2. Eelectron SpA
  3. PB41AxxZWE

Eelectron SpA PB41AxxZWE User manual

  • Hello! I'm a chat assistant and I've carefully reviewed the user manual for the Eelectron Push button PB41AxxZWE. This device offers remote control of dry contact loads and management of Z-Wave commands. It features local control via buttons, an on-board relay, and Z-Wave network capabilities. I'm ready to answer your questions about its setup, features, and operation.
  • How do I reset the device to factory defaults?
    How can I include the device to a Z-Wave network?
    How to exclude device from Z-Wave network?
    Can the device firmware be updated?
* The setting value for the parameter is calculated
as the sum of the associated value to the
individual buttons.
Ex: To associate to the buttons 3 and 4 the value
“10 seconds” the value of the parameter MUST be
set to 0 + 0 + 32-128-> -96
Default value: 0
Allowed values: from -128 to 127.
/