2. Hytronik
  3. HED1009-BT
HED1009-BT

Hytronik HED1009-BT User manual

  • Hello! I'm your chat assistant, and I've reviewed the datasheet for the HYTRONIK LED Drivers, including the HED1009/BT, HED6010/BT, HED1025/BT, and HED1040/BT models. These drivers are Bluetooth dimmable, feature wireless mesh networking, and offer various configuration options. I'm ready to answer your questions about their specifications, features, and how they can be used in your projects.
  • What is the maximum power output of these LED drivers?
    How is dimming controlled?
    What kind of app is used for configuration?
    Are firmware updates possible?
    What kind of protection do these drivers have?
HED1009/BT HED6010/BT HED1025/BT HED1040/BT
Dimmable Drivers & Constant Current
LED Drivers with 5.0 SIG Mesh
Product Description
This series of LED drivers are Bluetooth dimmable LED drivers, with maximum
power output ranging from 9W to 40W. They all come with Switch-Dim
interface by using Push switch (retractive switch) and of course Bluetooth
dimming interface. It is ideal for direct projects or new luminaires design for
lighting manufacturers. With Bluetooth wireless mesh networking, it makes
communication between luminaires much easier without time-consuming
hardwiring, which eventually saves costs for projects. Meanwhile, simple
device setup and commissioning can be done via app.
* Certain scenes which require external photocell can
be achieved by using together with Hytronik Bluetooth
sensors,such as HBIR29, HCD038/BT + sensor head etc.
Subject to change without notice. Edition: 19 Mar. 2021 Ver. Draft Page 1/10
HED1009/BT
HED6010/BT
HED1025/BT
Hardware Features
>0.93
Switch-Dim
PWM 1KHz (1-100%) (Except for HED6010/BT)
Bluetooth dimmable control
Insulated terminal cover with cord restraint
Active PFC design
Logarithmic Dimming
Linear Dimming
Congurable constant current (CC) output via DIP
switch
Loop-in and loop-out terminals for efcient installation
Open-circuit Protection
Short-circuit Protection
Overload Protection
5-year warranty, designed for long lifetime
up to 50,000 hours
1KHz
Open-circuit
Protection
HED1040/BT
App Features
Quick setup mode & advanced setup mode
Floorplan feature to simplify project planning
Web app/platform for dedicated project management
Koolmesh Pro iPad version for on-site conguration
Grouping luminaires via mesh network
Scenes
Detailed motion sensor settings
Push switch conguration
Schedule to run scenes based on time and date
Astro timer (sunrise and sunset)
Staircase function (primary & secondary)
Internet-of-Things (IoT) featured
Device rmware update over-the-air (OTA)
Device social relations check
Bulk commissioning (copy and paste settings)
Power-on status (memory against power loss)
Ofine commissioning
Different permission levels via authority management
Network sharing via QR code or keycode
Remote control via gateway support HBGW01
Interoperability with Hytronik Bluetooth product portfolio
Compatible with EnOcean switch EWSSB/EWSDB
Continuous development in progress…
Draft
Model No. HED1009/BT HED6010/BT
220~240VAC 50/60Hz
Mains Voltage
Mains Current
Power Factor
Max. Efciency
Input
Output
Safety
and EMC
Environment
0.065~0.06A
<3%
45V
<0.5s
<3%
52V
<0.5s
82%
Ripple Current
Uout Max.
Turn-on Time
Operation Temp.
Case Temp. (Max.)
IP Rating
-20 ~ +50℃
75℃
IP20
-20 ~ +50℃
85℃
IP20
Dimming Interface Switch-Dim
EMC Standard
Safety Standard
Dielectric strength
Abnormal protection Output short-circuit protection, Overload Protection, Open-circuit Protection
Input output: 3000VAC / 5mA /1min
EN55015, EN61547, EN61000-3-2/-3-3, EN300328, EN301489-1/-17, EN62479
EN61347-1, EN61347-2-13
Output Conguration
Technical Specications
4 dBm
2.4 GHz - 2.483 GHz
Operation frequency
Transmission power
Range (Typical indoor)
Protocol
10~30m
Bluetooth Transceiver
5.0 SIG
Mesh
Fully support
EnOcean switch
EWSSB/EWSDB
HED6010/BT, 12.5W
Subject to change without notice. Edition: 19 Mar. 2021 Ver. Draft Page 2/10
HED1009/BT, 9W HED1025/BT, 25W
1 2
200mA
250mA
3 4
300mA
350mA
400mA
500mA
600mA
Warning: Please make sure the correct current is selected before starting the driver!
80%
700mA
650mA
600mA
550mA
500mA
450mA
400mA
350mA
300mA
2 3
14
HED1025/BT
0.140~0.125A
<3%
60V
<0.5s
85%
-20 ~ +50℃
85℃
IP20
HED1040/BT
0.210~0.200A
<3%
65V
<0.5s
-20 ~ +50℃
85℃
IP20
85%
0.9
0.071~0.065A
5.0 SIG mesh
Web app/platform: www.iot.koolmesh.com
Koolmesh Pro app for iPad
Smartphone app for both iOS & Android platform
for iOS for Android
for iPad
for Web
Web
iOS
Android
Draft
Draft
HED6010/BT 2.5- 12.8W/ 350mA /6-36V 2.5-12.8W/ 400mA /6-32V 3-12.5W/ 500mA /6-25V
1.5-8W/ 195mA /6-41V 1.5-9W/ 230mA /6-41V 1.5-10W/ 250mA /6-41V 2-12W/ 300mA /6-41V
2-6W/ 200mA /6-28V 2-9W/ 400mA /6-22V 2-9W/ 600mA /6-15V
2-15W/300mA /6-48V
HED1009/BT
HED1025/BT
Model No. Max. output power/current/voltage range
HED6010/BT, 1x10W
150
52
28
122.8
4.1
L
N
P1
P2
LED+
LED−
HED1009/BT, 1x9W
Mechanical Structure & Dimensions
Subject to change without notice. Edition: 19 Mar. 2021 Ver. Draft Page 3/10
2-17W/350mA /6-48V 2-20W/400mA /6-48V 3-22W/450mA /6-48V
3-24W/500mA /6-46V 3-24W/550mA /6-44V
P1
P2
N
L
LED Current Selection
LED−
LED+
120
30
21
4.5
Ø
4.5
110.5
4-25W/600mA /6-42V 4-25W/650mA /6-38V
4-25W/700mA /6-36V
Draft
Draft
HED1025/BT, 1x30W
Subject to change without notice. Edition: 19 Mar. 2021 Ver. Draft Page 4/10
4.2
233.6
245
3
25.5
21
P1
P2
N
L
LED Current Selection
LED−
LED+
HED1040/BT, 1x40W
Wire Preparation
0.5 - 1.5
mm
8mm
To make or release the wire from the terminal, use a
screwdriver to push down the button.
L
N
P1
P2
LED–
LED+
27
32
4.2
4.2
317.2
330
3
Draft
Draft
Subject to change without notice. Edition: 19 Mar. 2021 Ver. Draft Page 5/10
Model: HED1009/BT
Wiring Diagram
Note: There is no need for any hardwirings on "push" terminal between one driver to another. The installer only needs to connect the push switches
to the nearest driver to save labor and cost. The push switches can be assigned to control any Bluetooth driver through the app commissioning.
P1
P2
N
L
LED−
LED+
N L
N
L
LED−
LED+
P1
P2
P1
P2
Model: HED6010/BT
Note: There is no need for any hardwirings on "push" terminal between one driver to another. The installer only needs to connect the push switches
to the nearest driver to save labor and cost. The push switches can be assigned to control any Bluetooth driver through the app commissioning.
L
N
LED+
LED-
L
L
N
N
P1
P1
P2
P2
LED+
LED-
L
L
N
N
P1
P1
P2
P2
P1
P2
Draft
Draft
Subject to change without notice. Edition: 19 Mar. 2021 Ver. Draft Page 6/10
Model: HED1025/BT
Note: There is no need for any hardwirings on "push" terminal between one driver to another. The installer only needs to connect the push switches
to the nearest driver to save labor and cost. The push switches can be assigned to control any Bluetooth driver through the app commissioning.
P1
P2
N
LLED+
LED−
N L
P1
P2
N
LLED+
LED−
Model: HED1040/BT
Note: CH1 & CH2 are working independently, meaning that they cannot be used with luminaires that share “+”.
There is no need for any hardwirings on "push" terminal between one driver to another. The installer only needs to connect the push switches
to the nearest driver to save labor and cost. The push switches can be assigned to control any Bluetooth driver through the app commissioning.
L
N
L
N
P1
P2 LED–
LED+
L
N
P1
P2 LED–
LED+
Draft
Performance Characteristics
Circuit Breaker Information
Automatic circuit breaker type B16A B10A B13A B20A B25A
142
HED6010/BT 89 115 178 222
HED1009/BT
HED1025/BT
Subject to change without notice. Edition: 19 Mar. 2021 Ver. Draft Page 7/10
The data above is calculated according to the formula: Maximum Amount = 16/(Pn/230). In order to provide a more reliable
reference in real application, the data have been revised to take 60% of the number calculated, i.e. 16/(Pn/230) x 60%.
Please kindly take note that the calculation is based on ABB circuit breaker series S200. Actual values may differ due to different
types of circuit breaker used and installation environment.
Loading and In-rush Current
176 110 143 220 276
73 46 59 92 115
Pulse Time
Model HEC6010/BT
In-rush Current (Imax.)
30 μs
23A
HEC1025/BT
18 μs
22A
HED1040/BT
15 μs
25A
HED1040/BT 41 26 33 52 65
Draft
Draft
220V
230V
240V
0.60
0.65
0.70
0.75
0.80
0.85
0.90
PF
0
50% 60% 70% 80% 90% 100% LOAD
* Typical Power Factor vs Load
* Typical Efciency vs Load
195mA
350mA
500mA
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
50% 60% 70% 80% 90% 100% LOAD
EFFICIENCY
HED1009/BT
Subject to change without notice. Edition: 19 Mar. 2021 Ver. Draft Page 8/10
* Typical Power Factor vs Load
B25A
220V
230V
240V
PF
LOAD
0
0.84
0.86
0.88
0.90
0.92
0.94
0.96
0.98
1.00
50% 60% 70% 80% 90% 100%
HED6010/BT
195mA
350mA
500mA
EFFICIENCY
* Typical Efciency vs Load
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
50% 60% 70% 80% 90% 100% LOAD
HED1040/BT
EFFICIENCY
350mA
700mA
850mA
LOAD
* Typical Efciency vs Load
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
50% 60% 70% 80% 90% 100%
* Typical Power Factor vs Load
220V
230V
240V
0.5
0
0.6
0.7
0.8
0.9
1.0
50% 60% 70% 80% 90% 100% LOAD
HED1025/BT
350mA
500mA
700mA
EFFICIENCY
* Typical Efciency vs Load
0.5
0
0.6
0.7
0.8
0.9
1.0
50% 60% 70% 80% 90% 100% LOAD
PF
Draft
Draft
* Typical Power Factor vs Load
220V
230V
240V
PF
0.60
0.65
0.70
0.75
0.80
0.85
0.90
50% 60% 70% 80% 90% 100% LOAD
0
Subject to change without notice. Edition: 19 Mar. 2021 Ver. Draft Page 9/10
80% 90% 100%
Dimming Characteristics
Power output(%)
Dim Level
1% 10% 20% 30% 40% 50% 60% 70%
Dim Level
Power output(%)
0
10
20
30
40
50
60
70
80
90
100
0
10
20
30
40
50
60
70
80
90
100
10 20 50 100
Dimming Prole
Dimming Interface Operation Notes
Switch-Dim
The provided Switch-Dim interface allows for a simple dimming method using commercially available non-latching (momentary) wall switches. Up
to 64 LED drivers maybe connected to one switch. Detailed Push switch congurations can be set on Koolmesh app.
Short press (<1 second)
* Short press has to be longer than
0.1s, or it will be invalid.
- Turn on/off
- Turn on only
- Turn off only
- Recall a scene
- Exit manual mode
- Do nothing
- Dimming
- Do nothing
- Upgrade a normal on/off motion sensor
to a Bluetooth controlled motion sensor
- Turn on only
- Turn off only
- Recall a scene
- Exit manual mode
- Do nothingDouble push
Long press (≥1 second)
ActionSwitch Function
Push switch
Simulate sensor /
Descriptions
1% 100% 10% 0
Light
Output
PWM
Duty Cycle (for HED6010/BT only)
PWM AnalogueOFF
10-100% Analogue
Dimming range
0-1%
1-10% PWM
OFF
Dimming technique
Draft
Draft
Subject to change without notice. Edition: 19 Mar. 2021 Ver. Draft Page 10/10
Additional Information / Documents
1. Regarding precautions for LED driver installation and operation, please kindly refer to
www.hytronik.com/download ->knowledge ->LED Drivers - Precautions for Product Installation and Operation
2. To learn more about detailed product features/functions, please refer to
www.hytronik.com/download->knowledge ->Introduction of App Scenes and Product Functions
3. Regarding precautions for Bluetooth product installation and operation, please kindly refer to
www.hytronik.com/download ->knowledge ->Bluetooth Products - Precautions for Product Installation and Operation
4. Data sheet is subject to change without notice. Please always refer to the most recent release on
www.hytronik.com/products/bluetooth technology ->Bluetooth Drivers
5. Regarding Hytronik standard guarantee policy, please refer to
www.hytronik.com/download ->knowledge ->Hytronik Standard Guarantee Policy
Draft
Draft
/