Car Charger(Cable Not included):
¾ Use the car charger and charging cable connect camera to auto 12V power source
(cigarette lighter).
¾ Camera will automatically start recording when power is detected, if no power is
detected camera switches off.
¾ Camera can be charged and record at same time.
¾ Camera can be used in Parking Mode after engine stop and the internal battery will keep
the camera in standby up to 8 hours and enabling the G-Sensor shocks recordings.
Time Stamp:
¾ Create a new text file and rename it as TIMESET.txt
¾ Write the date and time into the file in this form: 2014:09:09 23:53:58 Y
¾ Y is for yes, to show date/time on video, if N is for no, no time stamp
¾ Put the TIMESET.txt file into root of your Micros SD card
¾ Insert MicroSD card into camera and start it 15 seconds before the time from text file.
¾
TIMESET.txt
Firmware updating:
¾ Extract .rar file to be FW26.bin
¾ Put the FW26.bin to the root of your SD card
¾ Shut off your camera
¾ Insert your SD card to camera
¾ Restart camera, Green LED flashing till stop
¾ Recording start, Upgrading finish
Package Includes:
1 x Innovv C1 Camera
1 x Innovv C1 Holder
1 x USB cable
1 x AV cable
1 x Velcro Strip
1 x User manual
1 x Neck Strap Lanyard
(No Memory Card included)