Wi-Fi 2.4GHz
& BT 4.2
EZ-72b
Model:
5
USER GUIDE
ezDevice APP
available from:
rev. 1c23
Open a browser to ezOutlet5 Web User-Interface to manage and control
it either in LAN or WAN (port forwarding required).
To locate ezOutlet5 LAN IP either;
a) Check ezDevice APP > Network > LAN or Wi-Fi IP
or;
b) Check router’s DHCP table
Default Web User-Interface login;
Username: admin
Password: device’s_last_6_MAC
(eg.: MAC=00-03-EA-A1-B2-C3, Password=A1B2C3)
Part 7. Control ezOutlet5 thru Web User-Interface
Part 6. How to Remove Device from Cloud
NOTE:
This action removes ‘Owner’ & all
‘Shared’ user’s from this device and
resets it to factory default.
1. Press & hold device’s Function Button
for 10sec.
2. Internet & Cloud Link LED will Blink.
3. Release Function Button.
Done! ezOutlet5 will now Auto Reset router when ping fails.
2. Once ezOutlet5 reconnects to internet. Press Function Button 1x
to enable Auto Reset function.
1. Reconnect Router’s power from wall to ezOutlet5. Allow router to
reconnect to internet.
Part 5. Auto Reset Router when Ping Fails
Part 4. Hardware Setup & Add to Cloud4UIS
Step 1: Power up ezOutlet5 & Install ezDevice APP ...............................
NOTE:
a. Cloud Link LED will change from BLINKING to ON.
b.The first person to ‘Add’ the device becomes the ‘Owner’.
c. Each device can only have one ‘Owner’.
d. ‘Owner’ can ‘Share’ & set usage permission to other
Cloud4UIS users.
Wi-Fi
Router
Wi-Fi
APP
.com
Cloud4UIS
ezOutlet5
AC to Wall
Socket
Step 2: Add ezOutlet5 to Cloud4UIS Account ..........................................
ezOutlet5 added to Cloud4UIS account.
Done!
a. From APP, select [+] and
model.
b. Select device S/N and setup
SSID (2.4GHz only).
via Wi-Fi OR
a. From APP, select [+] and
model.
b. Select device S/N.
via LAN
Install ezDevice APP & Sign Up for Cloud4UIS Account
1. Scan
2. Connect
3. Add
&
Part 3. LED Indicators
Internet LED
(IN)
Output LED
Cloud Link LED
(CL)
Auto Reset LED
(AR)
Off: No internet.
Blinking: Internet is currently unstable.
On: Internet is normal.
Off: Outlet is OFF.
Blinking: Outlet is Resetting.
On: Outlet is ON.
Off: Not connected to Cloud4UIS.
Blinking: Connected to Cloud4UIS but not added to account.
On: Connected to Cloud4UIS and added to account.
On: Auto Reset enabled.
Blinking: Manual control.
Both blinking until
Function Button is released.
Reset to Factory Default & remove
device link to cloud a/c (see Part 6)
IN CL AR LED Status DESCRIPTION
LEDs blinking in sequence. Firmware Upgrading.
DO NOT Interrupt or Power Off!
Part 2. Description
Function Button: Press: 1x = toggle ‘Auto Reset’ / ‘Manual Control’ function.
2x = toggle Output On / Off.
Hold: 10sec = Reset to Factory Default.
INTERNET
CLOUD LINK
AUTO RESET
AUTO RESET FN
( PRESS 1X )
PWR ON / OFF
( PRESS 2X )
FACTORY DEFAULT
( HOLD 10 SECS )
OUTPUT
FUSE
LAN
Function Button
RJ45 Port
Fuse Box
LED Indicators BT 4.2 &
Wi-Fi 2.4G
Output LED
Outlet
Spare fuse
inside
Set scheduled outlet On / Off / Reset
eg.: Schedule IP Cam, Wi-Fi AP, Router, etc to reset.
Remotely turn outlet On / Off / Reset
Managed thru APP, Cloud4UIS.com or device web interface.
Set outlet to Auto Power Reset when ping fails.
eg.: Reset unresponsive Wi-Fi AP, Router, IP cam, NAS or network device.
Features:
Part 1. Introduction
WAN
Outlet AUTO
Power Reset
2.
Wi-Fi or Router
PING timeout
1.
Remote User
APP User
.com
Cloud4UIS
LAN
PWR
/