2. ATEN
  3. 2X-EA10

ATEN 2X-EA10 Quick start guide

  • Hello! I've reviewed the Installation Guide for the ATEN EZ-Lok Plug Connectors, models 2X-EA10 and 2X-EA11. This document provides instructions on how to attach and detach these connectors to secure power cables. I'm ready to assist you with any questions you might have about the installation process or the product itself.
  • How do I attach the EZ-Lok Plug Connector?
    How do I disconnect the plug from the PDU?
    What is included in the 2X-EA10 package?
    What is included in the 2X-EA11 package?
All information, documentation and specifications contained in this media are subject to change without prior notice by the manufacturer.
Please visit our website to find the most up-to-date version.
C14 EZ-Lok Plug Connector 2X-EA10
C20 EZ-Lok Plug Connector 2X-EA11
Installation Guide
MISC00000251 05/2023 V4.0
Package Contents
2X-EA10
2X-EA11
Qty
Description
Qty
Description
10
C14 EZ-Lok Plug Connector
4
C20 EZ-Lok Plug Connector
1
user instructions
1
user instructions
Installation
To secure a power cable in place, using C14 / C20 EZ-Lok Plug Connector, do the following:
1. Slide and attach the EZ-Lok Plug Connector onto a C14 or C20 plug until it clicks into place.
2. Insert the plug, with the EZ-Lok Plug Connector attached, into any available socket on a PDU by sliding it directly
over and straight into the socket.
3. To disconnect the plug from the PDU, grip onto and squeeze the EZ-Lok Plug Connector as you pull and detach
the plug from the PDU socket.
All information, documentation and specifications contained in this media are subject to change without prior notice by the manufacturer.
Please visit our website to find the most up-to-date version.
/