neumarker 308021 is a versatile and powerful kitchen appliance that can be used to create a variety of delicious treats. With its two cast iron baking plates, the neumarker 308021 is perfect for making everything from pancakes and waffles to grilled sandwiches and quesadillas. The adjustable temperature control allows you to customize the cooking process to suit your needs, and the non-stick coating ensures that your food will cook evenly and release easily. The neumarker 308021 also features a built-in timer, so you can set it and forget it while your food cooks.
neumarker 308021 is a versatile and powerful kitchen appliance that can be used to create a variety of delicious treats. With its two cast iron baking plates, the neumarker 308021 is perfect for making everything from pancakes and waffles to grilled sandwiches and quesadillas. The adjustable temperature control allows you to customize the cooking process to suit your needs, and the non-stick coating ensures that your food will cook evenly and release easily. The neumarker 308021 also features a built-in timer, so you can set it and forget it while your food cooks.
Bedienungsanleitung
Picco Poff & Poffertjes Grill
*308.021 (12-40930)
*308.025 (12-40940)
308021-025_G20E 1
Index
Technical data 2
Installation 2
Mounting 2
Beforefirst use 2
Function check 3
Maintenance 3
Instructions for the user 3
Operating Instructions 3+4
Safety at work 5
Cleaning 5+6
Faults - repairs 6
For your safety 6
General Features 6
308021-025_G20E 2
Technical data
Poffertjes Grill article code 12-40930
Picoo Poff article code 12-40940
Data Plate
The data plate is fitted on the cable outlet side of the unit.The units described in
these operating instructions are provided with the CE-label, and they comply to the
EC regulations no. 73/23/EWG and 89/336/EWG.
Installation
The units with 230 volts are ready to be plugged into sockets which have been
secured with max. 16 A. Important: It is only allowed to connect max. 3,6 kW or 16 A
to each phase. If more than 3,6 kW has been connected, the fuse will immediately
disconnect the power supply.
Mounting
The unit has to be positioned on a place to enable the subsequent electrical
installation and maintenance of the unit. The appliances are neither suitable for
integration into a kitchen unit nor for mounting in line.
If the unit has to be set-up close to walls, partition panels, kitchen cabinets,
decorative edgings, etc. you have to make sure that these have not been made from
inflammable material. Otherwise they have to be insulated with a heat-resistant
and non-inflammable covering. Please adhere to the fire prevention regulations.
Before first use
Please read the operation manual carefully.
Check the unit if any visible damages.
If any damages found please contact your customer service immediately.
There may not be damages at the power cord or plug. In this case please contact
your customer service to check the unit before using it.
Remove carefully the protective foil from the outside panels in order to avoid glue
residues remaining on the unit. Eventual glue residues may be removed by using an
appropriate thinner.
308021-025_G20E 3
Function check
Switch on the unit according to our following operating
instructions. Explain to the operator how to set the unit into
work as well as its function by using our operating instructions.
Maintenance
Before carrying out any maintenance work, make sure that the unit has been
disconnected from the power supply and wait until the unit has cooled down.We
recommend to let the unit be inspected regularly by a specialist (at least once a
year).
Instructions for the user
Please study carefully our operating instructions as they give you important advices
regarding to your safety during installation, operation and maintenance. Pass on
these operating instructions to any further user of this unit. Contact only an
authorized technical service for carrying-out repairs and insist on using original
spare parts. Failure to observe our above instructions may affect your safety when
operating the unit.
Never clean the unit by a water-jet! The unit is only made for professional use and
may only be operated by qualified staff.
Operating instructions
The baking plates or cast plates become very hot during operation. Use the unit only
for the explicit purposes, i.e. for baking and cooking cake mixtures (with wheat flour,
potato flour or wholemeal flour). We strictly advise against inappropriate use.
Do not use the baking plate for heating up pots or pans. Never cover the baking
plates with aluminium foil and never place plastic basins onto the baking plate.
Installation of units with cast iron plates:
Switch on the unit and heat it up for approx. 30-45 minutes at 180° C. Smoke might
escape during this procedure as the industrial grease cover is burnt away. After
finishing this procedure, grease the plates once again with vegetable oil or with anti-
adherent spray PRO 100 to remove the industrial grease from the plates.
Operation:
At reaching a working temperature of 220 °C, fill in the dough into the moulds.
