Whirlpool AWT 8104D Program Chart

Brand: Whirlpool

Model: AWT 8104D

Category: Washing machines

Type: Program Chart

Whirlpool AWT 8104D offers a range of features to make your laundry experience more convenient and efficient. With a maximum spin speed of 1000 RPM, it effectively removes excess water, reducing drying time. The program selector allows you to choose from various wash cycles tailored to different fabrics and soil levels, including cotton, synthetics, delicates, wool, and hand wash. It also features options for intensive rinsing, prewash, and start delay, providing flexibility in your laundry routine.

5019 100 12565

Programme Type of fabrics / Degree of soiling / Notes Max.

Load

Detergent and Additives Options Temperature

Selector

°C

Maximum

technical

Spin

Speed

rpm/min

Recommended

Spin Speed

rpm/min

Programme

duration

approx.

min 1)

Pre-

wash

Wash Softener

Bleach

Intensive

Rinse

Hold

Pre-

wash

Start

Delay

Cotton

Averagely soiled, hard wearing and temperature stable

textiles in cotton and linen (bed linen, table linen,

underwear, shirts etc.). The max. load for heavily soiled

laundry is 3,5 kg.

5,0 Yes Yes

❉❉❉❉❉❉

Cold to 90 1000 1000 120

Coloured

Averagely soiled, hard wearing and temperature stable

textiles in cotton and linen (bed linen, table linen,

underwear, shirts etc.).

5,0 Yes Yes

❉

—

❉❉❉❉

Cold to 60 1000 800 to 1000 120

Synthetics

Lightly or averagely soiled blouses, shirts, etc. made of

polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or

cotton blends.

2,5 Yes Yes

❉

—

❉❉❉❉

Cold to 60 800 600 to 700 120

Rapid Plus

Lightly soiled cotton, cotton blends, synthetics and

delicates.

3,0

—

Yes

❉

——

❉

—

❉

30 1000 600 to 700 30

Delicates

Delicate curtains, dresses, skirts and blouses. 1,5 Yes Yes

❉

——

❉❉❉

Cold to 40 800 100 to 500 45

Wool

Only machine washable woollens with pure new wool

label. If you select the special function “Rinse Hold” do not

leave garments to soak for too long.

1,0

—

Yes

❉

——

❉

—

❉

Cold to 40 800 100 to 500 30

Hand Wash

Silk and other extra delicate textiles, which are labelled

with “Hand Wash”. No spin, drain only.

1,0

—

Yes

❉

——

❉

—

❉

Cold to 30

——

Rinse

Programme for treating wash with softener. Terminates

with a gentle spin cycle.

5,0

——

❉

——

❉

—

❉

—

1000 800 to 1000 15

Intensive Spin

Programme for Intensive spin cycle. 5,0

———————

❉

—

1000 800 to 1000 5

Spin

Programme for gentle spin cycle. 1,5

———————

❉

—

800 100 to 700 5

Drain

Drain only, without spin cycle. Alternative way of

terminating programmes with “Rinse Hold” setting.

————————

❉

—— —

1) Programme duration figures

(guideline) are valid for

maximum temperature wash

with no special functions.

Wool

Stop

Water tap

PROGRAMME TABLE

AWT 8104D

N.B. This appliance is controlled by sensors. The excess of detergent in the dispenser could cause technical problems.

5019 100 12565

Prewash cycle increases programme duration by 5 to 15 min. Consumption values were measured in normalized

conditions in compliance with Standard IEC 60 456. Consumption data in the home may vary with respect to the values

in the table in relation to the water supply pressure and temperature, the load and the type of wash.

* to reduce the water temperature, some cold water is added at the end of the main wash cycle before the pump drains

the water out.

ADDING DETERGENT AND ADDITIVES

Add the detergent and the additives into the chamber as follows:

• Programme with pre and main wash

• Main wash programme without prewash

• Fabric softeners and conditioners

• Chlorine bleach

• Stain remover agents

• Anti-scale agents (water hardness 4)

Important:

• Be careful not to fill more than the

“MAX”

level mark.

• For programme with pre-wash: do not use liquid detergents.

• For programmes without prewash from cold to 40° C it is recommended to use a liquid detergent

to avoid whitish residues on the coloured laundry.

CLOSE THE DOOR AND SELECT THE PROGRAMME

1. Turn the

programme selector knob

to the desired programme.

