2. ROOMS TO GO
  3. 32555445

ROOMS TO GO 32555445, 32555407, 32555421 Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the ROOMS TO GO Night Stand models 5540, 5542, and 5544. This document outlines the necessary parts, provides step-by-step assembly instructions, and includes crucial safety information, especially about the prevention of tip-overs. I'm ready to assist with any questions you might have about the assembly process or the included features.
  • What is included in the hardware list?
    What is the purpose of the anti-tipping kit?
    What are the safety precautions mentioned in the document?
Thank you for purchasing this quality product. Be sure to check all packing material carefully for small
parts. Which may have come loose inside the carton during shipment. Identify and count all parts and
compare with the hardware list below :
Hardware List
No.
Picture
Description Dimension
Qty
Parts List
Night Stand
1
NIGHT STAND
No. Description
Qty
A
1 Pc
Page
1 of 2
ROOMS
TO GO
5540 / 5542 / 5544-5 - SKU # 32555407 / 32555421 / 32555445
(*) The manufacturer does NOT provided Item 4.
Notes :
2
ASSEMBLY INSTRUCTIONS
COMPLETED NIGHT STAND
ASSEMBLY OPTION 1
2 Pcs
A
COMPLETED NIGHT STAND
ASSEMBLY OPTION 2
A
LWYE
Knob (Option 2)
PARTS DETAILS
3
Screw Driver (*)
1 Pc
Handle Screw
M4 x 28mm
2 Pcs
4
Anti Tipping Kit
1 Set
Serious or fatal crushing injuries can occur
from furniture tip-over. To help prevent tip-over :
*Place heaviest items in the lowest drawers.
*Unless specifically designed to accommodate, do not
set TVs or other heavy object on the top of this product.
*Never allow children to climb or hang on drawers,
doors, or shelves.
*Never open more than one drawer at a time.
(OR)
*Do not defeat or remove the drawer interlock system.
Use of tip-over restraints may only reduce, but
not eliminate the risk of tip over.
MODEL : 5540 / 5542 / 5544
Assembly step
Page
2 of 2
NOTE :
STEP 1
To exchange handle to knob. Loosen handle screw
at plastic bag.
STEP 2
Loosen existing handle. Attach knob
to drawer.
KNOB
OPTION 2
(IN PLASTIC BAG)
4
HANDLE
SCREW
A
A
KNOB
OPTION 2
1
4
4
HANDLE
SCREW
HANDLE
OPTION 1
LOOSEN
TIGHTEN
HARDWARE
2
* Repeat same step to another drawer.
IMPORTANT : Keep the handle screw for future use.
/