2. Industrial & lab equipment
  3. Electrical equipment & supplies
  4. Electrical supplies
  5. Electrical wallplates
  6. Molift
  7. Raiser Pro

Molift Raiser Pro Operating instructions

  • Hello, I am a chat assistant. I have read the document about Raiser Pro Recycling Instructions. This document contains recycling guidance that should allow you to recycle the product properly. I'm ready to answer your questions about this document and the product.
  • What are the wheels made of?
    How should the bearings be recycled?
    What should be recycled with mixed metals?
    What material is the foot plate made of?
Raiser Pro
EN - Recycling Instructions
Mixed metals
Plastic, Pur
Wheels, are made of recyclable plastics (e.g.
polypropylen and rubber) and can be removed
from the main plate and recycled seperately.
Bearings should be recycled as mixed metals.
Screws and steel rod inside the knee support
should be recycled with mixed metals.
The foot plate is made out of plastic and
should be recycled with knee support, turning
knobs and wheels.
Etac A/S
Parallelvej 3
DK-8751 Gedved
www.etac.com
RI43001 Rev A. 2022-09-30
/