Julian Bowen FRI001 Assembly Instructions

Type
Assembly Instructions

This manual is also suitable for

Julian Bowen FRI001 is a sturdy fabric bed with a metal frame and wooden slats.

Here is some information about your new bed:

  • Approximate assembly time: 1 hour
  • People required to assemble: 1
  • Tools included with the product: No
  • Dimensions: 135cm wide
  • Weight: 70kg
  • Maximum weight capacity: 1220kg

To assemble your new bed, please follow the instructions provided in the assembly manual. We strongly advise against using power tools, as this may cause damage to the product and invalidate your warranty.

Julian Bowen FRI001 is a sturdy fabric bed with a metal frame and wooden slats.

Here is some information about your new bed:

  • Approximate assembly time: 1 hour
  • People required to assemble: 1
  • Tools included with the product: No
  • Dimensions: 135cm wide
  • Weight: 70kg
  • Maximum weight capacity: 1220kg

To assemble your new bed, please follow the instructions provided in the assembly manual. We strongly advise against using power tools, as this may cause damage to the product and invalidate your warranty.

Approximate Assembly Time
Version Number - 1.0
Tools RequiredPeople Required to Assemble
FABRIC BED 135CM
ASSEMBLY
INSTRUCTIONS
1hr
1470
1220
2090
Product Code-FRI001&FRI011
No Extra
Tools Required
No Extra
Tools Required
No Extra
Tools Required
2
8
Please check all hardware matches the list below. Should
you notice any are missing please contact your retailer.
We strongly advise that you do not use Power Tools, such as
drills or electric screwdrivers during the assembly as this
may cause irreparable damage and will invalidate your
warranty.
15x
B
30x
AM8x20mm
16x DSpring Washer
4x
EFlat Washer
12x
F
M6x20mm
4x I
4x25mm H
20x 1x L 1x R
M
M5
1x N
M4
1x
O
1x
2x
G
Please ensure you carefully check all the pieces, should you have any
concerns please contact the retailer before assembly commences.
Please have your order number, details of the issue, the product code,
and the batch number from the cartons as this will help us to resolve
your issue much faster.
1
4
4
2
3
3
3
3
5
6
7
7
(30x)
ASSEMBLY ADVICE
Please take the time to carefully read through these instructions
before you commence.
Keep these instructions for future reference.
We advise that the product is assembled in the room it is intended for.
We advise that you keep the hardware in a bowl during assembly to
avoid losing anything.
We strongly recommend that you keep children away from the work
area.
Small component parts could choke a child if swallowed.
We recommend you use a sheet or blanket to protect both floor and
product through the assembly stages.
Never push or pull the product as this could cause both personal injury
or irreparable damage to product or floor.
We have tried to make this piece of furniture easy to assemble if the
instructions are followed carefully.
In the unlikely event that you have problems with assembling the
product or have missing or damaged parts, please contact your
retailer and we will assist them in rectifying the problem as quickly as
possible.
Remember we strongly urge you DO NOT use power tools such as drill
or electric screwdrivers as this could cause irreparable damage to
your product and will invalidate your warranty.
5
D
M8x20mm
16x
F
8x
Flat Washer
L R
1x 1x
H
20x
4x25mm
4
G
G
L
R
D
L
4
1
2
24
D
F
G
D
1
4
G
1
4
F
L
4
4
1
2
3
3
3
3
H
3
4
2
2x
G
D
M8x20mm
4x
I
4x
M6x20mm
4
4
1
2
6
7
7
1
I
6
D
A
30x
B
15x
B
AA
55
GENERAL CARE & MAINTENANCE
We advise that when cleaning the product that a damp cloth is used.
Avoid the use of all household cleaners and abrasive.
Never push or drag the furniture.
Never attempt to move the furniture when fully loaded.
We advise that periodically all fixing are re-tightened.
B
6
A
5
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Julian Bowen FRI001 Assembly Instructions

Type
Assembly Instructions
This manual is also suitable for

Julian Bowen FRI001 is a sturdy fabric bed with a metal frame and wooden slats.

Here is some information about your new bed:

  • Approximate assembly time: 1 hour
  • People required to assemble: 1
  • Tools included with the product: No
  • Dimensions: 135cm wide
  • Weight: 70kg
  • Maximum weight capacity: 1220kg

To assemble your new bed, please follow the instructions provided in the assembly manual. We strongly advise against using power tools, as this may cause damage to the product and invalidate your warranty.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI