hose to ensure a washer is inside each fill hose.
Thread the inlet hoses to the HOT and COLD faucet
connections.
On the other end of the hose, check for one rubber washer per
hose and install each fill hose to the water valve. Make sure the
hose with the Hot printed line is attached to the HOT faucet.
Tighten by hand until snug, then two-thirds of a turn with pliers.
For correct water use, connect both HOT and COLD water
valves. Ifeither or both are not connected, an "nF" (no fill) error
can Occur.
4, Turn on the HOT and COLD water supply and check all
connections at the water valve and the faucet for leaks.
Cold Hot
Cold printed Hot printed
5=
Plug the power cord into a 3-prong, well grounded 120 volt
60 Hz approved electrical outlet protected by a 15-amp
fuse or comparable circuit breaker.
Your washer is grounded through the third prong of the
power cord when plugged into a three-prong grounded
receptacle.
6=
7.
Slide your washer into position.
Level your washer by turning the leveling legs in or out as
necessary by hand or by using the wrench included with
your washer.
When your washer is level, tighten the locking nuts using
the wrench or (-) flathead screwdriver.
Your washer must be leveled on all four sides. A
carpenter's level should be used on all four corners of
your washer. It's the best to recheck after the first dozen
washes.
Lockinc
Nut
LeveBing
Leg
Avoid damage to the legs. Do not move
the washer unless the locking-nuts are
fastened to the bottom of the washer.
16 setting up your new wash ng mach ne
WF409ANW-02657D-02 EN.indd 16 2009-12-04 L.4.,4.ii11:19:41
\
LOADING YOUR WASHER
You can fill the tub with dry, unfolded clothes; but DO NOT OVERLOAD the tub.
Overloading may reduce washing efficiency, cause excess wear, and possibly cause creasing or
wrinkling of the load.
Wash delicate items such as bras, hosiery, and other lingerie in the delicates cycle with similar
lightweight items.
When washing big bulky items or a few smaller items that don't fill the tub completely - a rug, a pillow,
stuffed toys, or one or two sweaters, for example - add a few towels to improve tumbling and spin
performance.
(_ During the spin cycle, the washer may add additional water to redistribute the excessive imbalance
inside the tub.
When washing heavily soiled loads, do not overload your washer in order to assure good cleaning results.
To add a forgotten item:
1. Press the Power button.
2. Press the Start/Pause button.
3. Wait for the door lock light to go out (Immediately).
4o Add the item, close the door, and press the Start/Pause button.
The door safety state continues for 15 seconds and the cycle is restarted.
(_To add items within five minutes of the wash
ensure
thorough cleaning, starting cycle.
GETTING STARTED
1. Load your washer.
2. Close the door.
Zw_xPush the laundry into the tub completely to prevent the laundry from being caught in the door or from
CAUTIONfalling out of the tub.
3o Press the Power button.
4. Add detergent and additives to the dispenser (See page 22-24).
5. Select the appropriate cycle and options for the load (See page 18-20).
6o Press the Start/Pause button.
7o The Wash Indicator will illuminate.
8o The estimated cycle time will appear in the display.
The time may fluctuate to better indicate the time remaining in the cycle.
(_The actual time required for a cycle may differ from the estimated time in the display depending on the
water pressure, water temperature, detergent, and laundry.
9. Before your washer starts to fill, it will make a series of clicking noises to check the door lock and do a
quick drain.
®
When the cycle is complete, the door lock light will go out and "End" will appear in the display.
DO NOT attempt to open the door until the door lock light is off. Toadd a forgotten item, see
"Loading your washer" section (See page 17).
When your washer is restarted after a pause, expect a delay of up to 15 seconds before the cycle
continues.
Pressing Power button cancels the cycle and stops your washer.
The Wash, Rinse and Spin indicators will illuminate during those portions of the cycle.
washng a oad of aundry 17
WF409ANW-02657D-02 EN.indd 17 2009-12-04 L._.,_.ii11:19:41
OVERVIEW OF THE CONTROL PANEL
[ WF409 ]
Normal--
HeavyDuty
Whites--
PermPress-
Sanitize-
Bedding--
@
Temp. Sp,in Soil Level Signal
Power
[ WF407 ]
[] Steam Cycles
-- Delicates
HandWash
-- _Wool
-Quick Wash
-- Rinse+Spin
-- Spin Only
Wa,h\_f
_Extended ,.._
1 Spin_J,
DdoyS%
Start_ '
s+ o,© +,
Start/ Pause
@ @ @ © ® @
0 ExtraHot/Cold 0 ExtraHigh 0 Heavy 0 Louder
() HotICold () High _ A _ A
_j WarrWWarm _ Medium _Normal ( _So_ter
(+'WarmlCold (_Low 0 _ 0 y
'] CotdlCoJd (_ No Spin _)Light _ Off
Temp. Spin Soil Level Signal
Power
Start/Pause
@
Select the appropriate cycle for the type of load.
This will determine the tumble pattern and spin speed for the cycle.
To minimize wrinkling of your laundry, select the Perm Press cycle.
Normal - For most fabrics including cottons, linens, and normally soiled garments.
Heavy Duty - For sturdy, colorfast fabrics and heavily soiled garments.
Whites - For white fabrics with or without bleach.
Perm Press - For wash-and-wear, synthetic fabrics, and lightly to normally
soiled garments.
Sanitize - For heavily soiled, colorfast garments. This cycle heats the water to
150°F(65.6°C) to eliminate bacteria.
If Pause is selected during the heating portion of the Sanitize cycle, your
washer door will remain locked for your safety.
Bedding - For heavily soiled, colorfast garments, this cycle provides high
washing temperature and steam and is efficient in cleaning stains.
Deep steam - For bulky items such as blankets and sheets. When you are
washing comforters, use liquid detergent.
Delicates - For sheer fabrics, bras, lingerie silk, and other handwash-only
fabrics. For best results, use liquid detergent.
Hand Wash - For handwashable, special care garments.
Wool - For machine-washable wool. Loads should be under 8 pounds.
,, The Wool cycle washes laundry by moving the wash drum horizontally to
maintain the characteristics of the wool fibers and to prevent damaging
the cloth. It then stops for a while to allow the laundry to soak in the
water. This stop operation is not a problem.
18 washn9 a oad of aundry
WF409ANW-O2657D-02 EN.indd 18 2009-12-04 p_.,'_.i_11:19:42
iiii
iii
______________________________________________________________________________________________________________________________________________
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
___L_
It is recommended using a neutral detergent to prevent damage to the
cloth and to improve the washing results.
The Wool cycle of this machine has been approved
_) by Woolmark for the washing of machine washable
Woolmark products provided that the products are
washed according to the instructions on the garment
WOO Li'_{ARK label and those issued by the manufacturer of this
washer, M0904.
Quick Wash - For lightly soiled garments needed quickly.
Rinse + Spin - Use for loads that need rinsing only or to add rinse-added
fabric softener to a load.
Spin Only - Provides a spin to remove more water.
Displays the remaining cycle time, all cycle information, and error messages.
Press these buttons to select different cycle options.
Pre Wash - To use this feature add detergent to the pre wash section of the
detergent compartment. When turned on, the washer fills with cold water and
detergent, tumbles, then drains and advances to the selected wash cycle.
Some cycles cannot be selected with with this option (See page 32-33).
You cannot select the prewash option in the Delicate, Wool, Quick
Wash, Hand Wash, Rinse+Spin, and Spin Only cycles.
Extra Rinse - Add an additional rinse at the end of the cycle to more
thoroughly remove laundry additives and perfumes.
Extended Spin - Add additional time to remove more water from loads.
Delay Start - Any cycle can be delayed for 1 to 24 hours in one-hour
increments. Displayed hour indicates the time at which the wash will be started.
My Cycle - Chooseyourfavoritecycleincludingtemperature,spin,soil level,option,etc.
Steam - Pressthisbuttonto usethe SteamWashfunction.SteamWashisavailable
with HeavyDuty,Normal,PermPress,Sanitize,Beddingcycles.Forheavily
soiled,colorfastgarments,SteamWashimprovesstaintreatmentanduse
lesswaterofeachcycle(Seepage33).
Pressthe button repeatedlyto cycle through the different watertemperature options.
Extra Hot/Cold - Heavilysoiled, colorfast items.Only availablewith the Sanitize cycle.
Hot/Cold -Whites and heavilysoiled, colorfast items.
Warm/Warm - Colorfast items.When warm rinseis selected, only the final rinse will
be warm.
The other rinses will be cold to conserve energy.
Warm/Cold - Moderately soiled, colorfast items; most wrinkle-free items.
Cold/Cold - Brightly colored, very lightly soiled items.
Press the button repeatedly to cycle through the different spin speed options.
Extra High - Removes more water from loads during spin.
To minimize wrinkling of wrinkle-free and no-iron fabrics, DO NOT use
the Extra High spin option for these loads, nor overload your washer.
High - Use for underwear, t-shirts, jeans and sturdy cottons.
Medium - Use for jeans, wrinkle-free or wash-and-wear items and synthetics.
Low - Use for delicate items needing a slow spin speed.
No Spin - Drains your washer without spinning. Use for extremely delicate
items that cannot tolerate any spin.
Press the button to select the soil level/washing time.
(Heavy -) A -> Normal -) V ÷ Light)
Heavy - For heavily soiled loads.
A
Normal - For moderately soiled loads. This setting is best for most loads.
Y
Light - For lightly soiled loads.
washng a cad of aundry 19
WF409ANW-02657D-02 EN.indd 19 2009-12-04 L._.,2__11:19:42
Press the button to increase or decrease the end of cycle signal volume or
turn off the signal.
(Off --) ,& --) Softer --) V --) Louder)
Press to pause and restart programs.
Press once to turn your washer on, press again to turn your washer off. If
the washer is left on for more than 10 minutes without any buttons being
touched, the power automatically turns off.
Child lock
A function that prevents children from playing with your washer.
Once the Child Lock function is activated, the control panel cannot be activated, preventing
children from playing with the washer.
ACTIVATING/DEACTIVATING
Ifyou want to activate/deactivate the Child Lock function, press the Soil Level and Signal
buttons at the same time for 3 seconds.
How It works:
1. To activate or deactivate the Child Lock function, press and hold both the Soil level and
Signal buttons for 3 seconds. Activation/Deactivating the Child Lock function is only available
when the power is on.
2. When the Child Lock function is activated, and any button except for the Power button is
pressed, the buzzer will sound for a short period and the "Child Lock" indicator will turn off
for 10 seconds.
3. The Child Lock function stays on even after the power has been turned on and off or the
power cord has been disconnected and reconnected.
When buttons, other than the Power button, do not respond, please check if the Child
Lock function is on.
Garment+'_ ÷
You can add or take out laundry items even after the wash has started, as long as the
"Garment+ f::2÷" light is turned on. Pressing the Start/Pause button unlocks the door, unless the
water is too hot or if there is too much water in your washer. If you are able to unlock the door
and wish to continue the wash cycle, close the door and oress the Start/Pause button.
My cycle
Allows you to activate your custom wash (temperature, spin, soil level, etc.) with one-button
convenience.
By pushing the My Cycle button, you activate the settings used during the My Cycle mode. The
"My Cycle" light will indicate activation.
You can select all options as follows in the My Cycle mode.
1. Select cycle using the Cycle Selector.
2. After cycle selection, set each option.
See 32 for available option settings with each cycle.
page
3. Then, you can store the cycle and options you select by pressing the Start/Pause button
in the My Cycle mode. The cycle and options you select will be displayed the next time you
choose the My Cycle function.
You can change the My Cycle settings by repeating the same process above.
The last used setting will be displayed the next time you choose the My Cycle function.
20 washng a oad of aundry
WF409ANW-02657D-02 l_N.indd 20 2009-12-04 L._.,2tl_11:19:42
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76

Samsung WF407 Serie User manual

Category
Washing machines
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages