Rugged Ridge 11642.11, 11642.10, 11642.12 Installation guide

  • Hello! I've reviewed the installation instructions for the Rugged Ridge Splash Guards (models 11642.10, 11642.11, 11642.12). This document details how to install front and rear splash guards on Jeep JK vehicles. It includes instructions for removing factory rivets, drilling holes, and attaching the guards using provided hardware. I'm ready to answer any questions you have about the installation process or the included components.
  • What kind of vehicles are these splash guards designed for?
    What is included in the front kit?
    What is included in the rear kit?
460 Horizon Drive #400 | Suwanee, GA 30024 USA | www.omix-ada.com | Copyright © 2013 Omix-Ada®, Inc.
• Splashguardarearedesignedtobettedtofactoryfrontaresandfactoryrearbumper.
Page 1/2
11642.11FrontKit
11642.12RearKit
11642.10Front+RearKit
JEEP® JK SPLASH GUARDS
OMIX-ADA® TECHNICAL SUPPORT
PHONE: M-F8am-5pmEST1-800-449-6649|EMAIL:[email protected]
FOR WARRANTY INFORMATION VISIT:www.Omix-Ada.com
Front Kit Contents:
• (2)FrontSplashGuard
• (12)LongPhillipsHead
Screw
• (12)Washers
• (12)Clip-onNut
Rear Kit Contents:
• (2)RearSplashGuard
• (8)ShortPhillipsHead
Screw
2.Usesplashguardasaguidetomarkguideholes.
Drillintomarksmadeusinga13/64drillbit.
1.Removethefactoryrivetlocatedinthelowercornerofthe
factoryfenderare.
Placefrontsplashguardagainstfactoryfenderare.
NOTICE
460 Horizon Drive #400 | Suwanee, GA 30024 USA | www.omix-ada.com | Copyright © 2013 Omix-Ada®, Inc.
Page 2/2
3.Attachclip-onnuts.Attachsplashguardwithlongphillips
headscrewsandwashers.
4.Placerearsplashguardagainstfactorybumper.
6.Attachsplashguardwithshortphillipsheadscrews.
5.Usesplashguardasaguidetomarkguideholes.
Drillintomarksmadeusinga13/64drillbit.
JEEP® JK SPLASH GUARDS
11642.11FrontKit
11642.12RearKit
11642.10Front+RearKit
/