2. The remaining time indication lights up and the “Start” button is flashing.

3. Turn the

temperature knob

to the required temperature.

4. Turn the

spin speed selector

to the required setting.

PRESS ANY DESIRED OPTION BUTTON(S)

. The pilot lamp lights up.

“Intensive Rinse” button

• For improved rinsing efficiency the rinse water level and the cycle time are increased.

• This option is particularly suitable for areas with very soft water washing baby linen and helps

people with allergies.

“Rinse Hold” button

• The laundry remains in the last rinse water without progressing to the spin cycle to avoid creasing

and prevent colours from changing.

• This option is particularly recommended for the programme “Synthetics” or “Delicates”.

• This function is particularly useful if you want to postpone spinning to a later time.

Note: The programme is stopped in “Rinse Hold” at the time the “Rinse Hold” button flashes.

Terminate the “Rinse Hold” option:

• Press the “Rinse Hold” button again; the programme will terminate automatically with the spin

cycle for the present wash programme.

• If you do not wish to spin the clothes, turn the programme selector knob to the drain programme

and push the “Start” button.

“Prewash” button

• Only for heavily soiled loads (for example sand, granular dirt) sensible.

• The cycle time increases from 5 to 15 min.

“Start Delay” button

• Select the programme and the option (if necessary). The remaining time indication lights up;

• Press the “Start Delay” button to select the delay time by 2, 4, 6, 8 hours;

• Press the “Start” button. The “Start Delay” light flashes until the programme starts.

• The number of hours preselected can later be reduced pressing again the “Start Delay” button.

To cancel the “Start Delay” option.

• Turn the programme selector to the “” position.

PROGRAMME START

Open the tap and press the “Start” button. The pilot lamp lights up.

DOOR LOCK

During the running programme the door can be opened for adding further laundry.

The door locks automatically in all rinsing and spinning cycles. If the programme is stopped or the

electrical power supply is terminated, the door lock will open after approximately 1 minute.

Note:

If you open the door during the programme, the “Start” button is flashing. Press it again to

continue the cycle.

PROGRAMME END

• The rest time display is on “Stop”.

1. Turn the programme selector to the

“”

position.

2. Turn the water supply tap off.

3. Open the door and the drum flaps and unload the machine.

SELECTING A NEW PROGRAMME, SPIN SPEED, OPTIONS AFTER PROGRAMME START

1. Press the “Start” button to pause the programme. The light flashes.

2. Select the new programme, temperature, spin speed or options.

3. Press the “Start” button to start the programme again.

TO STOP, RESET A PROGRAMME BEFORE THE END

1. Press the “Start” button to pause the programme. The light flashes.

2. Set the programme selector to “Drain”.

3. Press the “Start” button to start the drain programme.

The door is unlocked as soon as the rest time display is on “Stop”.

AUTOMATIC SAFETY FUNCTIONS / FAULTS

This washing machine is equipped with automatic safety functions which detect and diagnose faults at

an early stage and react appropriately. Often, however, the faults detected are small enough to be

solved in a matter of minutes. For example:

• The washing machine will not start.

• The additive products are not being fully washed out of the detergent dispenser.

• The washing machine is unstable during the spin cycle.

• The washing machine does not spin at the end of the programme.

Information about the above problem can be found in the “Troubleshooting Guide”.

What should I do when the automatic safety detects a malfunction?

The programme is interrupted and the fault is indicated as follows:

CONSUMPTION DATA

Programme Temperature

Selector

(°C)

Load

(kg)

Water

(l)

Energy

(kWh)

Programme

duration

(min)

Cotton 90 5,0 49* 1,6 120

Coloured Cotton 60 5,0 48 1,15 120

Synthetics 60 2,0 54 0,7 120

Synthetics 40 2,0 50 0,5 80

Rapid Plus 30 min 30 3,0 35 0,4 30

Delicates 40 1,5 50 0,5 45

Wool 40 1,0 50 0,5 45

Hand Wash 30 1,0 35 0,4 30

Indicators flashing Solution

Remaining time indication and water tap . See “No or insufficient water supply”.

Remaining time indication Other faults (see “Troubleshooting Guide”)

Whirlpool AWT 8104D Program Chart

Brand: Whirlpool

Model: AWT 8104D

Category: Washing machines

Type: Program Chart

Download PDF

report

Whirlpool AWT 8104D Program Chart

Whirlpool AWT 8104D Program Chart

Related papers

Other documents