Audiovox AN-200 User manual

GLASS MOUNT MOBILEGLASS MOUNT MOBILE

GLASS MOUNT MOBILE

TELEVISIONTELEVISION

TELEVISION

ANTENNANTENN

ANTENN

AN-200AN-200

AN-200

InstrInstr

Instr

uction Manuction Man

uction Man

ualual

ual

Audiovox Corporation

150 Marcus Blvd., Hauppauge, NY 11788

Technical Support 1-800-645-4994

Mounting Instructions

Clean outside of window where antenna is to be mounted. Window should be free from moisture, dirt and

oil. Peel adhesive backing from antenna mast and place antenna carefully against surface of window.

The provided mast clip should be snapped onto the mast. Peel adhesive backing from antenna mast clip

and attach to the window.

Clean inside of window. Window should be free from moisture, dirt and oil. Peel adhesive backing from

pickup directly over base of antenna mast. Attach cable to pickup and to the television antenna input.

Due to the nature of TV signals, vehicle motion, direction the vehicle is facing, distance from the TV

transmitter, nearby surroundings and weather may adversely ef fect TV reception. Result s of these conditions

may be picture roll, poor reception (snowy picture), and momentary loss of color (especially while the

vehicle is moving).

For best viewing results, this antenna system is recommended to be used while the vehicle is stationary.

ANTENNA MAST CLIP

PEEL ADHESIVE BACK

AND APPLY TO WINDOW

MOUNT AN-200

HORIZONTALLY ON

NON-TINTED WINDOW

128-5563