All information, documentation and specifications contained in this media are subject to change without prior notice by the manufacturer.
Please visit our website to find the most up-to-date version.
KE Series Dual Rack Mount Kit – 2X-021G
Installation Guide
This dual rack mounting kit installs two KE Series units side by side in 1U of server rack space.
MISC00000270 06/2023 V4.0
Package Contents
Qty
Description
1
link bracket
1
right mounting bracket
1
left mounting bracket
4
phillips hex screws
4
flat screws
Installation:
1. Remove four screws from the KE Series units and then use the same screws to secure the units together with the
link bracket.
2. Remove the bottom and side screws from each KE Series unit.
All information, documentation and specifications contained in this media are subject to change without prior notice by the manufacturer.
Please visit our website to find the most up-to-date version.
3. Use the screws from step 2 and install the left and right mounting brackets.
4. Screw the mounting brackets to the rack.
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI