Valor 710BPB Owner's manual

710BPB Backing Plate

INSTALLATION INSTRUCTIONS

Use with Valor 700 Models only

The 710BPB Backing Plate is intended to be used on Valor heater model 700 only. Mounting of the 710 does not

affect clearances or other specications listed in the heater installation manuals.

optional

inner trims

710BPB

Installation

1. Place backing plate behind engine and position

replace anges between plate legs.

2. Attach the plate to anges with 4 screws (2 per

side top/bottom).

The 710 backing plate can be used where necessary to

cover larger replace openings, it is compatible with all

optional inner trim kits.

37-3/4” (959 mm) coverage

26-7/8” (682 mm) coverage

700 engine

Overview

Legend g3.5

Locate the plate

around the appliance

Secure from the

inside with 4

screws supplied

4003397-01

Page is loading ...