Preferably with the Poffertjes Dispenser. After filling the moulds start turning the
Dutch pancakes by a fork. Following you can take the Dutch Pancakes off the
machine and serve them with liquid butter and powder sugar (or what you prefer).
308021-025_G20E 4
Important:
The units become very hot although they do not appear
to be. Therefore, we advise you to be very carefully when
placing anything onto the cast plate.
Important:
We advise you to dispend exactly the recommended quantity of dough onto the plate.
Otherwise the residual liquid dough would run out of the sides of the plates and will
smudge your device. During the baking procedure it might happen that steam
escapes from the unit. Avoid close contact with the steam otherwise it might cause
burnings. Remove the finished baking products only by using the appropriate utensils
such as long forks. Never touch the plates with bare hands. Remove (if necessary)
the spare oil after each baking process with a paper towel. Unremoved and collected
fat residues will become black otherwise and might burn into the moulds which
causes a kind of insulation layer.
Safety at work
Always make sure not to touch the hot units with bare fingers or hands. For hygienic
and safety reasons we recommend you to use wrist covering gloves. NEVER touch
the hot food with bare hands. Danger of burnings!
Operating knobs/Temperature setting:
The desired temperature of the baking plates is set by the regulators. By turning the
knob the pilot light will go on which means that the unit is switched on.
Remember:
the pilot light goes on - the unit is being heated
the pilot light goes off - the selected heat has been reached
By turning the regulator clockwise the desired temperature is set.
Cleaning
Disconnect unit from power supply and wait until the unit has cooled down before you
begin with any maintenance or cleaning procedures.
Food residues or spots on the surfaces have to be cleaned immediately (make sure
not to burn yourself as the units could still be hot) or at the latest before operation.
Use a dry cloth for cleaning if only slight residues have to be removed. If this is not
sufficient, please wait until all parts of the unit have become cold, and clean with an
appropriate, non-abrasive detergent.
The installation (only at not plug-in units) and any maintenance may only be done by
authorized technicians. Never clean the units by a water-jet!
308021-025_G20E 5
Cleaning has to be done every day while the unit is
still warm (approx. 100 °C). Use a wire brush to remove
all fat and baking residues. Afterwards use a soft brush
to remove the crumbs from the baking plate.
Faults - repairs
Thermostat faults:
If the control lamp remains on, the regulator might be defect. In this case the unit will
be heated continuously for a period longer than 30 minutes.
Heating element faults:
The pilot light is switched on for more than 30 minutes, but the unit does not become
hot.
In these two cases, please disconnect the unit from the power supply/pull out the
plug. Contact our service department and never try to repair the unit by yourself.
For your safety
All units described in these operating instructions become hotter than 60 °C. Please
adhere to our following instructions in order to avoid burning yourself.
Baking plates:
Operate the unit at an appropriate distance and make sure that your arm or your
hands do not come into contact with the cast plates.
General features
Pre-heating times:
To reach the desired temperature, the pre-heating process takes a few minutes
(max. 20 minutes).
Always use protective gloves. Use utensils for example a fork, sausage tongs etc.
Wear an apron and adequate footwear.
Finally
We recommend you to adhere to the safety precautions which are specified by the
law of the respective county.
308021-025_G20E 6
-
1
-
2
-
3
-
4
-
5
-
6
neumarker 308021 User manual
- Type
- User manual
- This manual is also suitable for
neumarker 308021 is a versatile and powerful kitchen appliance that can be used to create a variety of delicious treats. With its two cast iron baking plates, the neumarker 308021 is perfect for making everything from pancakes and waffles to grilled sandwiches and quesadillas. The adjustable temperature control allows you to customize the cooking process to suit your needs, and the non-stick coating ensures that your food will cook evenly and release easily. The neumarker 308021 also features a built-in timer, so you can set it and forget it while your food cooks.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Wells Manufacturing MOD-500T Operating instructions
-
Baldor 11C User manual
-
Dodge Flexidyne Couplings Sizes 9C and 11C Owner's manual
-
-
Hayter Harrier 41 Electric User manual
-
Electrolux EBCGL6SAL User manual
-
Bartscher 370169 Operating instructions
-
Bartscher 370165 Operating instructions
-
-
Whirlpool DUI611PX User guide